Eusbhubfilter Uninstall Top -

If the driver is preventing other software from running, you can remove it using these primary methods: 1. Registry Editor Removal (Most Common Fix)

This method removes the driver from the Windows "UpperFilters" list, which often clears the "Monitoring Software Detected" error. Step 1: Press Windows + R, type regedit, and hit Enter.

Step 2: Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\36fc9e60-c465-11cf-8056-444553540000. Step 3: On the right side, find the UpperFilters entry.

Step 4: Double-click UpperFilters and delete only the line that says EUsbHubFilter. Leave other entries (like vboxusb or usbhub) alone. Step 5: Restart your computer. 2. Uninstall Related Software

The driver is usually bundled with specific applications. Uninstalling these programs via the Control Panel often removes the associated filter.

FlexiHub / USB Redirector: These are the most common sources for this specific filter driver.

EaseUS Todo Backup: Some versions use various Eu... drivers for disk and USB monitoring.

Procedure: Go to Settings > Apps > Installed Apps, find the software, and select Uninstall. 3. Command Line (Advanced)

If you cannot find the software, you can attempt to delete the driver service directly using an administrative Command Prompt: Type: sc stop EUsbHubFilter Type: sc delete EUsbHubFilter Why This Happens

Mobile unlocking tools like UnlockTool detect filter drivers because they can be used to redirect USB traffic over a network, which is often blocked to prevent unauthorized remote servicing.

To resolve the "Please Uninstall EUsbHubFilter" error, you must remove the filter driver from your Windows Registry. This error usually appears when using mobile repair tools like UnlockTool, as they conflict with USB sharing software like FlexiHub. 🛠️ Step-by-Step Removal Guide

Follow these steps to remove the driver manually via the Registry Editor:

Open Registry EditorPress Win + R, type regedit, and hit Enter.

Navigate to the USB Class KeyCopy and paste this path into the address bar at the top:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\36fc9e60-c465-11cf-8056-444553540000

Identify the FilterOn the right-hand panel, look for a value named UpperFilters.

Edit the ValueDouble-click UpperFilters. If the data says EUsbHubFilter, delete that specific line or the entire value if it only contains that text.

Restart Your PCYou must restart for the changes to take effect and for the tool (like UnlockTool) to recognize your USB ports again. 💡 Why is this happening?

Source: The driver EUsbHubFilter.sys belongs to FlexiHub or USB Redirector.

Conflict: Many phone flashing/unlocking tools view these drivers as "monitoring software" or "remote USB sharing" and will refuse to run until they are uninstalled for security and stability reasons.

Impact: If left in the registry after the main software is uninstalled, it can sometimes cause USB ports to stop working entirely or lead to Blue Screen errors (PNP_DETECTED_FATAL_ERROR). ⚠️ Important Caution Before editing the registry:

Backup: Right-click the 36fc9e60... folder and select Export to save a backup. eusbhubfilter uninstall top

Check Software: If you still need FlexiHub, uninstalling the driver this way will break its functionality. If you'd like, I can help you:

Fix USB ports if they stopped working after you deleted the registry key.

Find the physical file (EUsbHubFilter.sys) to delete it from your drivers folder.

Identify other "monitoring" drivers if the tool still won't open. Let me know which specific tool you are trying to run! Blue screen issue when the device is attached to WSL #279

To uninstall the EUsbHubFilter driver—a common requirement for specialized mobile phone servicing software like UnlockTool —you typically need to

remove its registry entries or uninstall the software that installed it, such as Quick Fix Guide: Removing EUsbHubFilter

If you are receiving a "Monitoring Software Detected" error, follow these steps to manually remove the filter driver from your system registry. 1. Locate the Registry Key

The filter driver is usually attached to the Universal Serial Bus (USB) class in the Windows Registry. Navigate to the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\36fc9e60-c465-11cf-8056-444553540000 2. Delete the UpperFilters Entry

Inside this key, you will see several values on the right-hand side. Look for a value named UpperFilters Right-click UpperFilters and select

If you see other entries within the same value, only remove the string EUsbHubFilter 3. Uninstall Associated Software

This driver is frequently bundled with USB sharing or redirection software. Control Panel > Programs and Features Look for and uninstall software like USB Redirector If the driver persists, you can also use Microsoft's Autoruns tool to locate and disable the eusbhubfilter.sys driver service. 4. Restart Your Computer

A full system reboot is required for these changes to take effect and for the error message in tools like UnlockTool to disappear. Why is this necessary? Security-sensitive tools detect EUsbHubFilter

as a "monitoring" or "bridging" driver. Because this driver can redirect USB traffic over a network, it is often blocked by servicing tools to prevent unauthorized remote access during the unlocking process. backup your registry before making manual edits. Deleting the wrong key in the folder can cause your USB ports to stop working entirely. specific software on your machine might have installed this driver?

Uninstalling eUSBHubFilter: A Step-by-Step Guide

Are you looking to uninstall eUSBHubFilter from your system? This write-up provides a detailed guide on how to remove eUSBHubFilter, a USB hub filter driver, from your computer.

What is eUSBHubFilter?

eUSBHubFilter is a software component that acts as a filter driver for USB hubs. It is designed to manage and optimize USB hub connections, ensuring stable and efficient data transfer between devices. However, due to various reasons such as driver conflicts, system crashes, or simply a need for a clean slate, you might want to uninstall eUSBHubFilter.

Preparation

Before uninstalling eUSBHubFilter, make sure to: If the driver is preventing other software from

  1. Backup your data: Uninstalling a driver can potentially cause system instability or data loss. Ensure that you have backed up all important files and data.
  2. Disable any dependent applications: If any applications are using eUSBHubFilter, disable or close them to prevent any conflicts during the uninstallation process.

