It sounds like you’re referring to ArtCut 2009 (likely a vinyl cutting or plotting software, similar to ArtCut or ArtPath, used with cutting plotters like those from GCC or other brands).
You’re looking for a way to install it without a CD — possibly because you lost the disc or your computer has no optical drive. The phrase “hot” might be a typo or refer to a “hot” (active/cracked) version or a “hotfix” for installation issues.
Here’s what you can try to install ArtCut 2009 without the CD:
Find the installer online – Search for ArtCut 2009 setup.exe or ArtCut 2009 installer. Check old software archives, CNET, or specialized forums for vinyl cutting software. Be cautious of malware.
Use a virtual CD drive – If you have an ISO image of the CD, mount it using WinCDEmu, Daemon Tools, or right-click → Mount (Windows 8/10/11).
Copy from another computer – If someone has the CD, copy the entire CD contents to a USB drive, then run setup.exe from there.
Crack or keygen – Many “no-CD” installations for older software involve using a crack to bypass the CD check. But these often carry viruses. Run them in a sandbox or virtual machine. artcut 2009 installation without cd hot
Alternative software – Since ArtCut 2009 is very old, consider using Sure Cuts A Lot, SignCut, VinylMaster, or Inkscape with the InkCut plugin (free) for modern cutting plotters.
If “hot” refers to “hotfix” — check if the installation fails with a specific error (like “Insert CD” or missing DLL). In that case, you might need to edit the registry or copy certain files manually to the install directory.
Would you like step-by-step instructions for installing without the CD using a common workaround, or are you looking for a clean ISO of ArtCut 2009?
Installing Artcut 2009 on modern computers without a physical CD drive is a common challenge, but it can be accomplished by using digital backups and virtual disc mounting
. Since Artcut 2009 typically requires a "Graphic Disc" (CD1) to be present for authorization, you must bypass this using an ISO image. Essential Preparation Download the Files
: You will need the digital installation files, often provided as a ZIP containing two folders: (the authorization/graphic disc) and (the software installer). Mounting Software : Download a tool like to create and mount virtual drives. Step-by-Step Installation Guide Install the Software (CD2) Locate the folder and run the It sounds like you’re referring to ArtCut 2009
Follow the prompts to install Artcut on your computer. It is recommended to install it in the default directory (usually C:\Artcut2009 Create and Mount a Virtual Graphic Disc (CD1) Open your virtual drive software (e.g., WinMount). Select all files inside the folder and "compress" or "convert" them into an
this newly created ISO image. Your computer will now "see" a virtual CD drive as if the physical disc were inserted. Bypass Authorization In some versions, you may need to navigate to an Authorization Files
folder and run a secondary setup within the same directory as the main software.
: If the software still prompts for a CD, ensure the virtual drive containing the CD1 ISO is active before launching Artcut. Configure Hardware Drivers Connect your plotter via USB. Install the USB Serial Driver (often found in a folder within your download). Check your Windows Device Manager to identify the assigned (e.g., COM3 or COM4). You must match this port in Artcut's File > Cut/Plot > Device Troubleshooting Tips Compatibility
: For Windows 10 or 11, try running the setup and the application in Compatibility Mode for Windows XP or Windows 7.
: Some older versions of Artcut 2009 only recognize the authorization if the system clock is manually set back to 2008 or 2009 during the initial launch. Run as Administrator : Always right-click the Artcut icon and select "Run as Administrator" Find the installer online – Search for ArtCut 2009 setup
to ensure it has the necessary permissions to access the virtual drive. specific compatible plotter models to confirm your hardware will work with this setup? How to download and install artcut 2009 on USB drive
Do not run the installer normally. Right-click Setup.exe → Properties → Compatibility tab:
Now double-click Setup.exe. The installation wizard will launch without asking for a CD.
setup.exe (it usually has the Artcut logo or a standard computer icon).setup.exe and select Properties.
setup.exe to start.Even with the best method, you may encounter issues. Here are the most common:
| Problem | Solution |
|---------|----------|
| "Component MSCOMCTL.OCX not found" | Download MSCOMCTL.OCX from a trusted source, place it in C:\Windows\SysWOW64, then run regsvr32 MSCOMCTL.OCX as admin. |
| Cutter not responding after USB install | Go to Device Manager → Ports (COM & LPT) → Right-click your USB Serial Port → Properties → Port Settings → Advanced → Change COM port number to COM1 or COM2 (Artcut sometimes only sees low numbers). |
| Software opens, but "No CD" error persists | Your antivirus may have deleted the crack. Disable real-time protection, re-apply the patch, and add the Artcut folder to exclusions. |
| Artcut crashes on Windows 11 | Run the cracked .exe in Windows 7 compatibility mode, and use Reduced color mode (16-bit). |