v1.1 GPS R-Link 2019
Aovo Pro Firmware B-01.0.11k is a legacy version of software used to unlock higher top speeds on Aovo Pro electric scooters, which are popular clones of the Xiaomi M365 Pro.
While the official Aovo Pro app no longer supports this specific speed hack, users often seek this firmware to bypass the standard 25 km/h (15.5 mph) limit and reach speeds of up to Summary of the Speed Hack Process According to community reports on
, the firmware can be accessed through third-party applications: Alternative App : Users have found success using the (available on the Apple App Store ) instead of the stock Aovo Pro app. Installation Method Connect the scooter to the 365Go app. Navigate to Settings > Firmware Upgrade Select an available version to start the process.
Interrupting the update at roughly 10% and restarting the app may reveal B-01.0.11k as an "Available Version".
: After a successful installation, a new "Speed limit value" option (up to 45 km/h) typically appears under Advanced Settings Important Considerations Known Bugs
: This specific firmware version is known for a bug where the scooter's
can only be controlled through the mobile app, not the physical button on the scooter. Hardware Risks
: Be cautious with "fake" firmware or extreme speed increases; the Aovo's 350W motor and battery may not sustain high speeds for long periods, potentially leading to overheating or hardware failure.
The Quest for the Perfect Firmware
It was a typical Monday morning for John, a tech enthusiast and owner of an Aovo Pro scooter. As he was preparing for his daily commute, he noticed that his scooter's display was acting up, showing weird symbols and refusing to connect to his phone via Bluetooth. He tried restarting the scooter, but the issue persisted.
Frustrated, John decided to visit the Aovo Pro forums to see if other users had encountered similar problems. After browsing through several threads, he stumbled upon a post from a user who claimed to have fixed the issue by updating the firmware to version B-01.0.11k.
Intrigued, John clicked on the link provided in the post, which led him to a download page for the Aovo Pro Firmware B-01.0.11k. He hesitated for a moment, worried about the risks of updating the firmware, but his desire to fix the issue won over.
John carefully followed the instructions on the download page and began the update process. The scooter's screen went blank, and a progress bar appeared, indicating that the update was in progress. After what felt like an eternity, the scooter restarted, and John was relieved to see that the display was now functioning normally.
But that was not all - the update had also brought new features, such as improved regenerative braking and a more intuitive display interface. John was thrilled to explore these new features and test the scooter's performance.
As he took the scooter for a spin, John noticed that the update had indeed addressed the issues he was experiencing. The scooter's performance was smoother, and the display was responsive and easy to navigate.
Over the next few days, John continued to explore the new features and noticed that the scooter's battery life had also improved. He was impressed with the update and grateful to the Aovo Pro community for sharing the firmware and instructions.
The Aovo Pro Firmware B-01.0.11k Download
For those interested in downloading the Aovo Pro Firmware B-01.0.11k, here are the steps to follow:
Disclaimer: Updating the firmware can void the scooter's warranty and may potentially cause issues if not done correctly. Proceed with caution and at your own risk.
The Aovo Pro firmware version B-01.0.11k is a highly sought-after legacy update primarily used by the electric scooter community to bypass factory speed limiters. While newer official versions prioritize safety and stability, this specific build is famous for enabling an "advanced settings" menu that allows users to increase the scooter's top speed to approximately 28–30 mph (45 km/h). Key Features of Firmware B-01.0.11k
Riders often prefer this version because it provides more granular control over the scooter's hardware.
Speed Unlocking: The primary draw is the ability to adjust the "Speed limit value" in advanced settings beyond the standard 19 mph cap. Aovo Pro Firmware B-01.0.11k Download
Disabled Recovery (Regen): Unlike standard firmware, 11k often comes with "rekuperatsiya" (energy recovery) disabled by default, allowing for a smoother "coasting" (freewheeling) feel when you release the throttle.
Custom Parameter Tuning: Users can often tweak acceleration and braking response curves more freely than in newer, locked-down versions. Known Issues & Technical Bugs
Because this is an older or "glitchy" firmware version, it is not without risks:
Lighting Bug: A common issue with the 11k version is that the physical light button on the handlebars may stop working, requiring you to use the AovoPro app to turn the headlight on or off.
Power-Off Glitch: Some users report that the scooter may automatically turn back on immediately after you try to power it down.
