Acer Q65h2-am V1.1 Manual Link

Note: The specific manual for the exact revision "Q65H2-AM v1.1" is not typically published as a standalone document by Acer for public download, as this model number usually refers to the motherboard found inside specific Acer desktop series (most commonly the Aspire XC-1760 or similar compact desktops).

Below is a comprehensive User Guide and Technical Reference compiled based on the specifications and layout of the Acer Q65H2-AM motherboard.


7. Warranty & support

3. Installation & setup (step-by-step)

  1. Place monitor on a stable surface; remove protective film.
  2. Attach base to stand using provided screws; tighten securely.
  3. Connect video cable to source (prefer DisplayPort or HDMI for higher refresh/resolution).
  4. Connect power cord and plug into grounded outlet.
  5. Power on monitor and connected device.
  6. Open OSD menu to: set input source, adjust brightness/contrast, choose color preset (Standard/Game/Movie), and set aspect ratio.
  7. If ideal image is required, run software/hardware color calibration.

4. Front Panel Header Pinout (The Crystal Clear Guide)

The most requested section of any Acer Q65H2-AM v1.1 manual is the front panel connector. Acer uses a non-standard layout compared to Intel’s standard. Do not guess—you will short the board. acer q65h2-am v1.1 manual

Location: Bottom right corner. Labeled "F_PANEL" (6x2 pins, but pin 10 is missing).

Here is the exact pinout looking at the board with the PCIe slots pointing down: Note: The specific manual for the exact revision

| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Button (+) | | 7 | Ground | 8 | Power Button (-) | | 9 | Reserved | 10 | Key (Missing pin) | | 11 | Ground | 12 | Speaker (5V) |

How to wire this:

Executive Summary

The Q65H2-AM V1.1 is a proprietary motherboard designed and manufactured for Acer specifically for their desktop series (most notably the Acer Aspire XC-605 and similar compact form-factor PCs). It utilizes the Intel H61 Express Chipset (Socket LGA 1155).

Because this is an OEM (Original Equipment Manufacturer) board, a traditional "retail" manual with pinout diagrams and BIOS tuning guides does not exist for the general public. Instead, support is fragmented into the User Manuals for the specific computer cases they inhabit. Locate warranty duration and conditions in manual; keep


Note: The specific manual for the exact revision "Q65H2-AM v1.1" is not typically published as a standalone document by Acer for public download, as this model number usually refers to the motherboard found inside specific Acer desktop series (most commonly the Aspire XC-1760 or similar compact desktops).

Below is a comprehensive User Guide and Technical Reference compiled based on the specifications and layout of the Acer Q65H2-AM motherboard.


7. Warranty & support

3. Installation & setup (step-by-step)

  1. Place monitor on a stable surface; remove protective film.
  2. Attach base to stand using provided screws; tighten securely.
  3. Connect video cable to source (prefer DisplayPort or HDMI for higher refresh/resolution).
  4. Connect power cord and plug into grounded outlet.
  5. Power on monitor and connected device.
  6. Open OSD menu to: set input source, adjust brightness/contrast, choose color preset (Standard/Game/Movie), and set aspect ratio.
  7. If ideal image is required, run software/hardware color calibration.

4. Front Panel Header Pinout (The Crystal Clear Guide)

The most requested section of any Acer Q65H2-AM v1.1 manual is the front panel connector. Acer uses a non-standard layout compared to Intel’s standard. Do not guess—you will short the board.

Location: Bottom right corner. Labeled "F_PANEL" (6x2 pins, but pin 10 is missing).

Here is the exact pinout looking at the board with the PCIe slots pointing down:

| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Button (+) | | 7 | Ground | 8 | Power Button (-) | | 9 | Reserved | 10 | Key (Missing pin) | | 11 | Ground | 12 | Speaker (5V) |

How to wire this:

Executive Summary

The Q65H2-AM V1.1 is a proprietary motherboard designed and manufactured for Acer specifically for their desktop series (most notably the Acer Aspire XC-605 and similar compact form-factor PCs). It utilizes the Intel H61 Express Chipset (Socket LGA 1155).

Because this is an OEM (Original Equipment Manufacturer) board, a traditional "retail" manual with pinout diagrams and BIOS tuning guides does not exist for the general public. Instead, support is fragmented into the User Manuals for the specific computer cases they inhabit.