Dvt-dbeaver-keymaker

Dvt-dbeaver-keymaker
Top  Previous  Next

Dvt-dbeaver-keymaker

Dvt-dbeaver-keymaker

How to create a new label design for Automation using Avery Design Pro 5.0

Follow the steps below to create a new label to be used with Automation Suite using Avery Design Pro 5.0.

Before you begin, make a new folder anywhere on your hard drive and name it anything you like.  (e.g Template) (I put my new folder on the desktop)

Using your windows explorer, go to C:\Router-CIM\Automation\Bin and copy the file called Label.dbf into the folder that you just created.

While your there, make a copy of the original RouterCIM.zpd file that is in that folder also.

Open Avery Design Pro.

clip0011

At the Start Screen for Avery Design Pro, click ‘Design from Scratch’.

clip0012

At the Select Template screen, choose the label you would like to use and click ‘OK’.
For this tutorial, I will be using the 8464 shipping labels.
 
KEEP IN MIND THAT THE SIZE OF THE LABEL DICTATES HOW MUCH INFORMATION YOU CAN USE ON THAT LABEL.

clip0013

This screen shows actual label that you chose in the previous step.

clip0014

From the Database pull down menu, choose Open…

clip0015

clip0016

Click on the 'Open Database' icon.

At this screen, go to the folder that you created at the very beginning that has the label.dbf

clip0017

After opening the Template folder (or whatever you called it), select the label.dbf and click ‘Open’.

clip0018

 

At the next screen, select ‘Insert Fields’.

clip0019

This will open the Insert Fields box.

clip0020

The next few images will show Field descriptions.

 

Router-CIM Label file map

 

 

 

 

FIELD #

HEADER LABEL description

 

Field1:

Job name

* JOB: labels *,

Field2:

 

not used,

Field3:

 

not used,

Field4:

 

not used,

Field5:

Router-CIM Version information

* ROUTER-CIM LABELING *,

Field6:

 

not used,

Field7:

Router-CIM Version information

* for Router-CIM 2010 *,

Field8:

 

not used,

Field9:

 

not used,

Field 10:

 

not used,

Field 11:

 

not used,

Field 12:

 

not used,

Field 13:

Points to a blank file so nothing appears on label

C:\Router-CIM\automation\blank.wmf,

Field 14:

 

not used,

Field 15:

 

 

Field 16:

 

 

Field 17:

 

 

Field 18:

 

 

Field 19:

 

 

Field 20:

 

 

Field 21:

 

 

Dvt-dbeaver-keymaker

dvt-dbeaver-keymaker is not an official feature of DBeaver. It refers to a third-party, unofficial "keygen" or "crack" tool created by a group known as DVT (Digital Volcanic Team). Key Context

Purpose: This tool is designed to bypass licensing for paid versions of DBeaver, such as the Enterprise or Ultimate editions.

Security Risks: Files associated with this name (e.g., dvt-DBeaver-KeyMaker.jar) are often flagged by security scanners as suspicious or potentially malicious.

Legitimate Alternative: DBeaver Community Edition is a completely free and open-source version that supports most popular SQL databases without requiring a license key.

For secure, official access to professional features like cloud integration or advanced data visualization, it is recommended to use the official DBeaver licensing. suspicious - Hybrid Analysis

Searching for "dvt-dbeaver-keymaker" typically relates to tools or scripts used to bypass licensing for DBeaver Ultimate or Enterprise Edition. These editions are commercial products that require a paid license to unlock features like cloud explorers and advanced security. ⚠️ Security and Legal Risks

Malware: Files labeled as "keymakers" or "cracks" often contain trojans or spyware that can compromise your database credentials and personal data. dvt-dbeaver-keymaker

Compliance: Using unauthorized license keys violates the DBeaver EULA, which can lead to legal issues for individuals or organizations.

Instability: These tools often break during software updates, leading to data loss or corrupted workspace configurations. ✅ Legitimate Alternatives

If you need powerful database management without the cost, consider these safer paths:

DBeaver Community Edition: A completely free, open-source version available at dbeaver.io. It includes support for MySQL, PostgreSQL, SQLite, and many others.