Safety Warning: Increasing the speed limit can strain the motor and battery, potentially leading to overheating or "E3" error codes. How to "Download" and Install B-01.0.11k
You cannot typically find this version as a standalone file download on the official AovoPro website. Instead, the community uses a specific method involving the 365GO app, which often hosts legacy firmware lists that the official AovoPro app has removed.
Install the 365GO App: Search for "365GO" (blue icon) on the Apple App Store or Google Play. The official "black icon" AovoPro app generally does not offer the 11k version anymore.
Connect Your Scooter: Turn on your scooter and pair it via Bluetooth within the 365GO app. Firmware Downgrade/Upgrade: Navigate to Settings > Firmware Upgrade. Look for B-01.0.11k under the "Available Versions" list.
Pro Tip: If 11k isn't showing, some users start an update to a different version (like version 13) and force-close the app at 10% to "reset" the firmware mode, then reopen it to see the full list of legacy versions.
Finalize Speed Settings: Once installed, go to Advanced Settings and set the speed limit to your desired value.
Warning: Using unofficial apps or downgrading firmware may void your warranty or "brick" your controller if the process is interrupted. Always ensure your scooter is fully charged before attempting an update. AOVO PRO E-SCOOTER - HOW TO USE THE 365GO APP
The B-01.0.11k firmware for the Go to product viewer dialog for this item.
(typically the ES80/M365 clone) is a legacy version highly sought after by the enthusiast community because it lacks the strict speed limiters found in newer updates. While official sources often push users toward the newest versions, the 11k version is specifically used to unlock top speeds of up to 28-31 MPH (45 KM/H). How to Access and Download B-01.0.11k
You cannot typically find this firmware in the standard "AOVOPro" app (black icon). Instead, users rely on an alternative app interface to "downgrade" or select specific versions.
Required App: Download the 365GO App (often identified by a blue icon).
The "10% Glitch" Method: Some users report that to see the 11k version, you must start a different firmware update and close the app at exactly 10% completion. Upon reopening, the list of "Available Versions" may refresh to include B-01.0.11k.
Alternative Tools: For advanced users, the Smartphone Flash Tool can be used to flash stock ROMs directly via a PC connection, though this carries higher risk of bricking the device. Performance & Configuration
Once B-01.0.11k is installed, you must manually adjust the settings to realize the speed increase:
Speed Settings: Navigate to Advanced Settings -> Speed Limit Value. This firmware allows you to set the limit as high as 45 KM/H (approx. 28 MPH).
Known Bug: This specific firmware version often has a bug where the scooter’s headlight can only be toggled through the app, as the physical button may stop responding. Important Precautions Aovo Pro Firmware B-01
Hardware Limits: The Aovo Pro uses a 350W motor and a 36V battery. Consistently running at unlocked speeds can lead to overheating, reduced battery lifespan, or motor failure.
Password: If prompted for a password during the app connection, the default is frequently 888888.
Warranty: Flashing non-standard or older firmware usually voids the manufacturer's warranty and may be restricted by newer "locked" hardware versions. AOVO Pro no firmware available in app. : r/ElectricScooters
Aovo Pro Firmware B-01.0.11k Guide Firmware version B-01.0.11k is a legacy version for Aovo Pro electric scooters, primarily sought after by the enthusiast community for its ability to bypass standard speed limitations. ⚡ Key Features and Impact
This specific firmware version is distinct from modern updates because it allows users to access "Advanced Settings" that were restricted in later releases.
Speed Unlocking: Users report that this version enables a max speed setting of up to 28 MPH (45 KM/H).
Known Bugs: A common issue with this version is that the scooter's physical light button may stop working, requiring the light to be toggled exclusively via the mobile app.
Performance Note: While the display may show higher speeds, actual real-world speed is often limited by the scooter's battery and motor hardware (typically around 21-24 MPH). 📲 How to Access & Download
The official AovoPro app generally only offers the most recent, speed-restricted firmware. To find B-01.0.11k, users typically utilize the 365GO app (Blue icon) as a workaround. Firmware Rollback Method
Download the 365GO app from the Apple App Store or Google Play.
Connect to your scooter using the default password (often 888888). Go to Settings > Firmware Upgrade.
Initiate any available update. When the progress reaches 10%, force-close the app.
