Caraflo V200 Shower Instructions May 2026

The Caraflo V200 is a thermostatic mixer valve commonly used in static caravans and holiday homes from manufacturers like Swift, Willerby, and ABI. It is designed for either horizontal or vertical installation and features a 45mm pipe center.  Operating Instructions  The

operates with dual-control functionality to ensure a consistent and safe showering experience: 

Temperature Control: Rotate the thermostatic handle to set your preferred water temperature. It is factory-set with a safety limit to provide anti-scald protection, typically between 35∘C35 raised to the composed with power C and 40∘C40 raised to the composed with power C .

Flow Control: Use the second handle to turn the water on or off and adjust the flow volume.

Safety Cut-off: If either the hot or cold water supply fails, the valve is designed to stop or significantly reduce the flow to prevent accidental scalding or thermal shock.  Winterization & Maintenance 

Because these units are often in seasonal holiday homes, proper "draining down" is critical to prevent frozen water from cracking the internal thermostatic valve or pipework. 

Drain the System: Turn off the main water supply to the caravan. Open the valve and all other taps to let remaining water drain out . Disconnecting (Optional): The

is designed for easy disconnection if you prefer to store the valve in a frost-free location during winter.

Antifreeze: Apply a non-toxic, caravan-safe antifreeze into the valve to protect any residual moisture from freezing.

Cartridge Care: If the temperature becomes inconsistent, you may need to replace the thermostatic cartridge (92mm length, 31.45mm diameter) which is held in place by a screw-in thread.  Installation Specifications  Caraflo V200 Shower Mixer Tap Thermostatic Chrome

The Caraflo V200 is a thermostatic mixer shower valve widely used in static caravans and holiday homes, known for its dual-orientation design that fits both horizontal and vertical setups. It features standard 45mm pipe centres and is designed for easy replacement of older models like the V100. Operating Instructions

Operating the Caraflo V200 is straightforward, using two main controls to manage water flow and temperature:

Flow Control: Typically located on one side of the bar, rotate the handle towards you (anti-clockwise) to start the water flow and away from you (clockwise) to stop it.

Temperature Adjustment: The opposite handle controls the mix. It includes a safety stop button at approximately 38°C to prevent accidental scalding.

To increase the temperature beyond the safety stop, press the red set button and continue turning the handle.

The maximum mixed water temperature is preset for safety but can reach up to 46°C. Winterisation and Draining Down

Because these showers are often in seasonal holiday homes, proper draining is critical to prevent internal damage from freezing water.

Isolate Water: Turn off the main water supply to the caravan or holiday home.

Drain the Hose: Remove the shower hose from the mixer or lay the head in the tray to drain trapped water. Open Valves: Open the flow valve fully.

Turn the thermostat valve fully clockwise to drain the cold side.

Press the red button and turn the thermostat fully anti-clockwise to drain the hot side.

Optional Removal: The V200 is designed for easy disconnection. Many owners choose to remove the entire valve and store it in a frost-free environment during winter. Maintenance and Troubleshooting Caraflo V200 Shower Mixer Tap Thermostatic Chrome

The Caraflo V200 is a thermostatic shower mixer valve widely used in static caravans and holiday homes across the UK. Introduced in 2013 as a replacement for the V100 model, it is a standard fixture in brands like Swift, Willerby, and ABI. Core Features caraflo v200 shower instructions

Dual Orientation: This valve can be installed either horizontally or vertically, allowing for flexible placement in various shower pod designs.

Thermostatic Control: Maintains a consistent water temperature by automatically adjusting for fluctuations in the incoming water supply.

Direct Replacement: Features 45mm fixing centers, making it a drop-in replacement for older V100 models without needing modifications to the pipework.

Industry Certified: Fully compliant with NCC certification, WRAS approval, and TMV2 scheme standards for safety and performance.

Durable Build: Typically manufactured from solid brass with a polished chrome finish and a ceramic disc cartridge for longevity. Operating Instructions

Operating the V200 is straightforward, involving two primary controls usually located on the valve handles:

Flow Control: Turn the designated handle (often the right or bottom handle, depending on orientation) toward you to increase water flow and away from you to turn it off.

Temperature Control: Rotate the temperature handle (often the left or top handle) to adjust the warmth.

Safety Stop: The valve is typically factory-set to a maximum safety temperature of around 38°C. To increase the temperature beyond this limit, you must press the safety override button while turning the handle.

