Anytone 868 Codeplug Uk Link

The AnyTone AT-D868UV is a staple for DMR (Digital Mobile Radio) users in the UK, largely due to its versatility and the availability of pre-configured "codeplugs"—the configuration files that tell the radio which frequencies, talk groups, and zones to use. The Core Components of a UK Codeplug

A solid UK codeplug for the 868 typically organizes data into a "bottom-up" hierarchy: Digital Contacts/Talk Groups

: This is the foundation. In the UK, this includes essential groups like Talk Group 91 (Worldwide) TG 235 (UK Wide) , and regional groups (e.g., TG 2351 for South East

: Each channel combines a repeater's frequency (uplink/downlink), color code (usually CC1 in the UK), and a specific Time Slot (TS1 or TS2).

: These are folders used to group channels. A standard UK codeplug might have zones like "London Repeaters," "North West," or "Analog Calling" for easy navigation. anytone 868 codeplug uk

: Your unique 7-digit DMR ID must be entered into the "Radio ID" section of the CPS (Computer Programming Software) for the radio to transmit on digital networks. Where to Find UK Codeplugs

While many users eventually build their own, several trusted sources provide "Generic UK" starters:

: Known for providing a comprehensive "Generic UK Code Plug" that covers repeaters across the UK and Northern Ireland based on ETCC and RSGB data. AnyTone UK User Groups

: Community-driven groups often share updated .rdm or .csv files that include the latest local repeater changes. RadioID.net The AnyTone AT-D868UV is a staple for DMR

: Essential for downloading the global Digital Contact List so you can see names/call signs instead of just ID numbers. Critical Technical Tips CPS Version Matching

: Always use the CPS version that matches your firmware (e.g., CPS 1.26 for Firmware V1.26). Mixing versions can cause "Band Errors" or "Set Comm Data Errors". Read Before Write : Before uploading a new codeplug, always

the current data from the radio to a computer to ensure the COM port is communicating correctly and to keep a backup. Digital Monitor

: For UK users who want to hear traffic on any Talk Group on a repeater without specifically programming it, ensure "Digital Monitor" (or "Promiscuous Mode") is enabled. Hardware Variants Radio identity

: Be aware that the 868 has two hardware versions (V1.0 and V1.1). Ensure you are using the correct firmware for your specific hardware before applying a codeplug. Migrating to Newer Models

How to find a code plug for Anytone 868UV band 11? - Facebook

Key components to include in a UK-focused AnyTone 868 codeplug

• Radio identity
  • Callsign: your amateur callsign (if using ham bands).
  • Radio ID: correct DMR ID assigned to your callsign (e.g., via RadioID.net).
  • Alias/Contact name: readable label for your ID.
• Zones and channels
  • Zones: group by purpose — “UK Repeaters”, “DMR Networks”, “Local Simplex”, “PMR446” (if you program analog PMR446 remember these are license-free and power-limited).
  • Channels: each entry with Name, RX/TX frequencies, Color Code (CC), Time Slot (TS), Contact/TG, Power (Low/High compliant with local limits), Channel Mode (Digital/Analog), Squelch, Bandwidth, and Tx Limit.
• Contacts / Talkgroups
  • Local repeater TGs: Common UK TGs such as TG9 (local), TG234 (England), TG235 (Wales), TG236 (Scotland) — verify current TG numbering with your target network.
  • National/Regional TGs: BrandMeister national TGs and regional reflectors (check master list).
  • Local users and reflectors: DMR IDs for regular contacts (friends, club repeaters).
• Networks and hotspots
  • BrandMeister: define master IP (or hostname) and port for the UK region and add corresponding talkgroups. Prefer the nearest master for lower latency.
  • DMR+: if used, add UK nodes and TGs.
  • Pi‑Star hotspot: include local hotspot frequency and matching CC/TS/TG for private or local nets.
• Repeater templates
  • Standard repeater entry: name, receive frequency, transmit frequency, CC, TS, TG (usually TG9 or local), RxGroup list if needed, DTMF or analog tones if repeater requires.
  • Off-air checks: entries for monitoring without keying (RX only).
• Analog channels
  • PMR446: channel list with CTCSS/DCS as required (note legal PMR446 limits: 0.5–2 W depending on equipment; do not exceed).
  • Local analog repeaters: tone (CTCSS/CTCSS decode), offset, and power settings.
• Scan lists
  • Combine zones or selected channels for monitoring clusters of repeaters or local traffic.
• Function keys and shortcuts
  • Assign keys for quick TG switching, monitor, scan on/off, power toggle, hotspot enable, and emergency channel.
• Safety & compliance
  • Power limits: use power settings that comply with UK amateur and PMR rules (ham operators may use higher power per license; PMR446 must remain within legal limits).
  • IDs and licensing: transmit only on frequencies and modes you’re authorized to use. Use your DMR ID and callsign as required.
• Backup and versioning
  • Keep backups of working codeplugs with date-stamped filenames and a short change log of edits (channels added/removed, TG changes).
  • Keep one clean “factory-like” baseline and one active user file.

What is a Codeplug?

Simply put, a codeplug is the configuration file for your radio. It contains all the frequencies, repeater offsets, colour codes, and contact lists (the "Digital Contact List") required to communicate. While you can build one from scratch, downloading a pre-made UK codeplug saves you hours of data entry.

6. Emergency & Safety Channels

| Channel | Frequency | Use | |---------|-----------|-----| | 145.500 | 2m Calling | Simplex – monitored sporadically | | 433.500 | 70cm Calling | Simplex – quieter | | CB CH19 (RX) | 27.78125 | UK CB (AM/FM – if radio supports) | | Marine 16 (RX) | 156.800 | Distress – monitor only |

---

1. The Anytone UK Facebook Group

Search for "Anytone 868 878 UK User Group." In the 'Files' section, you will find several community-maintained codeplugs. Look for ones updated within the last 6 months, as repeaters change frequencies and talkgroups evolve.

7. Final UK-Specific Tweaks

• Band limits: Set RX to 136-174 MHz & 400-480 MHz (fits all UK amateur and PMR446 listen-only).
• Power levels: Default to Medium (4W). High (7W) only for fringe repeaters—your battery will thank you.
• Roaming: Turn it OFF. UK repeater roaming is a battery-draining mess unless you’re truly mobile.

Steps to Create a Basic Codeplug