It looks like you're offline.
Donate
English (en) Change Website Language

Cipherlab 308 Usb-to-rs232 Interface Converter Driver //free\\

CipherLab 308 USB-to-RS232 interface converter requires the Silicon Labs CP210x USB to UART Bridge VCP Driver

to function. Once installed, your computer will recognize the device as a virtual COM port, allowing serial communication with barcode scanners or mobile computers. 🛠️ Installation Steps Download Driver: Visit the Silicon Labs VCP Driver page to download the " CP210x VCP Windows " driver kit.

Unzip & Run: Extract the folder and run CP210xVCPInstaller_x64.exe (for 64-bit Windows). Connect Hardware: Plug the CipherLab 308 into your USB port after installation is complete.

Verify COM Port: Open Device Manager and check under Ports (COM & LPT) to find the assigned port number (e.g., COM3). Key Specifications Chipset: Silicon Labs CP210x

Compatibility: Works with CipherLab 150x, 156x, 166x, 8xxx, and 25xx series. OS Support: Windows (XP to 11), Linux, and Mac OS.

Features: Provides power directly to scanners via USB; includes LED transmission indicators. Troubleshooting

Device Not Found: Ensure the "VCOM" mode is enabled on your scanner by scanning the appropriate configuration barcode.

Multiple Drivers: If the standard driver fails, check DriverIdentifier for specific OEM versions linked to your hardware.

Port Reset: If the port is not appearing, restart your computer to apply the Virtual COM settings.

For official technical documents and utilities like ScanMaster or ProgLoad, visit the CipherLab Support Portal.

CipherLab 308 is a specialized USB-to-RS232 interface converter designed primarily to connect older CipherLab barcode scanners and mobile computers—such as the CPT-800x or 83xx series—to modern computers via a Virtual COM Port (VCP) TSD-Expert.ru Core Functionality

The converter acts as a bridge, translating USB signals into RS232 serial signals. This allows legacy hardware and applications that strictly require a COM port to function over a standard USB interface. Driver Specifications & Details The "308" converter is built around the Silicon Labs CP210x Device ID: Typically identified by the hardware ID USB\VID_10C4&PID_EA60 Operating System Support: Standard drivers are available for Windows (XP through Windows 10)

, and the underlying Silicon Labs architecture also supports Linux and Mac OS. Virtual COM Port:

Upon successful installation, the system assigns a specific COM port number (e.g., COM3) to the device, which can be verified in the Windows Device Manager under "Ports (COM & LPT)". Installation & Troubleshooting

Proper installation is critical for the device to be recognized correctly by your system. Pre-Installation: It is highly recommended to run the driver setup file physically connecting the USB converter to the computer. Recognition:

Once connected, the hardware should be recognized as "CIPHERLAB 308 USB-to-RS-232 Interface Converter" and "CP210x USB Composite Device". Common Issues: Unknown Device:

If the scanner shows as an "unknown device," you may need to uninstall existing drivers and reinstall the latest Silicon Labs VCOM driver before plugging it back in. Blue Screen Errors: cipherlab 308 usb-to-rs232 interface converter driver

If a blue screen occurs upon connection, testing the device on another computer or updating to a more recent driver version is advised. Official Resources

The CipherLab 308 USB-to-RS232 Interface Converter allows you to connect legacy serial devices, like barcode scanners or mobile computers, to modern computers via a USB port. It functions as a Virtual COM Port, meaning your computer will treat the USB connection as if it were a physical RS-232 serial port. 🛠️ Driver Details

The device typically uses the Silicon Labs CP210x USB to UART Bridge chipset.

Supported OS: Windows (XP through Windows 11), Linux, and Mac OS. Hardware ID: Often identified as USB\VID_10C4&PID_EA60.

Virtual COM: Once installed, it appears in your Device Manager under "Ports (COM & LPT)". 📥 Where to Download

You can obtain the necessary drivers from several authoritative sources:

Official Support: Download directly from the CipherLab Download Center under the "Utilities" or "Drivers" section.

Chipset Provider: Since the 308 often uses Silicon Labs technology, standard CP210x VCP Drivers are frequently compatible.

Hardware Specifics: Drivers for specific workstation configurations (like HP or Dell) can be found via specialized repositories like DriverIdentifier . 🚀 Installation Tips

Disconnect First: Run the driver installer before plugging in the converter to ensure proper recognition. Verify in Device Manager : Look for " CIPHERLAB 308 USB-to-RS-232 Interface Converter

" or "CP210x USB Composite Device" to find your assigned COM port number.

Power: The converter provides power to the scanner through the USB port, so an external power supply is usually unnecessary. 308 USB Virtual COM

CipherLab 308 USB-to-RS232 Interface Converter is a vital bridge for connecting legacy serial-based barcode scanners to modern computers that lack dedicated COM ports.

Below is a drafted blog post to guide users through the installation and troubleshooting process.

Bridging the Gap: A Guide to the CipherLab 308 USB-to-RS232 Driver

In the world of inventory and retail, reliable data transmission is everything. However, as hardware evolves, connecting legacy serial-based barcode scanners to modern USB-only laptops can be a headache. The CipherLab 308 USB-to-RS232 Interface Converter Plug in the CipherLab 308 cable (barcode scanner

is the go-to solution, acting as a "Virtual COM Port" (VCOM) to ensure your equipment keeps communicating flawlessly. Key Features of the CipherLab 308 Plug-and-Play Power

: Provides power directly to the scanner through the USB port, eliminating the need for bulky external power supplies. Broad Compatibility

: Designed specifically for CipherLab’s 1500, 1560, 1660, and 8000 series, but also compatible with other RS232-enabled scanners. Virtual COM Mapping

: Automatically assigns a COM port number in Windows, allowing your software to "see" the scanner as if it were plugged into a traditional serial port. Step-by-Step Installation Guide

To get started, you'll need the correct drivers, often based on the Silicon Labs CP210x chipset found inside the 308 converter. 1. Download and Prepare : Obtain the latest driver package from the CipherLab Support Portal or the official Silicon Labs website if you need the base VCP drivers.

