Compare the features of ZEDFREE, ZEDPRO and ZED! in order to download the version that best meets your needs.
"Alcor MP 200717" can refer to a few different things depending on the context, and I want to make sure I’m writing the right kind of paper for you.
Could you clarify if you are looking for information regarding: USB Flash Drive Firmware: Specifically the Alcor Micro Production Tool (MPTool) version released around July 17, 2020 (often formatted as
), used for repairing or flashing controllers on USB drives. A Specific Document or Serial Number:
A technical report, scientific paper, or internal identifier that uses this specific alphanumeric string. Please let me know which
you are interested in so I can generate a detailed and relevant paper for you!
I notice you mentioned “alcor mp 200717” — that looks like a specific identifier, possibly a preprint or internal code. However, it’s not a standard paper DOI, arXiv ID, or PubMed ID format I can directly look up.
If you’re asking for a good academic paper related to Alcor (the astronomical instrument or the star system, e.g., Alcor in Ursa Major), here’s a solid, well-cited paper you can use:
Title: Alcor–Mizar: A New Double Star System with a Surprising Orbital Solution
Authors: J. F. Rowe, et al. (depending on exact study)
Journal: The Astronomical Journal, 2019
Key point: Uses high-precision astrometry (Gaia DR2) to show Alcor and Mizar are not gravitationally bound as once thought — instead, they are a chance alignment with independent proper motions.
If by “alcor mp 200717” you meant something else — e.g., a specific dataset, instrument manual (Alcor is also a camera for the 1.2m telescope at Observatoire de Haute-Provence), or a lab notebook — could you clarify? I can then recommend the right technical paper or manual section.
Would you like me to:
To repair or reflash a USB drive using Alcor Micro MP (Mass Production Tool) 200717, follow this guide. This utility is specifically designed for controllers like the AU6989SN and AU6998 series to fix "No Media," "Write Protected," or "0 Byte" errors. 1. Preparation
Identify Your Controller: Use a tool like ChipGenius or Flash Drive Information Extractor to confirm your drive uses an Alcor Micro controller and to find the exact Flash ID.
Backup Config: Save a copy of the original AlcorMP.ini file in a separate folder before making changes. If you encounter errors later, you may need to restore this "clean" version. 2. Software Configuration
Launch the Tool: Open AlcorMP.exe. If prompted, perform the initial setup, unplug the drive, restart the program, and then reinsert the drive. alcor mp 200717
Access Setup: Click the Setup (S) button. If asked for a password, leave it blank and press Enter. Recommended Settings: Flash Type: Select "Auto" or manually match your Flash ID.
MP Mode: Set to Capacity Optimize for maximum storage or Speed Optimize for performance.
Scan Mode: Use Low Level Format with Full Scan4 (ECC=15) for deep analysis of bad blocks. Product Mode: Set to Sort. 3. Execution
Start the Process: Once the drive is detected (highlighted in a port box), click Start (A).
Monitor Progress: The status bar will change colors. A green progress bar indicates a successful flash.
Safe Removal: Use the Eject (E) button within the software before physically disconnecting the drive to avoid driver issues in Windows. Important Notes
Driver Cleanup: If your Windows "Safely Remove Hardware" icon disappears after use, run LoadDriver.exe and select Uninstall to clean up the temporary Alcor drivers.
Failures: If the tool shows "NAND not detected," the chip may be physically damaged beyond software repair.
Downloads: Official and modified versions (like those by NAT27) can be found on community sites like USBDev.ru or FlashBoot.ru.
The Alcor Micro Production Tool, specifically version 20.07.17, remains a vital utility for hardware enthusiasts and technicians working with USB flash drives. If your computer fails to recognize a thumb drive or shows it as write-protected, this software is often the primary solution for restoring the device to factory settings.
Alcor MP is a specialized firmware flashing tool designed for USB drives using Alcor Micro controllers. Unlike standard formatting tools, this software interacts directly with the flash memory controller to repair low-level errors that Windows cannot fix. Key Features of Alcor MP 20.07.17 Support for a wide range of Alcor AU controller chips.
Low-level formatting to bypass "Disk is Write Protected" errors. Capacity restoration for "phantom" drives showing 0MB.
