Eken+w70+v20+wm8850+firmware+link Fix May 2026

Eken W70 (v2.0) tablet is powered by the WonderMedia WM8850 SoC. Restoring or updating its firmware typically involves a simple SD card-based flashing process using files originally provided by Eken or community repositories. Firmware Details & Requirements WonderMedia WM8850. Device Version: W70 v2.0 (Note: Build numbers like v0.9.5 are also common). Tools Needed:

A micro SD card (standard capacity) and a computer to extract files. Firmware Download & Link

The primary stock firmware for this series is typically labeled as W70-1.1.0-2012-08-15 Official/Mirror Source:

Detailed firmware files and instructions are maintained on the CNX Software Firmware Archive Step-by-Step Installation Guide Prepare the Files : Download the firmware archive (usually in format) and uncompress it on your PC. Format SD Card

: It is recommended to use a clean micro SD card, though not strictly required if other files are present. Copy Directories : Transfer the following to the of your micro SD card: wmt_scriptcmd (script file) FirmwareInstall (directory folder). Initiate Flash Power off the tablet. Insert the micro SD card.

Power the tablet on. The system should automatically detect the files and begin the installation process. : Once the on-screen progress bar completes, remove the micro SD card

before the tablet reboots to prevent a loop of the installation process. Alternative: Rooting (RootBurner)

If you already have a functional firmware and only wish to gain root access, you can use the RootBurner

tool specifically designed for the WM8850. This tool uses the same flashing method but only updates the files necessary for root.

Flashing firmware will erase all user data and applications. Ensure your tablet is sufficiently charged before starting. for your tablet's serial number? WM8850-MID Tablet Firmware Files and Root Instructions

The Eken W70 tablet, specifically using the WonderMedia WM8850 chipset and V20 build (often marked on the PCB or screen, such as "W70_V20_20121114" or similar late 2012 dates), commonly requires specific WM8850 firmware files to be flashed via SD card. Key Information & Files: Firmware Source:

The most commonly referenced, working, and rooted firmware for Eken WM8850 MID tablets is available via a detailed guide by CNX Software File Needed:

Specifically look for firmware files designed for WM8850 (e.g., W70-1.1.0-2012-08-15.rar, or specifically for V20 boards) that include a FirmwareInstall folder and wmt_scriptcmd Rooting/Modification:

The provided firmware often includes rooted images, and additional rooting tools like RootBurner are specifically designed for this chipset. Flashing Method: Format a Micro SD card (FAT32). Extract the firmware files, copying the FirmwareInstall directory and wmt_scriptcmd to the root of the SD card. Insert the card into the powered-off tablet.

Turn on the tablet, and it should automatically enter the update process. eken+w70+v20+wm8850+firmware+link

Once finished, remove the SD card and delete the files to prevent re-flashing upon reboot.

Note: As this device is from 2012, many original Eken site links may be dead, making the archived links on tech forums (like CNX Software ) the primary source. wondermedia wm8850 | Early Bird Club

Finding the correct firmware for generic tablets powered by the VIA WM8850 chipset can be a challenge, especially for specific models like the Eken W70 (V20). Using the wrong build can lead to a "white screen" or a non-functional touchscreen.

This guide provides the necessary links and steps to restore your device. Firmware Download Links

Depending on your hardware revision, you may need one of the following:

Official Eken W70 V20 Firmware (Android 4.1.1): Download Link (Note: Use a verified mirror if the official Eken site is down).

Universal WM8850 Uberoid Tool: Many users prefer the Uberoid custom ROM for better performance and compatibility. You can find the latest version on the TechKnow Forum. Device Specifications

Before flashing, ensure your device matches these specs to avoid "bricking": Processor: VIA WM8850 (Cortex A9) 1.2GHz - 1.5GHz. GPU: Mali-400. Screen: 7-inch Capacitive, 800x480 resolution. RAM: 512MB DDR3. How to Flash Your Eken W70 V20

Flashing this device is done via a MicroSD card. Follow these steps:

Prepare the SD Card: Use a high-quality MicroSD card (8GB or less is recommended for compatibility). Format it to FAT32.

Extract Files: Unzip your firmware package. You should see a folder named FirmwareInstall and a file named wmt_scriptcmd.

Copy to Root: Move both the folder and the script file to the root directory of your SD card.

Power Off: Ensure your tablet is completely turned off and has at least 50% battery.

Insert and Boot: Insert the SD card into the tablet and power it on. Eken W70 (v2

Automatic Install: The WM8850 bootloader will detect the script. You will see a green progress bar on the screen. Do not touch the device during this process.

Remove and Reboot: Once the screen says "Please remove SD Card," pull the card out. The tablet will reboot automatically into the new firmware. Troubleshooting

Stuck at Logo: If the tablet hangs at the Eken logo for more than 10 minutes, try a different SD card or a different version of the firmware.

Touchscreen Not Working: This usually means the firmware uses a different kernel driver than your specific V20 revision. You may need to try the "Changeboot" tool included in Uberoid packages to swap the touchscreen driver.

