Dap-1360 Firmware 6.10 _hot_ Download Site

D-Link DAP‑1360 Rev. A/B – Firmware 6.10: What You Need to Know

The DAP‑1360 is a versatile wireless range extender / access point from D‑Link, released in several hardware revisions (A, B, C, etc.). Firmware 6.10 was a notable release for Rev. A and B units, typically rolled out around 2012–2014.

3. Universal Repeater Mode Fixes

Older firmware had trouble maintaining a persistent connection with Asus and Netgear routers. Version 6.10 introduces better cross-vendor compatibility for WDS and Universal Repeater modes. Dap-1360 Firmware 6.10 Download

Scaricare il firmware 6.10

  • Vai alla pagina di supporto ufficiale D-Link per il modello DAP-1360 e scarica il file firmware corrispondente alla versione 6.10.
    • Nota: scarica solo da fonti ufficiali D-Link per evitare firmware contraffatti o dannosi.
  • Controlla il nome del file e la documentazione di rilascio (release notes) per verificare compatibilità hardware/versione.

Final Checklist Before Downloading

  • [ ] I have checked the hardware revision sticker (A, B, D, or E).
  • [ ] I have downloaded DAP1360_REVX_FW_6.10.bin from D-Link’s official site.
  • [ ] I have an Ethernet cable ready.
  • [ ] I have backed up my current configuration (Maintenance > Save Settings).
  • [ ] My power supply is stable (no storms expected).

2. Optimize Wireless Settings for 6.10

Firmware 6.10 introduces better channel management. D-Link DAP‑1360 Rev

  • 2.4 GHz Channel: Set to 1, 6, or 11 only (Avoid Auto).
  • Channel Width: 20 MHz (40 MHz causes interference with neighbors).
  • Security: WPA2-PSK with AES (Do NOT use TKIP).
  • Hidden SSID: No (Hidden SSID increases probe requests and reduces battery life).

Option 3: D-Link FTP Archive (Legacy)

D-Link maintains an FTP server for legacy devices: ftp://ftp.dlink.com/Products/DAP/DAP1360/ Vai alla pagina di supporto ufficiale D-Link per

Navigate to the Firmware folder, then your revision, then download v6.10.

Dopo l’aggiornamento

  • Verifica la versione firmware nell’interfaccia per confermare 6.10.
  • Ripristina la configurazione esportata se necessario, oppure riconfigura manualmente per sicurezza.
  • Controlla funzionalità principali (connessione wireless, bridging, access point mode, eventuali VLAN/port forwarding).

3. Enable "No Ack" (For Repeater Mode)

If you are using Universal Repeater mode (Wi-Fi bridging), go to Advanced > Performance and enable No Acknowledgement. This reduces latency by 15ms in 6.10.