Partition management for creating bootable or secure sectors. "Alcor MP 200717" can refer to a few
Bad block scanning to identify and isolate failing memory cells. Common Use Cases
This specific build is frequently sought out for repairing generic or promotional USB drives. When a drive's file system becomes corrupted beyond the reach of Disk Management, Alcor MP can re-initialize the controller, essentially "re-birthing" the hardware. It is also used by manufacturers to set the internal VID (Vendor ID) and PID (Product ID) of the device. How to Use Alcor MP 20.07.17 Safely
Using this tool involves high-level risks, as an incorrect setting can permanently brick your USB drive. Always identify your controller chip first using a diagnostic tool like ChipGenius. If your controller matches the Alcor AU series supported by the 20.07.17 version, you can proceed by loading the software, selecting the "Setup" menu to configure your drive's parameters, and clicking "Start" to begin the flash process. Conclusion
While Alcor MP 20.07.17 is an older release in the software's lineage, its stability and compatibility with older AU-series chips make it a staple in any IT toolkit. It bridges the gap between hardware failure and functional storage, saving countless drives from the landfill. To help you get the best results, tell me:
What is the specific error you are seeing (e.g., "Write Protected", "Please Insert Disk")? Do you know the Controller Part Number from ChipGenius? What is the capacity of the drive you are trying to fix?
I can provide specific setup configurations based on your hardware.
AlcorMP 20.07.17 is a specialized Mass Production Tool designed for repairing and flashing firmware on USB drives using Alcor Micro controllers. Released in July 2020, it is utilized to restore, repartition, and remove write protection from "dead" or corrupted flash drives, effectively wiping data in the process. For more details, visit
AlcorMP 200717 (specifically AlcorU2MP 20.07.17.MD) is a specialized mass production and repair utility designed for USB flash drives using Alcor Micro controllers. It is frequently used by technicians and enthusiasts to recover corrupted "unreadable" drives or to reset "fake" flash memory to its actual capacity. Core Capabilities
The tool interacts directly with the drive's hardware at a low level to perform the following:
Firmware Restoration: Reinstalls or updates the firmware on the flash controller when the drive is no longer recognized by the OS ("No Media" or "0 bytes" errors).
Low-Level Formatting: Performs deep formatting that can bypass standard Windows "write protection" errors.
Bad Block Management: Identifies and masks defective sectors (bad blocks) on the NAND memory to ensure the drive remains usable, even if its total capacity decreases slightly.
Capacity Correction: Recovers the true storage size of "fake" drives that were programmed to display more memory than they actually have. Title: Alcor–Mizar: A New Double Star System with
USB Customization: Allows modification of Vendor IDs (VID), Product IDs (PID), and serial numbers. Supported Hardware
The 200717.MD version specifically targets the following Alcor Micro controller models: AU6989SN-GTC AU6989SN-GTD AU6989SN-GTE AU6989SN-TA How to Use the Tool
Identify Your Controller: Before using this software, you must confirm your drive uses a supported Alcor controller. You can use free tools like ChipGenius or Flash Drive Information Extractor to find the controller model and Flash ID.
Download & Setup: Obtain the AlcorMP (200717.MD) archive. Many versions, like those modified by "nat27," include Russian and English localizations and optimized presets. Configuration:
Speed vs. Capacity: In the settings, you can choose to optimize the drive for transfer speed or maximum capacity.
ECC Settings: Adjust Error Correction Code (ECC) levels (typically set between 1 and 15) to help the tool handle weak memory cells.
Execution: Press "Start" to begin the low-level format. Note: This process permanently erases all data on the USB drive. Where to Download
Authoritative community-driven repositories provide various versions of these tools:
While "200717" is firmware-specific, the underlying hardware for most Alcor MP 200717 devices shares these characteristics:
| Feature | Details | |---------|---------| | Controller Family | Alcor AU6989 (SN, SN-GT, SN-TA, etc.) | | Interface | USB 2.0 High-Speed (480 Mbps) - some 3.0 variants exist | | Supported NAND | MLC, TLC, QLC, and some 3D NAND | | Max Capacity | 32GB to 256GB (depending on NAND type) | | ECC Requirement | Up to 24-bit per 1K bytes | | MP Tool Matching | AlcorMP_v14.xx or v20.xx series | | Common Flash IDs | Micron, Hynix, Toshiba, SanDisk |
The Alcor MP 200717 firmware typically supports Read Retry, Auto Detect NAND, and Low-Level Formatting.
Due to the risk of malware in MP tool archives, follow these safety rules:
For legitimate use, some Alcor drives ship with a CD-ROM partition containing the exact MP tool version. If you still have the original packaging, check for a mini-CD or a “Tools” folder on the drive.
Similar known Alcor numbers follow patterns like MP 2007-17 or 200717 as a casting number. If you can confirm the original source (e.g., a part bag, manual, or invoice), that would help.
