Epson M2120 Resetter __exclusive__ Free Install May 2026

Report: "epson m2120 resetter free install"

Step 4: Connect Your M2120

1. Connect the USB cable from the printer to your PC.
2. Ensure no other Epson software (like Status Monitor) is running in the system tray.

Option C: External Waste Tank Mod (Permanent)

Drill a small hole in the case, attach a tube from the pump to an external bottle. This makes the counter reset truly indefinite.

---

Step 3: Prepare the Printer

1. Turn on the Epson M2120.
2. Connect it directly to your PC via USB (Wi-Fi resets often fail).
3. Ensure there is paper in the tray (the printer may do a cleaning cycle after reset).
4. Cancel any error messages on the printer’s screen by pressing "OK" or "Cancel."

Option A: Clean the Waste Pad (Free)

1. Remove the back panel of the M2120 (usually 4 screws).
2. Locate the rectangular sponge pad (approx. 4x6 inches).
3. Wear gloves. Remove the pad and rinse under warm water until water runs clear.
4. Wring it out, let it dry completely (24+ hours), then reinstall.