Seleccionar página

Autodata 345 The Hardware Information Does Not Match With Your Dongle Extra Quality 【TOP】

This error typically occurs with cracked or modified versions of Autodata 3.45 when the license registration file doesn't match your computer's Unique Identification (UID). Common Fixes

Verify Your UID: You must generate a license specific to your machine's hardware ID. Most installers include a tool called GetUid-x86.exe or GetUid-x64.exe. Run this as an administrator to find your 8 or 10-digit UID.

Regenerate the License: Use the included Keygen to create a new registry file (.reg). Crucial tip: If your UID starts with "64", usually you only enter the last 8 digits into the keygen.

Run as Administrator: Ensure you are running the Sentinel emulator or any installation scripts with administrative privileges to allow them to write to the system registry.

Check Windows Test Mode: This software often requires Windows to be in "Test Mode" to allow unsigned drivers (like the virtual dongle) to work. A watermark should appear in the lower-right corner of your desktop if this is active. Step-by-Step Installation Check

Run the Installer: Use Install_x64 or Install_x86 based on your OS.

Disable UAC: Turn off User Account Control and sign system files if prompted. Get UID: Run the UID tool and copy your hardware ID.

Generate & Merge: Use the keygen to create your license file, then double-click the resulting .reg file to add it to your registry.

Restart: Reboot your computer to ensure the emulator and registry changes take effect.

Are you using Windows 10 or 11, as these versions often require additional steps like using a Virtual Machine for the emulator to function?

Autodata Installation Guide for Windows | PDF | Computing - Scribd

The error "hardware information does not match with your dongle" in Autodata 3.45 (often referred to as the "extra quality" or patched version) indicates that the virtual dongle emulator installed on your computer does not match the Unique ID (UID) generated by your PC and imported into the license file

This usually happens because the emulator didn't install properly, the wrong registration file was used, or the computer's hardware configuration changed after installation. Common Causes & Fixes Virtual Emulator Failure:

The "AuDaS0 Virtual Device" may not be installed correctly, or the emulator failed to run. Ensure you have run the Emulator_x64 Emulator_x86 installer as an Administrator. Wrong UID Used: You likely generated a hardware ID ( ) and were sent a file based on that ID. If you re-ran the

tool again, the ID changed, making your license file invalid. You must use the first UID code you sent for the license creation. Regional Settings:

If Autodata opens but gives errors immediately, your regional settings might be incorrect. Change your Windows Region Settings to English (US) Antivirus Interference: This error typically occurs with cracked or modified

Antivirus software often deletes the emulator files because it detects them as a threat. Disable your antivirus before installing and emulator steps. Steps to Resolve the Mismatch (General Guide) Check Device Manager: Open Device Manager and check for SafeNet Sentinel Hardware Key

under System Devices. If it is missing or has a yellow warning, the emulator driver is not installed. Re-run the Emulator: Navigate to the

folder in the installation files and run the emulator file for your 32 or 64-bit system again, ensuring you select "Run as Administrator". Import the License File Again: Re-import the

file provided for your license activation to ensure the registration matches the current hardware ID. Restart PC:

Autodata requires a system reboot after modifying registry settings and emulator drivers.

Disclaimer: Autodata 3.45 is an older, often patched version. Proper installation often requires disabling driver signature enforcement and utilizing specialized emulator tools. Autodata 3.45 Installation Guide | PDF | 64 Bit Computing

Autodata 3.45 Error: The hardware information does not match with your dongle.

This error message typically appears when launching the Autodata 3.45 software package. It indicates a communication failure between the software and the security dongle (hardware key) required to validate the license.

Common Causes:

  • Driver Issues: The Sentinel or dongle drivers are not installed, are outdated, or are corrupted.
  • Port Conflicts: The USB port being used is not correctly recognizing the hardware signature of the dongle.
  • Software Installation: The version of the software installed does not correspond to the specific dongle connected.
  • Hardware Failure: The dongle itself may be damaged.

Troubleshooting Steps:

  1. Reinstall Drivers: reinstall the specific dongle drivers provided with the software (often Sentinel System Driver).
  2. Change USB Port: Move the dongle to a different USB port, preferably a direct port on the motherboard rather than a hub.
  3. Run as Administrator: Right-click the shortcut and select "Run as administrator" to ensure the software has permission to access hardware ports.

What I can help with instead (legitimate solutions)

If you have a genuine AutoData dongle and are seeing this error:

  1. Reinstall the correct driver for your dongle (Sentinel/HASP).
  2. Check Device Manager – ensure the dongle is detected.
  3. Verify your AutoData version matches the dongle’s license (e.g., AutoData 3.45 vs 3.46).
  4. Contact AutoData support – they can reset hardware binding if you replaced your PC.
  5. Use the official dongle update tool from AutoData’s website.