Free Trial: You can request a trial for the PRO editions directly from the Official DBeaver Website to test premium features legally.

Open Source Competitors: Tools like DbVisualizer or DBeaver Alternatives often have free tiers or community versions. Key DBeaver Features (Standard) dvt-dbeaver-keymaker is not an official feature of DBeaver

SQL Editor: Write and execute complex queries with auto-completion.

ER Diagrams: Automatically generate visual maps of your database schema. Data Export: Move data easily to CSV, XML, or JSON formats.

💡 Pro-Tip: If you have a legitimate key and are having trouble, follow the Official License Import Guide to activate your software.

If you tell me what specific features you're looking for (like Cloud storage access or Snowflake key-pair auth), I can help you find a free, legal way to set them up in the Community Edition. Welcome | DBeaver Documentation

Here’s a write-up for a hypothetical tool called dvt-dbeaver-keymaker.

Since the name suggests something related to DBeaver (a popular database tool) and “keymaker” (often implying license generation/cracking), I’ll frame this as an educational security research / reverse engineering analysis of a vulnerable licensing mechanism in an older version of DBeaver (or a DBeaver fork). Troubleshooting

Troubleshooting

  • Connection Issues: Ensure your database server is running, and your network connection is stable. Check the database server logs for connection errors.
  • SQL Errors: Verify your SQL syntax and the database object names you're querying.

Installation

  1. Download DBeaver: Go to the official DBeaver website and download the application suitable for your operating system (Windows, macOS, Linux).
  2. Install DBeaver: Follow the installation instructions for your OS. The process is straightforward and does not require any special configurations.

Background

In DBeaver versions prior to 21.0.0 (Community and older Enterprise editions), license validation was performed locally using a deterministic algorithm based on:

  • A hardcoded public key (RSA‑1024)
  • Username + email + license type encoded in a custom binary format

The validation lacked proper obfuscation, allowing an attacker to recover the private key from the binary using dynamic analysis and lattice attacks on the RSA parameters (small exponent, known plaintext).

Ethical & Legal Note

This tool is for educational and authorized security testing only.
Using it to circumvent licensing of DBeaver Enterprise or any commercial software is illegal and violates software licensing agreements.
Always purchase a valid license to support developers.

Overview

dvt-dbeaver-keymaker is a proof-of-concept key generator for DBeaver Universal Database Tool (legacy versions pre‑21.x with a weak custom license validation routine).
It was developed during a security assessment of offline license validation algorithms and is intended only for authorized security training and vulnerability research.

How dvt-dbeaver-keymaker Works

  1. Reverse Engineering
    The DBeaver license validator was located in com/dbeaver/license/LicenseValidator.class.
    Using JD‑GUI and Bytecode Viewer, we identified the RSA modulus n and exponent e = 3.

  2. Private Key Recovery
    Because e = 3 and the license structure had a predictable padding format, the Håstad’s broadcast attack variant allowed recovery of the private exponent d by analyzing 3 different valid licenses.

  3. License Generation
    The tool takes a username, email, and desired edition (Ultimate/Enterprise) and generates a valid license file.
    It constructs the license payload → pads it → signs it using the recovered private key → encodes as Base64.

$ ./dvt-dbeaver-keymaker --name "John Doe" --email "john@example.com" --edition enterprise
[+] License generated: dbeaver.license
[+] SHA-256: a3f5c1...
  1. Bypass Mechanism
    After generating the license, the user places it in ~/.dbeaver/ (Linux) or %APPDATA%\DBeaver\ (Windows) and restarts DBeaver. The Enterprise features are unlocked.

