Epson 1390 Resetter: ((hot))
The Ultimate Guide to the Epson 1390 Resetter: Fixing Ink Pad Counter Errors for Good
If you own an Epson Stylus Photo 1390 (or its close relative, the Epson Photo R1390), you are likely aware of one of its most frustrating design flaws: the Waste Ink Pad Counter. After years of reliable photo printing, your printer suddenly stops working. The red lights flash, a message pops up on your PC, and the screen reads: “Parts inside your printer are at the end of their service life.”
Before you throw a perfectly good photo printer into the trash, you need to meet your new best friend: the Epson 1390 Resetter.
In this article, we will explain what a resetter is, why you need it, how to use it safely, and where to find reliable software. epson 1390 resetter
How to Use (Basic Steps)
- Download the Epson 1390 Resetter (e.g., “AdjProg” or dedicated “WICReset” utility).
- Turn on the printer and connect it via USB.
- Run the resetter as Administrator.
- Select your printer model (Epson 1390 / R1390 / Artisan 1430 – similar models often share the same tool).
- Click “Waste ink pad counter” → “Check” → “Reset”.
- Turn the printer off and on. The error should be cleared.
1. Core Function: Counter Reset
- Effectiveness: 10/10. If your printer is physically functional (motors working, no hardware damage), the software will instantly clear the error.
- Speed: The reset process takes less than 30 seconds once the software is open.
What is an Epson 1390 Resetter?
An Epson 1390 Resetter (also known as a Waste Ink Pad Counter Reset Utility or Adjustment Program) is a piece of software designed to reset the internal counter inside your printer’s memory.
The Epson 1390 tracks how much ink has been used to clean the printhead. This waste ink flows into a sponge pad at the bottom of the machine. Epson programs the printer to stop working after approximately 15,000 to 20,000 page cleans, assuming the sponge is full. The Ultimate Guide to the Epson 1390 Resetter:
However, in most cases, the sponge is not actually full. The counter is simply hitting a pre-programmed limit. The resetter tricks the printer into thinking the pad is brand new, allowing you to continue printing.
Pros & Cons
| Pros | Cons | |------|------| | Saves money on service center fees | Does not physically replace ink pads | | Extends printer life significantly | May void warranty (if still under warranty) | | Quick (takes 2 minutes) | Requires basic PC skills | | Works offline | Some versions trigger antivirus false positives | Download the Epson 1390 Resetter (e
Common Issues & Troubleshooting
Problem: The resetter says "Communication Error." Fix: Your printer is not in Service Mode. Repeat the button sequence exactly. Also, try a different USB port (USB 2.0 works best, avoid USB 3.0 ports sometimes).
Problem: The resetter is in Chinese. Fix: Most Epson service tools are bilingual. Look for a button that says "English" or a globe icon in the top right corner.
Problem: After reset, the printer prints blank pages or missing colors. Fix: The resetter only fixes the counter. If you have nozzle clogs, run a head cleaning cycle from the driver. The reset does not affect ink flow.
Problem: Windows blocks the software as a virus. Fix: The resetter manipulates low-level printer firmware. Antivirus software often flags this as "HackTool." You must temporarily disable Windows Defender/Real-time protection to use it.