If you need help with legitimate automotive diagnostic software or troubleshooting genuine dongle errors, I’m glad to assist with that instead.

The error message "The hardware information does not match with your dongle" in Autodata 3.45 typically occurs when the unique hardware ID (UID) of your computer doesn't align with the licensed key generated during installation. This version of Autodata often relies on a "Sentinel" hardware key emulator, and if the registry entries or the emulator itself aren't correctly configured for your specific machine, the software will block access. Core Causes of the Mismatch

UID Generation Error: The most common cause is generating a license using an incorrect Hardware ID. On 64-bit systems, the ID-grabbing tool (GetUid-x64) must be run as an administrator and often requires a PC restart to display the true ID; otherwise, it may return a generic code like 6400000000, which will fail.

Registry Conflicts: If you previously had another version of Autodata or a different Sentinel-protected software installed, old registry entries can conflict with the new license. Driver Issues: The Sentinel or dongle drivers are

Emulator Inactivity: The "Sentinel Protection Installer" or the specific hardware key emulator might not be running in the background. Troubleshooting Steps Regenerate UID Correctly: Navigate to your Keygen folder.

Right-click GetUid-x64 (or x86 for 32-bit) and select Run as Administrator.

If you see a 10-digit code starting with "64", restart your PC and try again to ensure you get a unique machine ID. Generate a New License: Use the confirmed UID in your license generator (keygen).

Note: Some keygens require you to omit the first two digits (e.g., if your UID is 6485956hj, you only enter 85956hj). Clean and Re-import Registry:

Run any "Clean" or "Uninstall" scripts provided in your installation package to wipe old hardware info.

Double-click your newly generated .reg file to import the correct license data into your Windows Registry. Check Sentinel Drivers: Ensure the Sentinel Protection Installer is installed.

Verify the emulator status in Device Manager. You should see "Sentinel USB Software Dog" or similar under Universal Serial Bus controllers without a warning icon.

Disable Antivirus: Security software often flags emulators as "extra quality" or "crack" tools and may block the registry modification or the emulator execution. Autodata 3.45 Installation Guide | PDF - Scribd

The error "The hardware information does not match with your dongle" in Autodata 3.45 typically occurs due to a mismatch between the hardware ID (UID) of your computer and the license file generated during installation. This is common on Windows 7, 8, and 10 systems where the emulator or registry settings were not correctly applied. Step-by-Step Fix

To resolve this hardware mismatch, you must re-generate the license specifically for your current PC hardware: Generate a New UID:

Run the "GetUID" or "Hardware ID" utility (often found in the installation folder) as Administrator.

This will provide a unique 8-digit (32-bit) or 10-digit (64-bit) code for your machine. Create a New License:

Use the keygen/license generator tool included with your software package.

Enter the newly generated UID to create a custom .reg file for your computer. Apply Registry Settings:

Double-click the new .reg file to import the correct hardware information into your Windows Registry. Check the Sentinel Emulator: Troubleshooting Steps:

Open Device Manager and verify that "SafeNet Sentinel Hardware Key" and "AuDaS0 Virtual Device" are present without exclamation marks.

If they are missing, run the "Start Emulator" executable as Administrator. Adjust Regional Settings:

If the error persists, change your Windows Regional Format to English (United States). This is a known requirement for the 3.45 version to read the hardware key correctly. Key Installation Tips

Run as Administrator: Crucial for all steps involving driver installation or registry changes.

Disable Antivirus/UAC: Temporary disable these during installation as they often block the emulator drivers or flag the license generator as a "false positive".

Test Mode: Ensure "Test Mode" is visible in the bottom right corner of your desktop (required for the virtual dongle to work on Windows 7 and above).

For more detailed walkthroughs, you can refer to the Autodata 3.45 Installation Guide on Scribd or community discussions on the Carmasters Forum.

It looks like you’re asking for a review of the error message:

"autodata 345 the hardware information does not match with your dongle extra quality"

Here’s a breakdown of what this typically means and a review of the issue:

When to Contact Official Support

If you’ve tried the above steps, gather:

  • The dongle serial number (printed on the device or shown in Sentinel Admin Control Center).
  • A screenshot of the “hardware information does not match” error.
  • Details of any hardware changes made since the software last worked.

Then email AutoData (or your regional reseller). They can remotely unlock the dongle or issue a new hardware license file. This is the only reliable, safe method.

2. Technical Root Causes

Autodata 3.45 utilizes a sophisticated licensing mechanism. The error is triggered when the following checks fail:

5. Disable Conflicting Security Software

Some antivirus or endpoint protection programs block the dongle driver’s low-level access to hardware IDs. Temporarily disable such software, then test.