: Unzip the folder to a location you can easily find, such as your desktop. 2. Run the Pre-Installer CP210xVCPInstaller.exe

plugging in the device. Follow the on-screen prompts to completion. 3. Hardware Connection 308 Converter into an available USB port.

Connect your barcode scanner to the RS232 end of the converter. Windows should now display a notification that the " CipherLab 308 USB-to-RS-232 Interface Converter " is ready 4. Verify the COM Port Device Manager (right-click the Start button and select it). Expand the Ports (COM & LPT) Look for the entry labeled CipherLab 308 Silicon Labs CP210x USB to UART Bridge . Note the number next to it (e.g., ). Use this number in your scanning software settings. Troubleshooting Tips Cipherlab 308 Usb To Rs232 Interface Converterrar

The CipherLab 308 USB-to-RS232 Interface Converter is a specialized communication cable used to connect CipherLab barcode scanners and mobile computers (such as the 8000, 8200, 8400, and 8700 series) to a PC. It functions as a Virtual COM (VCOM) bridge, allowing the computer to communicate with serial devices via a USB port. Technical Overview

The "308" designation refers to the specific controller housed within the cable that translates RS232 serial signals to USB.

Chipset: The hardware typically utilizes a Silicon Labs CP210x USB-to-UART bridge.

Functionality: Unlike standard charging cables, the 308 cable is primarily for data transfer and may not support device charging.

Virtual COM Port: Once installed, the driver assigns a specific COM port number to the device, which can be viewed in the Windows Device Manager under "Ports (COM & LPT)". Driver Installation Guide

To ensure proper communication, the driver should ideally be installed before connecting the cable to the computer.

Download: Drivers are available on the CipherLab Download Center under "Utilities" or "Drivers".

Extraction: Unzip the downloaded file (often a .zip or .rar package). Press Win + X → Device Manager Look

Execution: Run the setup.exe or pre-installer file. Follow the on-screen prompts and click "Finish" when complete.

Connection: Plug the 308 USB converter into an available USB port. Windows should recognize it as "CIPHERLAB 308 USB-to-RS-232 Interface Converter".

Configuration: Some scanners require a specific barcode to be scanned to switch the interface to VCOM mode. Troubleshooting Common Issues

Unknown Device Error: If the device is not recognized, uninstall any existing driver versions, restart, and reinstall the latest driver before plugging the device back in.

Conflict with OS: Older versions of the driver may cause system instability (e.g., Blue Screen of Death) on modern operating systems like Windows 10 or 11; ensure you are using the latest version from the official CipherLab support portal.

COM Port Identification: If your software cannot find the scanner, check Device Manager to confirm which COM port number (e.g., COM3, COM4) was assigned to the "Silicon Labs CP210x" bridge. If youg., Windows 11).

Provide the setup barcodes needed to put your scanner into VCOM mode.

Explain how to manually assign a COM port number if your software requires a specific one. Let me know which CipherLab device model you are using! Download - CipherLab

The CipherLab 308 is a specific model of a USB-to-RS-232 (serial) interface converter often used with CipherLab barcode scanners and other legacy serial devices.

Here is the direct information you need regarding its driver and setup.

How to fix (no driver article, but a clear procedure)

  1. Plug in the CipherLab 308 cable (barcode scanner not needed yet).
  2. Open Device Manager (Windows):
    • Press Win + X → Device Manager
    • Look under Ports (COM & LPT).
    • If you see “USB Serial Port (COMx)” → driver is already working.
    • If you see “Unknown device” or “Prolific USB-to-Serial” with error code 10 → driver needed.
  3. Identify the chip:
    • Right-click the unknown device → Properties → Details → Hardware Ids.
    • Look for VID_067B (Prolific), VID_10C4 (Silicon Labs), or VID_0403 (FTDI).
  4. Download the correct driver (not from random “driver download” sites):
    • Prolific: Go to prolific.com → Support → PL-2303 Driver (use older driver if on Windows 10/11 for legacy chips).
    • Silicon Labs: silabs.com → CP210x Universal Windows Driver.
    • FTDI: ftdichip.com → Virtual COM Port Drivers.
  5. After installing the correct chip driver, the CipherLab 308 will appear as a standard COM port.

Option 3: Silicon Labs (Less common for CipherLab 308)

If your device has a CP210x marking:

  1. Go to Silicon Labs' website.
  2. Search for "CP210x USB to UART Bridge VCP Drivers."

Warning: Avoid "driver download" aggregator sites. They often bundle adware.

Introduction

In the world of industrial data capture and barcode scanning, compatibility is king. Legacy systems, particularly those relying on RS232 serial communication (often called COM ports), are still the backbone of many warehouses, manufacturing floors, and point-of-sale (POS) systems. However, modern computers have largely abandoned the 9-pin serial port in favor of USB.

Enter the CipherLab 308 USB-to-RS232 Interface Converter. This small yet powerful device bridges the gap between old and new, allowing CipherLab barcode scanners (like the 1100, 1500, 1504, and 1560 series) to communicate with a modern PC via USB. But the hardware is only half the story. The true key to functionality lies in the software: the CipherLab 308 USB-to-RS232 Interface Converter driver.

Without the correct driver, your operating system will not recognize the converter, rendering your barcode scanner useless. This article provides an exhaustive deep dive into the driver, covering what it is, where to find it, how to install it, and how to solve common issues.