Do you have the exact hardware version number found on the back of your tablet or on the internal motherboard?

(and its variants like the MID7) is a budget Android tablet powered by the WonderMedia (WMT)

processor. The "V2.0" designation usually refers to a specific motherboard revision, which is critical for finding compatible firmware to avoid "bricking" or hardware failure. Device Identification & Compatibility Processor: WonderMedia WM8850 (ARM Cortex-A9). Common Variants: is often rebranded as the " WM8850-MID

Importance of Board ID: Before flashing, users should identify their specific Board ID (e.g., MID7_8233_FT5306_bsr025v0) by opening the device and checking the physical motherboard label. Firmware & Update Procedures

Firmware for these devices is typically distributed as a .zip file containing a FirmwareInstall folder and a wmt_scriptcmd file. Details & Common Files Typical Version

Jelly Bean (Android 4.1) or ICS (4.0). Common firmware name: W70-1.5.1680-WIN8-1108.zip. Installation Method

1. Copy FirmwareInstall and wmt_scriptcmd to the root of a FAT32 formatted SD card. 2. Insert card into the tablet and power it on. 3. The device should automatically detect the script and start the flashing process. Customization

Users often need to edit the .fwc configuration files within the FirmwareInstall/config folder to match their specific hardware (like touch screen drivers). Key Resources

Rooting Tools: The device is often rooted by default in some firmware versions, or tools like RootBurner can be used.

Community Forums: Significant technical support and legacy firmware links can be found on platforms such as Android Tablet Forum and Early Bird Club. No official Eken support site exists anymore –

Warning: Since these devices are quite old, many official Eken support links are no longer active. Always verify the Build Number in the "About Tablet" settings before attempting an update to ensure you have a backup of the original version. WonderMedia Based - RSSing.com

I’m unable to provide a direct firmware download link for the Eken W70 (sometimes labeled with WM8850 chipset) because:

No official Eken support site exists anymore – Eken tablets from that era (early 2010s) are discontinued.
Firmware for WM8850 devices (WonderMedia ARM SoC) was often customized by different factories, so a “universal” firmware can brick your device.
Many “firmware links” online are dead, malware-infected, or mismatched (e.g., wrong touchscreen driver, wrong Wi-Fi module).

Option A: The Internet Archive (Most Reliable)

The Wayback Machine has saved several firmware packages. Look for the file W70_V20_WM8850_20131014.rar or similar.

Direct Search Link: https://archive.org/search?query=eken+wm8850
Specific File Name to look for: W70_20130320_update.rar or V20_4.0.3_20131014.7z

Troubleshooting: When the Firmware Link Works But Flash Fails

Even with the correct eken w70 v20 wm8850 firmware link, you may encounter errors. Here is how to fix them:

Updating Firmware

Download the Firmware: Once you've found a reliable source, download the firmware update. It might come in a ZIP or CAB file format, depending on the device and the update.
Connect Your Device to Your Computer: Use a USB cable to connect your device to your computer. Make sure your device is recognized by your computer.
Use Device-Specific Software: Some devices come with specific software for updating firmware. If that's the case for your EKEN device, use that software to update the firmware.
Manual Installation: If your device doesn't have specific software, you might need to manually place the firmware files in the correct directory on your device. This usually involves using ActiveSync or Windows Device Manager (for older Windows versions).
Hard Reset (Optional): In some cases, after updating firmware, a hard reset might be recommended or required to ensure that the new firmware functions properly. Be warned: A hard reset will erase all data on your device, so ensure you've backed up everything.

Part 5: Troubleshooting Common Errors

Step 4: The Flash Process

PhoenixSuit will show a progress bar (Formatting → Writing → Verifying).
Do not disconnect the USB cable. The process takes 3–5 minutes.
Once finished, the tablet will reboot automatically. The first boot will take up to 10 minutes (Android is rebuilding the cache).

Option B: TechKnows (TechKnows.dk) - Eternal Goldmine

A user named "Kyle" on TechKnows preserved dozens of WM8850 dumps. Visit:

URL: techknots.dk (Search for "WM8850" or "Eken")
Expected File: wm8850_eken_v20_4.0.3_rooted_fixed.img

After Flashing: What to Expect

Once your EKEN W70 or V20 boots successfully, you will be running Android 4.0.4 (Ice Cream Sandwich) or Android 4.1.1 (Jelly Bean) . Do not expect Google Play Store to work immediately. You will need to:

Install Google Apps (GApps): Download the “GApps for WM8850 ARMv7” package and install via the built-in recovery.
Calibrate the touchscreen: Go to Settings → Touch Calibration (follow the crosshairs).
Root the tablet: Use “TPSparkyRoot” or “Bin4ry Root” – standard one-click roots rarely work on WM8850.

How to identify correct firmware

Confirm exact model number on the camera and PCB.
Check current firmware version in camera settings or about screen.
Match chipset (WM8850) and hardware revisions — mismatches can brick devices.
Prefer firmware from official vendor or reputable community builds tested on the exact model.