 

 

 

FIELD #

SCRAP LABEL description

SCRAP LABEL sample data

Field1:

Label Title

**** SCRAP INVENTORY ****,

Field2:

X size of scrap

XDIM: 19.8223,

Field3:

Y size of scrap

YDIM: 48.0000,

Field4:

Scrap qty

SCRAP QTY: 1,

Field5:

Material type

MATERIAL TYPE# 3/4 MDF,

Field6:

 

not used ,

Field7:

 

not used ,

Field8:

 

not used ,

Field9:

 

not used ,

Field 10:

 

not used ,

Field 11:

 

not used ,

Field 12:

 

not used ,

Field 13:

Points to a blank file so nothing appears on label

C:\Router-CIM\Automation\blank.wmf,

Field 14:

 

not used ,

Field 15:

 

not used

Field 16:

 

 

Field 17:

 

 

Field 18:

 

 

Field 19:

 

 

Field 20:

 

 

Field 21:

 

 

 

 

 

FIELD #

BARCODE LABEL description

 

Field1:

 

not used,

Field2:

 

not used,

Field3:

 

not used,

Field4:

 

not used,

Field5:

 

not used,

Field6:

 

not used,

Field7:

 

not used,

Field8:

 

not used,

Field9:

 

not used,

Field 10:

 

not used,

Field 11:

Number of sheets to run

Sheets to run:1,

Field 12:

 

not used,

Field 13:

 

not used,

Field 14:

Stock size required

Stock Size: 48.00 X 19.82,

Field 15:

Name of NCCODE file displayed in barcode 3 of 9 font

MDF75_1.out

Field 16:

 

 

Field 17:

 

 

Field 18:

 

 

Field 19:

 

 

Field 20:

 

 

Field 21:

 

 

Using the Insert, Space, and New Line buttons, you can make the layout for you’re your new labels.

Because of the size of this label, I was able to fit all of the fields on this label.

Remember, the size of the label you choose dictates how much information (or how many fields) you can actually place on the label.

clip0021

Notice the placement of fields 14 and 15.  This will be important because placing it at the bottom of the label; these fields will be at the bottom of the Bar Code.

Also notice that Field 13 is not on the label above.  This is explained next…

Field 13 is the graphic that can show the picture of your part on the label.

To place a graphic on the label, from the Database pull down menu, choose ‘Insert Image’

clip0022

Choose Field 13 and click 'OK'.

clip0023

By default, the graphic is placed in the upper left corner of the label.

 

 

clip0024

By grabbing and dragging, place the graphic box in the location you would like your graphic it be placed.  For this example, I have placed the graphic in the lower right corner.

clip0025

Field 15 is used to place a Bar Code graphic on the label.

First, from the Insert pull down menu, choose ‘Bar Code’.

clip0026

Your cursor will now change, drag from the upper left to the lower right to create a box.

 

clip0027

After the box is created, from the Database pull down menu, choose ‘Insert Fields’ and click on Field15 and click ‘Insert'.

 

clip0028

When finished, your label should look like this.

clip0029

NOTE: To prevent the bar code from becoming larger than the label and to have the name of the bar code shown, follow these steps:

Highlight the bar code image and right-click on the dotted edge.

Select 'Format Bar Code...' for the list.

Labels_FormatBarCode

This will open the Format Bar Code dialog box:

Labels_FormatBarCodeDialog

You want to make sure that 'Display Plaintext' and 'Adjust Size' are selected.

Now it’s time to save your label.  Choose 'Save’ or 'Save As’ from the file pull down menu.  The Save in: should be set to C:\Router-CIM\Automation\Bin.  

 
The filename MUST BE CALLED RouterCIM.zdp

 
If it is not named RouterCIM.zdp, it will not work.

clip0030

clip0031

PLEASE NOTE THE FILE NAME:

The only choice you have is to save it as a .zdl type at this point.

In the File name: type in RouterCIM.zdp and click 'Save'.

You should be asked if you would like to overwrite the file.  Answer ‘Yes’

clip0032

Copy the label.dbf file from the Template folder created in the beginning of the tutorial to the C:\Router-Cim\Automation\Bin folder and choose 'Yes' to overwrite the existing file.

Then delete the copy of the label.dbf file in the Template folder you created.

You are finished….run a job through Automation.

When the job if finished and you open the Data Folder, you will see a RouterCIM.zpd file. Double-click on it. You will probably have to set the path for windows to open this type of file.

The application to use would be the Labeler.exe found in C:\Program Files\Avery Dennison\DesignPro 5.0 Limited Edition folder.