Avermedia Gl310 Driver «90% Fast»

AverMedia GL310 (Live Gamer Portable Lite): The Complete Driver & Software Guide

3. How to Find the Correct Download

AVerMedia reorganized their support site significantly in recent years. The GL310 is an older model, so it is often hidden.

1. Go to the AVerMedia Support Center.
2. Search specifically for "GL310" or "Live Gamer Portable".
3. Crucial Note: AVerMedia often consolidates their drivers. You might find the driver listed under "AVerMedia Live Gamer Portable (C875)"—the GL310 is the "Lite" version of the C875, and they often share the same software package (AVerMedia RECentral).

3. Setting up the Hardware (PC Mode vs. PC-Free Mode)

The GL310 has a switch on the front. The "driver" behaves differently depending on this switch.

Mode A: PC Mode (For Streaming/Recording to Computer)

• Switch Position: Set to PC.
• Cables: Connect the USB cable to your PC.
• Driver Status: The PC recognizes the device as a video capture device.
• OBS Studio Setup: If you use OBS instead of RECentral:
  1. Add Source -> Video Capture Device.
  2. Select AVerMedia LGP2 Plus.
  3. Scroll down to Video Settings: Set Resolution/FPS Type to "Custom" and usually select 1920x1080 (or 1080p60).

Mode B: PC-Free Mode (Recording to SD Card)

• Switch Position: Set to PC-Free.
• Cables: No USB connection to PC required.
• Driver Status: The device runs on internal firmware.
• Note: If your recordings are glitchy, you don't need a driver; you need to format your SD card to exFAT or NTFS on your computer first.

Q5: Why does my driver keep disappearing after a Windows Update?

A: Major Windows updates (e.g., 22H2 to 23H2) can overwrite or disable unsigned drivers. After a feature update, simply re-run the GL310 driver installer. There’s no need to uninstall first.

For Windows 10/11:

1. Uninstall old versions: Go to Control Panel > Uninstall any previous "AverMedia" or "RECentral" software.
2. Run the driver installer: Right-click Driver_GL310.exe > Run as Administrator.
3. Restart your PC (Critical step).
4. Now plug in the GL310 via USB.
5. Wait for "Device setup complete" popup.
6. Install RECentral 4.

9. Final Verdict: Is it worth updating?

The AverMedia GL310 is End of Life (EOL) . AverMedia no longer releases feature updates.

• Update your driver only if: You get "No Signal" or audio glitches.
• Do not update if: Your system is stable. Newer drivers often remove the "PC-Free mode" toggle in favor of forcing RECentral.

Pro Tip: Save the installation .exe file to a cloud drive. The GL310 driver was removed from the main AverMedia search in mid-2024. You may need to use the "Legacy" filter on their support page to find it now.

Need immediate help? Visit the r/AverMedia subreddit or AverMedia technical support chat (M-F 9 AM-6 PM GMT+8).

AVerMedia LGP Lite (GL310) is a legacy capture card that requires specific drivers to function correctly on modern operating systems like Windows 10 and 11. While it is officially discontinued, you can still get it running by following the steps below. 1. Download Official Drivers & Software

The most reliable way to get the GL310 working is to use the official legacy software from AVerMedia Support

Download the Windows 10 (64-bit) driver (v3.2802.64.40 or latest available). RECentral: RECentral 1 avermedia gl310 driver

(v1.3.0.117), as newer versions like RECentral 4 may not recognize this specific hardware. Stream Engine: If you plan to use third-party software like OBS Studio , you must also install the LGP Lite Stream Engine

. This allows the card to appear as a "Video Capture Device" in other programs. 2. Troubleshooting Windows 11 Incompatibility

Many users encounter an "Error Code 52" or a "No Device Detected" message on Windows 11 because the drivers are not digitally signed for the latest security standards. Disable Memory Integrity: Windows Security > Device Security > Core Isolation and toggle "Memory Integrity" to . The GL310 driver is often blocked by this feature. Driver Signature Enforcement: If the driver still won't install, you may need to restart Windows in Advanced Startup mode and select "Disable Driver Signature Enforcement". Assist Central: Alternatively, try AVerMedia Assist Central

, an automated tool that scans for connected devices and installs the appropriate legacy drivers. 3. Quick Setup Guide

To set up the AVerMedia Live Gamer Portable Lite (GL310), you need the specific Windows 10 drivers and compatible software to ensure it is recognized by your PC and applications like OBS Studio. 1. Official Driver & Software Download

AVerMedia has largely delisted the GL310 from its main support pages, but software remains available through their legacy support sections or unified tools.

