Abro Spray Paint Material Safety Data Sheet [best] (2026)

Abro Spray Paint — Material Safety Data Sheet (MSDS) — Summary Write-up

Product name: Abro Spray Paint Intended use: Aerosol spray paint for general-purpose coating on metal, wood, plastic and other surfaces.

Identification

Manufacturer/supplier: Abro Industries (or local distributor — insert specific contact details)
Emergency phone: (insert local emergency number)
Recommended use: Surface coating; professional and consumer use.
Restrictions: Not for food-contact surfaces; not for use in confined, unventilated spaces.

Hazard identification

Classification (GHS): Flammable aerosol; eye irritation (Category 2); skin irritation (Category 2) or drying/defatting (may be Category 3 depending on formulation); specific target organ toxicity — single exposure (Category 3 — narcotic effects) due to solvents; aspiration hazard if swallowed.
Signal word: Danger
Hazard statements (typical):
- Extremely flammable aerosol.
- Contains gas under pressure; may explode if heated.
- Causes serious eye irritation.
- May cause drowsiness or dizziness.
- May cause skin dryness or cracking.
- Harmful if inhaled; may cause respiratory irritation.
Precautionary statements (typical):
- Keep away from heat/sparks/open flames/hot surfaces — No smoking.
- Do not spray on an open flame or other ignition source.
- Pressurized container: Do not pierce or burn, even after use.
- Use only outdoors or in a well-ventilated area.
- Avoid breathing vapors/spray.
- Wash hands thoroughly after handling.
- If inhaled: Remove person to fresh air and keep comfortable for breathing; seek medical attention if symptoms persist.
- If in eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do — continue rinsing; get medical attention if irritation persists.
- Store in a cool, well-ventilated place away from direct sunlight and temperatures above 50°C/122°F.
- Dispose of contents/container in accordance with local/regional regulations.

Composition / information on ingredients (Provide exact concentrations from manufacturer; typical components include:)

Solvent naphtha / aliphatic hydrocarbons (e.g., petroleum distillates): 30–60%
Aromatic solvents (e.g., xylene, toluene, ethylbenzene): 5–25%
Acetone or methyl ethyl ketone (MEK): 0–15%
Propellant gases: propane, butane, isobutane, dimethyl ether: 5–25%
Pigments, resins, additives: balance
Note: List CAS numbers and exact % ranges as provided by product-specific MSDS.

First-aid measures

Inhalation: Move to fresh air; keep person at rest; if breathing is difficult, administer oxygen if trained; seek medical attention if symptoms persist or if unconscious — do not give mouth-to-mouth if suspected hydrocarbon exposure.
Skin contact: Remove contaminated clothing; wash skin with soap and water; if irritation persists, seek medical advice.
Eye contact: Rinse cautiously with water for at least 15 minutes; remove contact lenses; seek medical attention if irritation continues.
Ingestion: Do NOT induce vomiting; rinse mouth; seek immediate medical attention due to aspiration risk.

Fire-fighting measures

Suitable extinguishing media: Dry chemical, CO2, foam, water spray to cool containers.
Unsuitable: Straight water jet may spread fire.
Specific hazards: Extremely flammable; aerosol cans may explode when heated. Vapors are heavier than air and may travel to ignition sources.
Protective equipment for firefighters: Self-contained breathing apparatus (SCBA) and full protective clothing.

Accidental release measures

Personal precautions: Evacuate area; avoid inhalation; eliminate sources of ignition; use personal protective equipment (PPE) — respirator if ventilation inadequate, chemical-resistant gloves, goggles.
Environmental precautions: Prevent entry into drains, watercourses, or soil.
Cleanup methods: Absorb small spills with inert material (e.g., vermiculite); collect into suitable containers for disposal; ventilate area.

Handling and storage

Handling: Use only in well-ventilated areas or outdoors; avoid breathing vapors/spray; keep away from heat, sparks, open flames; ground/bond containers when transferring large quantities.
Storage: Store in a cool, dry, well-ventilated place away from heat and ignition sources; protect from sunlight; do not store above 50°C/122°F; keep containers tightly closed.

Exposure controls / personal protection

Occupational exposure limits: List applicable limits (e.g., OSHA/ACGIH) for major solvents (toluene, xylene, acetone, propellant gases) — insert local regulatory values.
Engineering controls: Local exhaust ventilation or spray booths to maintain exposures below limits.
Personal protective equipment (PPE):
- Respiratory: NIOSH-approved organic vapor respirator or supplied-air respirator if ventilation inadequate.
- Eyes: Safety goggles or face shield.
- Skin: Chemical-resistant gloves (nitrile), protective clothing.
- Hygiene: Wash hands and exposed skin after use; do not eat/drink/smoke in work area.

Physical and chemical properties (typical)

Appearance: Colored or clear aerosol spray
Odor: Solvent odor
Flash point: Highly flammable — propellant flammability; liquid portion may have low flash point (e.g., < 23°C)
Boiling point: Varies by solvent
Vapor pressure: High (aerosol)
Solubility: Insoluble in water; soluble in organic solvents
Specific gravity: Varies (typically 0.7–1.2)

Stability and reactivity

Stability: Stable under normal conditions.
Conditions to avoid: Heat, sparks, open flames, static discharge.
Incompatible materials: Strong oxidizers, strong acids, strong bases.
Hazardous decomposition products: Carbon oxides, hydrocarbons, smoke when burned.