Re-open the app and return to the firmware menu. Version B-01.0.11k should now appear in the "Available Version" list for selection. ⚠️ Risks and Considerations
Hardware Strain: Running the motor at higher speeds than intended can lead to overheating or decreased battery lifespan.
Legal Compliance: Modifying speed limits may violate local micro-mobility laws regarding "unrestricted" electric vehicles on public roads.
Brick Risk: Any interrupted firmware update carries a risk of "bricking" the scooter, rendering it unusable without a hardware controller replacement.
🚀 Would you like instructions on how to access the "Secret Menu" for adjusting acceleration and braking sensitivity once you have the firmware? AOVO Pro no firmware available in app. : r/ElectricScooters
The Aovo Pro Firmware B-01.0.11k is a legacy firmware version widely known in the community for enabling a higher top speed on the Aovo Pro electric scooter. Key Features and Details
Unlocked Top Speed: This specific firmware version allows users to increase the scooter's maximum speed to approximately 45 km/h (28 mph), whereas the standard factory firmware typically limits the speed to 25–31 km/h.
Advanced Settings Access: Once installed, an option for a higher "Speed limit value" usually appears under the Advanced Settings menu in compatible apps.
Known Bug: A significant trade-off of this version is a firmware bug where the scooter's front light can only be controlled through the mobile app and cannot be toggled using the physical button on the scooter display. How to Access and Download Visit the Aovo Pro forums and search for
This version is typically not available on the official AovoPro Google Play app. According to user reports on Reddit and Imgur, it is often accessed through the following method:
Use the 365GO App: Users frequently download the 365GO app (blue icon) rather than the standard AovoPro app (black icon) to find this firmware version.
Firmware Menu: Within the app settings, it may appear under Firmware upgrade > Available Version.
Downgrade "Trick": Some users report having to start a different update and then cancel it around 10% to "force" the app to display older versions like B-01.0.11k.
Note: Flashing unofficial or legacy firmware carries risks, including potentially "bricking" your scooter or voiding your warranty. Official updates and manuals are available directly from the AOVOPRO Support site. If you'd like, I can help you:
Check if your scooter model is compatible with this specific hack. Find the latest official firmware version for your device.
Troubleshoot connectivity issues with the 365GO or AovoPro apps.
The most notable feature of the Aovo Pro Firmware B-01.0.11k ability to unlock the scooter's speed limit up to 45km/h (approx. 28 mph)
, which is significantly higher than the standard factory settings. Key Highlights of Firmware B-01.0.11k Enhanced Speed Ceiling
: Users have reported that this specific firmware version enables a 45km/h option
within advanced app settings, compared to the standard 25km/h or 31km/h limits found on newer versions. Third-Party App Compatibility : Because the official AovoPro app
often restricts these higher speeds in newer updates, enthusiasts frequently use the
to perform a "firmware downgrade" or specific flash to version 11k to bypass these restrictions. Known "Light" Bug
: An interesting (though unintended) side effect of this firmware is a software bug where the headlight can only be toggled via the app
; the physical power button shortcut on the scooter’s handlebars may stop working for the lights after the flash. How to Access This Version
To find and install this firmware, users often follow these steps: Download the
(often noted as working better on iOS for this specific hack). Navigate to Settings -> Firmware upgrade B-01.0.11k from the available versions list. Once installed, check Advanced Settings -> Speed limit value to adjust the top speed.
Increasing the speed beyond factory limits can void your warranty, decrease battery life, and may be illegal for use on public roads in certain regions. Always check your local regulations before modifying your scooter's performance. If you'd like, I can help you: step-by-step video guide for the installation. Troubleshoot connection issues between your phone and the Identify the legal speed limits for electric scooters in your specific country or city.
Yes. Aovo Pro does not charge for firmware updates. Any website asking for payment is a scam.
| Error | Solution | |-------|----------| | “Update failed” at 10% | Restart scooter, force-close app, re-pair. | | “No update available” | Your scooter may already be on a newer version (e.g., B-01.0.13k). | | Scooter won’t turn on after update | Perform battery reset: disconnect battery for 10 seconds (requires screwdriver). | | App crashes during update | Use a different phone (Android often more stable for Aovo updates). |
Users seek this specific firmware version for several reasons:
v1.1 GPS R-Link 2019