Download Tool: Use AVerMedia Assist Central to automatically detect and install the correct driver for your hardware.

Manual Driver: The last official driver version is typically v3.2802.64.40 (released June 2020).

RECentral Software: Install RECentral v1.3.0.117 for basic recording and configuration.

Stream Engine: If using third-party software like OBS, install the LGP Lite Stream Engine to enable the card as a video source. 2. Installation Steps AverMedia GL310 (Live Gamer Portable Lite): The Complete

AVerMedia GL310 Go to product viewer dialog for this item. , also known as the Live Gamer Portable (LGP) Lite

, remains a popular entry-level capture card for gamers looking to record or stream 1080p content. However, because it is an older device, finding and installing the correct AVerMedia GL310

driver is essential for stability on modern operating systems like Windows 10 and 11. Essential Driver & Software Downloads To get your

running, you typically need two main components from the AVerMedia Support Page:

Device Driver: The latest official version is v3.2802.64.40 (released June 2020), which provides the necessary interface for Windows to recognise the hardware. RECentral Software:

This is AVerMedia’s proprietary application for recording and streaming. For the

, version 1.3.0.120 or higher is recommended to fix issues like the 2019 YouTube API change. Stream Engine: This plugin allows the

to work with third-party software like OBS Studio or XSplit on Windows. Windows 11 Compatibility & Installation

was designed for earlier versions of Windows, it can still function on Windows 11 with a few adjustments:

Download the Win10 Driver: Use the Windows 10 (64-bit) driver installer, as there is no dedicated Windows 11 executable. Go to the AVerMedia Support Center

Memory Integrity Check: Some users report that Windows 11's "Memory Integrity" security feature may flag the older driver as incompatible. You may need to temporarily disable this in Windows Security > Device Security > Core Isolation to complete the installation.

Manual Updates: If the card isn't detected, you can manually update it via the Device Manager by right-clicking the "

USB HD Capture" entry and pointing it to the extracted driver files. macOS Support Limitations Mac users should note that the has significant compatibility hurdles: OS Version Cap: The

officially supports macOS up to version 10.13 (High Sierra). It generally does not support macOS 10.14 (Mojave) or above due to changes in how Apple handles kernel extensions.

Feature Gaps: On supported Mac versions, the RECentral for Mac software only allows for video recording; it does not support live streaming.

Download and install AVerMedia TECHNOLOGIES, Inc. ... - DriverMax

Q1: Do I need the driver if I only use PC-Free mode (standalone SD card recording)?

Technically, no. The GL310 can record to an SD card without a PC driver. However, you need the driver to update the firmware (which fixes SD card compatibility issues with Class 10 and UHS-1 cards). Also, if the SD card fails, you’ll need the PC driver to use the device in PC mode as a backup.

Common Driver Issues & Fixes

| Issue | Likely Fix | | :--- | :--- | | Code 10 (Device cannot start) | Disable USB Selective Suspend in Power Options. | | No video in OBS / XSplit | Install AverMedia Central first. OBS uses the DirectShow filter installed by that suite. | | Driver works, then disappears after reboot | Windows Update overwrote the driver. Use Group Policy to prevent automatic driver updates for device ID USB\VID_07F8&PID_0312. | | No audio in recording | In Windows Sound Settings, set “AVerMedia GL310 Audio” as the Default Communications Device (not Default Device). |

2. The "Right" Driver: RECentral 4

The GL310 does not use a standalone "driver" file that you download separately. Instead, the drivers are packaged inside the RECentral software suite.

Do not use the old "RECentral 3" or "RECentral 2" installers. They are outdated and often cause the "No Signal" bug on Windows 10/11.

How to install correctly:

1. Go to the AVerMedia Support page (or search "AVerMedia GL310 Support").
2. Navigate to the Download tab.
3. Download RECentral 4 (this is the current standard).
4. Run the installer. Important: If Windows asks for permission to install device software during the process, click Install/Yes. This is the actual driver being loaded.
5. Restart your PC after installation.