Alps Tb8163p3-bsp

Alps TB8163P3-BSP refers to a specific hardware and Board Support Package (BSP) configuration, typically associated with imaging sensors or camera modules integrated into mobile or embedded devices. Based on hardware diagnostic databases, this model is identified as a 2.1 Megapixel camera system. Camera FV-5 Key Specifications Resolution & Image: Maximum Resolution: (Full HD). Effective Pixels: 2.1 Megapixels. Format Support: Primarily supports image output. Focal Length:

3.3 mm (roughly equivalent to 37.1 mm on a 35mm full-frame sensor). Field of View (FOV): 51.7 raised to the composed with power Horizontal and 40.0 raised to the composed with power Fixed-focus type (no autofocus). Sensor Details: Pitch Size: Sensor Area: m m squared Exposure & ISO Control: ISO Range: 100–6400. Manual Exposure Range: Stabilization: EIS (Electronic Image Stabilization) Camera FV-5 Context and Usage

Based on the part number nomenclature and typical ALPS product lines, this usually relates to a Wireless LAN (Wi-Fi) and Bluetooth SDIO module (often utilizing a Realtek or Broadcom chipset). alps tb8163p3-bsp

Here is a detailed breakdown of the content, specifications, and technical context for the TB8163P3-BSP.

Part 6: Replacement and Sourcing (For Repair Shops)

If you are an automotive technician searching for alps tb8163p3-bsp, you are likely looking to replace a faulty unit. Here is the critical procurement advice: Alps TB8163P3-BSP refers to a specific hardware and

9. Comparison to Similar Models

| Model | Stroke | Closed-loop? | Typical Use | |-------|--------|--------------|--------------| | TB8163P3-BSP | 250 µm | Optional (BSP = ?) | High-end smartphone AF | | TB8163P3-CSP | 200 µm | No | Mid-range AF | | TB8163P3-ESP | 300 µm | Yes (Hall) | Premium telephoto |

Verify -BSP suffix with Alps Alpine official datasheet – it may indicate "B" = ball-bearing guide, "SP" = special stroke or spring. Part 6: Replacement and Sourcing (For Repair Shops)

Pinout and electrical connections

  • Pin arrangement (look at component with actuator toward you):
    • Left pin — end terminal 1
    • Middle pin — wiper (variable output)
    • Right pin — end terminal 2
  • For a simple voltage divider: connect end terminals across your fixed supply (e.g., 0–5 V) and take the wiper as the variable voltage output.
  • For use as a variable resistor (rheostat): use one end terminal and the wiper; leave the other end unconnected.

Example wiring (typical)

  • Using as voltage divider: Vcc to left end → wiper to ADC input → right end to GND. Add 0.1–1 µF bypass at Vcc and optional 10 kΩ series + 10–100 nF to filter wiper to ADC.

If you want, I can:

  • Find the exact manufacturer datasheet for TB8163P3-BSP and extract the precise dimensions, pin spacing, and electrical ratings.
  • Draw a PCB footprint (SVG) or supply a step‑by‑step soldering/reflow profile for the part.

Which of those would you like?

Testing & Reliability

  • Perform lifecycle testing at expected actuation force and duty cycle to confirm life rating.
  • Include contact resistance checks and bounce measurements during QA.
  • Test across operating temperature extremes if the device will be used outdoors or industrially.