Watch this brief guide on how a thermostatic mixer works to maintain consistent temperatures:

Consider applying a non-toxic, caravan-safe antifreeze into the valve body to protect internal components. Cartridge Replacement: The Caraflo V200 is a thermostatic mixer valve

If the shower drips or fails to regulate temperature, the internal thermostatic cartridge

(92mm length, 31.45mm diameter) may need replacement or descaling. Use silicone grease

when reinstalling or servicing the cartridge to ensure smooth operation. The Caravan Warehouse Replacement Spare Parts Caraflo V200 Shower Mixer Tap Thermostatic Chrome

Activating the Vortex (The "Sweet Spot")

The V200 does not need maximum pressure to work—it needs velocity.

• Low pressure homes: Set your mixer to 70% hot, 30% cold. The thermo-dynamic vortex activates best when the flow rate is steady, not pulsing.
• High pressure homes (over 500kPa): You will feel a "whirring" sound. This is normal. To soften the spray, turn your main water valve down slightly. The V200 has a built-in regulator; exceeding 800kPa will damage the rotor.

Safety & specs (key points)

• Designed for high‑pressure systems; recommended flow pressure: 0.5–5 bar. Above 5 bar use a pressure reducer.
• Shower application mixed‑water max 41°C (TMV2 guidance).
• Do not allow water to freeze inside the valve—freeze damage is common if not drained.

If you need, I can extract specific operating illustrations or the official installation/drain‑down diagram from the V200 manual.

The Caraflo V200 is a thermostatic shower mixer valve widely used in static caravans and holiday homes, known for its ability to be easily disconnected and drained to prevent frost damage during winter. It is a direct replacement for the older V100 model and is compatible with various caravan brands like Swift, Willerby, and ABI. Operating Instructions & Safety

Temperature Control: The mixed water temperature can be adjusted from cold to a preset top limit (typically 35°C to 40°C).

Anti-Scald Protection: The valve includes full anti-scald protection, provided the hot water inlet temperature remains at least 10°C above the outlet temperature.

Safety Button: A button on the temperature handle prevents accidental setting to excessively high temperatures; it must be pressed to override this limit for hotter water. Water Requirements: Hot Supply: Recommended between 55°C and 65°C. Cold Supply: Should be less than 25°C. Operating Pressure: Designed for 0.5 to 5 bar.

Automatic Shut-off: If the hot or cold water supply is lost, the shower will stop or significantly reduce flow until both supplies are restored to prevent thermal shock. Maintenance and Winterization

Getting Ready for a Refreshing Shower

It was a long day, and Sarah was looking forward to unwinding with a warm shower. She had just moved into a new apartment and was excited to try out the Caraflo V200 shower system that came with it. As she approached the shower, she noticed the sleek and modern design of the V200. She had heard great things about Caraflo's water-saving technology, and she was eager to experience it for herself.

Step 1: Turning on the Water

Sarah started by turning on the water using the easy-to-use handle on the V200. She gave it a gentle pull, and the water began to flow. She was pleased to see that the water pressure was just right - not too strong, not too weak.

Step 2: Adjusting the Temperature

Next, Sarah adjusted the temperature to her liking. She turned the handle slightly to the left, and the water temperature increased to a comfortable warmth. She was impressed by how smoothly the temperature adjusted, without any sudden spikes or drops.

Step 3: Activating the Showerhead

Sarah then activated the showerhead by pressing the button on the handle. The V200's showerhead sprang to life, delivering a soothing spray of water that covered her entire body. She loved the wide coverage area of the showerhead, which made her feel like she was showering under a mini-massage.

Step 4: Enjoying the Shower Experience

As Sarah showered, she appreciated the V200's ability to maintain a consistent water temperature, even when she moved the showerhead around her body. She also enjoyed the massage setting, which provided a gentle yet invigorating stimulation to her muscles.

Step 5: Turning off the Water

When Sarah was ready to get out of the shower, she simply turned the handle back to the "off" position. The water stopped flowing immediately, and she was pleased to see that the V200 had automatically shut off, saving water and energy. Activating the Vortex (The "Sweet Spot") The V200

The Verdict

Sarah felt refreshed and rejuvenated after her shower with the Caraflo V200. She was impressed by the ease of use, comfortable water temperature, and luxurious shower experience. From now on, she looked forward to enjoying many more refreshing showers with her new V200.

