Easyjet Xp600 Driver Install

The Ultimate Guide to EasyJet XP600 Driver Install: Step-by-Step Troubleshooting & Setup

Published by: TechPrint Solutions Reading Time: 8 minutes

If you've landed on this page, you are likely staring at an "Unknown Device" error on your screen, holding a USB cable connected to an EasyJet printer powered by the ubiquitous XP600 printhead. You are searching for the correct "easyjet xp600 driver install" process.

You are not alone. The EasyJet series of large-format printers (often used for DTF, Eco-Solvent, and UV printing) relies heavily on the robust XP600 printhead. Unfortunately, manufacturers often provide poorly translated manuals or drivers on sketchy mini-CDs. This guide will walk you through every single step to get your printer recognized, configured, and printing flawlessly on Windows 10 and 11. easyjet xp600 driver install

Step 1: Download the Correct Driver

Do not use the generic EPSON XP600 driver from Epson’s website. Your EasyJet printer requires a specific "Miracula," "AcroRIP," or manufacturer-provided driver.

Best source: The USB flash drive included with your printer.
Alternative: Contact your seller (e.g., Amazon, AliExpress, local distributor) for a download link.
Warning: Avoid third-party "driver downloader" websites—they often contain malware.

Step 4: Port selection

Most users fail here. The installer will ask you to select a virtual USB port. The Ultimate Guide to EasyJet XP600 Driver Install:

Look for "USB001 (Virtual printer port for EasyJet)".
If you see "Epson" ports, ignore them. Select the one that says "EasyJet" or "USB Printing Support".
Click Next.

Error 1: "The system cannot find the file specified" (Error 0x80070002)

Cause: The installer is looking for a specific .dll file that is blocked by Windows Defender. Fix:

Go to Windows Security > Virus & threat protection > Protection history.
Find the blocked file (usually x64_easyjet_driver.dll).
Click Allow on device.
Restart the installer.

6) Verify installation

Device Manager should show the XP600 under correct category without warning icons.
Use the vendor’s utility or your target application to query device info or print a test output.
If the device doesn’t respond, try a different USB cable/port and reinstall.

Part 6: Advanced Configuration - RIP Software Integration

The driver alone is useless without RIP software. The EasyJet XP600 uses a CMYK + White or CMYK + Fluorescent ink configuration. Step 1: Download the Correct Driver Do not

Step 3: Install the USB driver (if standalone)

If a raw .inf driver is provided:

Plug in the printer via USB and power it on.
Open Device Manager → locate “Unknown device” or “XP600”.
Right-click → Update driver → Browse my computer → point to the folder with the .inf file.
Ignore any “driver signature” warning (test mode may be needed).