Spray Paint Msds ~repack~ — Asmaco
Asmaco Spray Paint, a product of Anchor Allied Factory Ltd, is a versatile acrylic-based aerosol used across automotive, industrial, and DIY sectors. Understanding its Material Safety Data Sheet (MSDS), now commonly referred to as a Safety Data Sheet (SDS), is critical for ensuring user safety and environmental compliance. Hazard Identification
According to its SDS, Asmaco spray paint is classified as an Extremely Flammable Aerosol (Category 1). Key hazards identified include:
Physical Hazards: Pressurised containers may burst if heated. Health Hazards:
Inhalation: Vapours may cause drowsiness, dizziness, and central nervous system depression. Asmaco Spray Paint Msds
Skin Contact: Repeated exposure may lead to skin dryness, cracking, or irritation. Eye Contact: Causes serious eye irritation.
Chronic Toxicity: Contains substances like Toluene, which are suspected of damaging the unborn child or impairing fertility. Chemical Composition
The spray paint contains a blend of solvents, resins, and propellants. Typical ingredients listed in the Asmaco Spray Paint MSDS include: material safety data sheet (msds) and its usage - NPC Asmaco Spray Paint, a product of Anchor Allied
Disclaimer: This guide is for informational purposes only. It summarizes typical data for solvent-based spray paints. Always refer to the specific label on the can and the official SDS provided by the manufacturer (Pioneer Industrial Corporation) for the exact product variant you are using.
4. First Aid Measures – What the MSDS Instructs
| Exposure Route | Immediate Action | |----------------|------------------| | Inhalation | Remove victim to fresh air. If breathing is difficult, administer oxygen. If stopped, give artificial respiration. Seek medical attention. | | Skin contact | Wash with soap and water for 15 minutes. Remove contaminated clothing. | | Eye contact | Rinse cautiously with water for at least 15–20 minutes, lifting eyelids. Call a poison center or doctor. | | Ingestion | Do NOT induce vomiting (risk of aspiration). Rinse mouth. Give water if conscious. Get immediate medical help. |
Note to supervisors: Post the MSDS first‑aid section next to paint storage areas. Note to supervisors: Post the MSDS first‑aid section
11. Toxicological Information
- Acute Toxicity: Low to moderate toxicity if swallowed. High toxicity if inhaled (due to solvents like Toluene/Xylene).
- Chronic Effects: Repeated overexposure to solvents can cause permanent brain and nervous system damage (Painter's Syndrome). May cause skin dryness and cracking.
- Carcinogenicity: Some spray paints may contain Crystalline Silica (risk applies mainly to sanding dried paint dust).
Section 9: Physical and Chemical Properties
These properties explain why the product behaves as it does.
| Property | Typical Value | |-----------|----------------| | Appearance | Colored, homogeneous liquid in aerosol can | | Odor | Sweet, solvent (aromatic hydrocarbons) | | pH | Not applicable (organic solvent) | | Boiling point (solvent) | 56°C (Acetone) to 140°C (Xylene) | | Flash point (aerosol) | < -15°C (extremely flammable) | | Auto-ignition temperature | > 200°C | | Vapor pressure | High (due to propellant) | | Relative density (liquid) | 0.8 – 0.9 g/cm³ (lighter than water) | | Solubility in water | Negligible | | VOC content | 400 – 650 g/L (typical solvent-based spray paint) |
Section 14: Transport Information
Asmaco spray paints are regulated as dangerous goods.
- UN Number: UN1950
- Proper Shipping Name: Aerosols, flammable
- Transport Hazard Class: 2.1 (Flammable gas)
- Packing Group: None (but special provisions apply)
- Labels required: Flammable gas + Limited quantity (if < 1L per can)
Air transport (IATA): Limited to 500 mL per can, with strict packaging rules.
Part 12: Ecological Information
- Toxicity to fish: LC50 (96h) for typical solvents = 10–100 mg/L – moderately toxic.
- Persistence: Solvents evaporate quickly but paint solids may persist in soil.
- Bioaccumulation: Low to moderate.
- Mobility in soil: Mobile (solvent fraction).
Do not dispose of Asmaco cans in household waste or into the environment.
Inhalation (Most Common):
- Move person to fresh air immediately.
- If breathing is irregular or has stopped, administer artificial respiration.
- Symptoms: headache, dizziness, nausea, loss of coordination.
- Danger: Do NOT give epinephrine or similar stimulants – may induce cardiac arrhythmia due to solvent sensitization.