Toxicological information

Acute effects: Inhalation may cause dizziness, headache, nausea, respiratory irritation; eye contact causes irritation; skin contact may cause dermatitis or defatting.
Chronic effects: Prolonged/repeated exposure to solvents may affect the central nervous system, liver, kidneys; some components (e.g., toluene, xylene, ethylbenzene) have reproductive or developmental toxicity warnings in specific circumstances — consult product-specific data.
Carcinogenicity: State carcinogen listings for ingredients if applicable (e.g., some solvents may be IARC listed) — include exact determinations from supplier MSDS.

Ecological information

Ecotoxicity: Harmful to aquatic life; avoid release to the environment.
Persistence and degradability: Components may be biodegradable but some hydrocarbons persist.
Bioaccumulative potential: Low to moderate depending on components.

Disposal considerations

Dispose of contents/container in accordance with local, regional, national regulations; do not puncture or incinerate aerosol cans.

Transport information

UN number and proper shipping name: UN1950 — Aerosols, flammable (for flammable formulations).
Transport hazard class: 2 (flammable gas) / Division 2.1 depending on regulation.
Packing group and labels: Follow applicable DOT, IATA, IMDG rules. Mark containers as hazardous.

Regulatory information

Include applicable national/regional regulations (e.g., EPA, OSHA, WHMIS, EU CLP) and inventory listings for ingredients.
Indicate VOC content (%) if required by local regulations.

Other information

Prepared/revision date: April 10, 2026
Disclaimer: Information provided is a general MSDS-style summary. For compliance, safety planning, and legal requirements, obtain the official, product-specific Safety Data Sheet from the manufacturer/distributor and include exact CAS numbers, concentrations, and local regulatory values.

If you want, I can: provide a formatted full MSDS document ready for printing with placeholders filled (company details, CAS numbers, exact concentrations, exposure limits) — tell me the exact product variant and manufacturer contact details.

Related search suggestions will be prepared.

The ABRO Spray Paint Material Safety Data Sheet (MSDS), now commonly referred to as a Safety Data Sheet (SDS), is a critical document that outlines the chemical properties, health hazards, and safety protocols for using ABRO aerosol paints. This guide breaks down the essential sections of the SDS to help users handle, store, and dispose of the product safely. 1. Product Identification and Composition

ABRO spray paints are categorized as fast-drying aerosol coatings suitable for both interior and exterior use. The SDS identifies several key chemical components that contribute to its performance and its hazard profile:

Propellants: Typically includes liquefied gases like propane and butane to provide the necessary pressure. abro spray paint material safety data sheet

Solvents: Volatile Organic Compounds (VOCs) such as acetone, toluene, xylene, and light aliphatic hydrocarbon solvents.

Pigments and Binders: Materials that provide color and adhesion to surfaces. 2. Hazard Identification

The SDS classifies the product under several physical and health hazard categories:

Physical Hazards: It is an extremely flammable aerosol. The pressurized container may burst if heated. Health Hazards:

Inhalation: High concentrations of vapors can cause dizziness, headaches, nausea, or central nervous system (CNS) depression. Abro Spray Paint — Material Safety Data Sheet

Skin/Eye Contact: May cause serious eye irritation and skin irritation or dermatitis upon repeated exposure.

Chronic Exposure: Prolonged exposure is suspected of causing cancer and may damage organs like the liver and blood system. 3. First Aid Measures

In the event of accidental exposure, the ABRO Safety Data Sheet recommends the following immediate actions:

Inhalation: Move the victim to fresh air immediately. If breathing is difficult, seek medical attention.

Eye Contact: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present and easy to do. Identification

Skin Contact: Wash thoroughly with plenty of soap and water. Remove contaminated clothing and wash before reuse.

Ingestion: Do not induce vomiting. Rinse mouth and contact a physician or poison control center immediately. Abro Spray Paint Material Safety Data Sheet

14. Transport Information

UN Number: UN1950 (Aerosols).
Proper Shipping Name: Aerosols, flammable.
Transport Hazard Class: Class 2.1 (Flammable Gas).
Marine Pollutant: Yes (if containing certain pigments).

10. Stability and Reactivity

Stability: Stable under normal conditions.
Incompatibilities: Strong oxidizers, acids, alkalis, and reactive metals.
Hazardous decomposition: Carbon monoxide, carbon dioxide, and smoke upon combustion.

6. Accidental Release Measures

Personal Precautions: Ventilate area. Remove ignition sources.
Clean-up: Absorb spills with inert material (sand, earth). Do not flush into sewers.

4. First-Aid Measures

Inhalation: Remove to fresh air. If breathing is difficult, administer oxygen. If not breathing, give artificial respiration. Get medical attention.
Skin contact: Wash with soap and water. Remove contaminated clothing. If irritation persists, see a doctor.
Eye contact: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present. Get medical attention.
Ingestion: Do not induce vomiting due to aspiration risk. Rinse mouth. Get immediate medical attention.

Section 10: Toxicological & Ecological Information

Toxicological:

Acute toxicity: LD50 for toluene (oral) ~ 5000 mg/kg (rat). However, inhalation is the primary route of exposure. LC50 (inhalation) < 1000 ppm/4h.
Chronic effects: Prolonged overexposure to toluene may cause permanent brain and nervous system damage (toluene syndrome – loss of coordination, speech, vision). Abro is reformulating some lines, but old stock may contain benzene (leukemogen).

Ecological:

Toxicity to fish: Highly toxic – LC50 < 100 mg/L for many species.
Persistence: Low biodegradability in water. Do not rinse cans in drains.
Ozone: Early Abro aerosols used chlorofluorocarbons? No – modern Abro uses hydrocarbon propellants (VOCs), which contribute to ground-level ozone (smog), not stratospheric ozone depletion.