Additional Tips and Reminders

• Regularly clean the showerhead to ensure optimal performance and water flow.
• Adjust the temperature and water pressure to your liking, but also be mindful of water conservation.
• Explore the various settings and features of the V200 to customize your shower experience.

By following these simple instructions and tips, you can enjoy a wonderful shower experience with your Caraflo V200. Happy showering!

The Caraflo V200 is a thermostatic shower mixer valve specifically designed for static caravans and holiday homes. Since its introduction in 2013, it has become a standard fitting in many holiday home brands, including Swift, Willerby, ABI, and Victory. Installation Instructions

The V200 is designed for versatility and can be mounted in either a horizontal or vertical orientation depending on your shower pod's layout.

Preparation: Before installation, ensure all supply pipework is thoroughly flushed to remove debris. Mounting:

The valve requires secure fixing and must be supported by a baton or noggin behind the wall.

It features 45mm fixing centers (the distance between the hot and cold water inlets). Connections:

Connect the HOT water supply to the inlet marked "H" or labeled with a red/orange sticker.

Connect the COLD water supply to the inlet marked "C" or labeled with a blue sticker.

Sealing: Insert the provided rubber seals into the union nuts before tightening them onto the brass tails.

Finishing: Tighten by hand first, then secure with a wrench. Attach your shower hose to the outlet at the bottom of the mixer. Operating & Winterizing Instructions

The V200 uses thermostatic control to maintain consistent water temperature, protecting users from sudden shocks if other taps are used in the caravan. Caraflo V200 Shower Mixer Tap Thermostatic Chrome

You can use this text for a user manual, a how-to guide, or an FAQ section.

3. Diverter (Switch between outlets)

Usually a pull knob or lever below or between the dials.

• Position 1 (down/pushed in): Overhead rain shower
• Position 2 (up/pulled out): Hand shower
• Position 3 (middle, if available): Both outlets simultaneously

✅ Always turn flow OFF before switching diverter to prevent wear on internal seals.

2. Installation Summary (Professional Installation Recommended)

Wall preparation:

• Valve body must be installed horizontally with hot water supply on the left (viewed from front).
• Depth: finished wall surface should align with valve’s cover plate range (typically 25–35mm from tile face).

Plumbing connections:

• Inlets: ½” BSP threaded, 150mm center-to-center (standard UK spacing).
• Outlets: top port for overhead shower, bottom port for hand shower (if diverter version).

Flushing:

• Always flush pipes before connecting cartridge to remove debris.

Mastering Your Shower Experience: The Complete Caraflo V200 Shower Instructions Guide

When it comes to achieving a perfect balance between water efficiency and high-pressure performance, the Caraflo V200 Shower system stands out as a market leader. Known for its sleek Australian design and patented vortex technology, the V200 promises a rain-like experience while saving water. However, to unlock its full potential—or to troubleshoot when things go wrong—you need the right guidance.

Whether you have just unboxed the unit, are dealing with a sudden drop in pressure, or need to clean a clogged nozzle, these Caraflo V200 shower instructions will walk you through installation, usage, maintenance, and troubleshooting.

7. Important Safety & Compatibility Notes

• ✅ Max hot water supply temperature: 70°C (ideally 55–65°C).
• ❌ Not compatible with instantaneous gas water heaters that have wide temperature swings.
• ✅ Works with combi boilers, unvented cylinders, gravity systems (with pump if pressure <0.5 bar).
• ⚠️ If children or elderly use the shower, keep safety stop at 38°C.

1. Safety Precautions

Before using the unit, ensure the following safety measures are observed to prevent injury or damage to the unit:

• Temperature Limits: The system is designed to mix hot and cold water. Do not set your water heater to a temperature exceeding 60°C (140°F), as this can damage the unit's internal thermostatic cartridge and pose a scalding risk.
• Water Pressure: Ensure your water pressure is within the operating range (typically 0.1 MPa to 0.5 MPa). If pressure is too low, the digital display or diversion valves may not function correctly.
• Electrical Safety: If your V200 model requires battery power or an AC adapter for the digital display, ensure all connections remain dry and away from direct water spray.

Commissioning checklist (installer)

• Mains isolator present and labeled.
• RCD protecting circuit tested.
• Correct cable sizing and secure terminations.
• Water inlet pressure meets manufacturer spec (typically low to medium pressure electric showers require minimum pressure; confirm from product label).
• No leaks; adequate flow from handset.
• Temperature control operates smoothly across range.
• User instructed on basic operation and isolator location.