Uninstallation Methods

Method 3: Use a Driver Removal Tool (Safe & Thorough)

Tools like DriverStore Explorer (Rapr.exe) can remove orphaned drivers:

  1. Download DriverStore Explorer (open-source).
  2. Run as Administrator.
  3. Find eusbhubfilter.inf in the list.
  4. Select it and click Delete Driver (not “Force Delete” unless necessary).

Troubleshooting: What if the Drive Stops Working?

If you uninstall the eusbhubfilter driver and your external drive stops working or disappears, do not panic. This simply means the drive required that specific filter driver to communicate with Windows.

The Solution:

  1. Visit the website of the manufacturer of your USB enclosure (e.g., Sabrent, Orico, Vantec) or the chipset manufacturer (e.g., JMicron, ASMedia).
  2. Download the latest version of the driver specifically for your model.
  3. Install the fresh driver, which should replace the corrupted one you removed.

Issue: "USB Device not recognized" (Code 43)

Fix: Your USB stack is corrupted.

  1. Open Device Manager.
  2. Under Universal Serial Bus controllers, right-click every "Host Controller" and "Root Hub."
  3. Select Uninstall for all of them.
  4. Restart. Windows will automatically reinstall the standard Microsoft drivers.

Step C: Delete the Driver Service from Registry

  • Go to:
    HKLM\SYSTEM\CurrentControlSet\Services\eusbhubfilter
  • Delete the entire key.

✅ Final Verdict

| If you see “eusbhubfilter” | Action | |----------------------------|--------| | After uninstalling USB sharing software | ✅ Safe to remove | | Without known USB over IP tools | 🧪 Investigate with driverquery or Autoruns | | Causing BSOD | 🔥 Remove immediately |

Bottom line: eusbhubfilter is not a critical Windows driver. If you’re not actively using USB over IP software, removing it with uninstall top is likely safe — but verify the source first.

What it is: A driver component (eusbhubfilter.sys) for Etron USB 3.0 Host Controllers.

Common Issues: Many users report that this driver is outdated and conflicts with modern versions of Windows 10 and 11, leading to "DRIVER_IRQL_NOT_LESS_OR_EQUAL" errors.

The "Top" Solution: Because Windows now has native, high-performance USB 3.0 drivers, the best way to "uninstall" and fix issues is to replace it with the standard Microsoft driver. How to Uninstall and Replace It

If you are experiencing crashes related to this file, follow these steps to remove the filter driver and restore stability:

Open Device Manager: Right-click the Start button and select Device Manager.

Locate the Controller: Expand the Universal Serial Bus controllers section. Look for "Etron USB 3.0 Extensible Host Controller." Update Driver: Right-click the Etron entry and select Update driver. Choose Browse my computer for drivers.

Select Let me pick from a list of available drivers on my computer.

Select the Microsoft Version: Choose the USB xHCI Compliant Host Controller (the generic Microsoft version) instead of the Etron-specific one.

Finish and Restart: Click Next to install. Once finished, restart your PC. Verdict

Uninstalling or replacing eusbhubfilter is highly recommended if you are seeing system crashes. The generic Microsoft drivers are significantly more stable for these older Etron controllers on modern operating systems.

EUsbHubFilter is a USB filter driver typically associated with monitoring or remote USB access software like FlexiHub or Electronic Team products. Users often need to uninstall it because specialized mobile service tools, such as UnlockTool, will block execution if they detect this driver, flagging it as "Monitoring Software". Removal Methods

If a standard uninstallation via Settings > Apps & Features does not work, you must manually remove the driver registry key that acts as an "UpperFilter" on your USB controllers. Method 1: Registry Editor (Manual Removal)

This is the most effective way to clear the driver from being loaded by Windows: Press Win + R, type regedit, and hit Enter. Backup your data : Uninstalling a driver can

Navigate to the following path:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\36fc9e60-c465-11cf-8056-444553540000

In the right-hand pane, look for a multi-string value named UpperFilters. Right-click UpperFilters and select Modify.

Delete the line that says EUsbHubFilter. Leave other entries (like vbusb or usbhub) alone. Restart your computer for the changes to take effect. Method 2: Third-Party Uninstaller

If you want to remove all associated files and logs for FlexiHub, you can use specialized tools:

Revo Uninstaller: Search for "FlexiHub" within the app to scan for and delete leftover registry keys and junk files.

UnlockTool Built-in Fix: Newer versions of UnlockTool sometimes include a "Fix Driver" or "Uninstall USB Filter" button within their interface to automate this process. Why is this driver on your system?

This driver is usually installed by software used to share USB devices over a network. While legitimate, it is often flagged by security-sensitive software because it can intercept data between a USB device (like a phone being serviced) and the operating system.

To uninstall EUsbHubFilter , you must typically remove associated software like USB Redirector , then manually delete the filter entry from the Windows Registry . This error most commonly appears when using UnlockTool

, which detects these filters as "monitoring software" and prevents the application from running. Report on EUsbHubFilter Removal 1. Identifying the Source EUsbHubFilter eusbhubfilter.sys

) is a driver component associated with USB over IP and redirection services. It is primarily installed by: : A professional tool for remote access to USB devices. USB Redirector : Software used to share USB devices over a network. Electronic Team, Inc. software products. 2. Primary Removal Methods Method A: Standard Software Uninstallation

Before modifying the registry, attempt to remove the parent software through the Windows Control Panel: Revo Uninstaller Installed Apps USB Redirector and follow the prompts. Restart your computer. Method B: Registry Cleanup (Critical Step)

Even after uninstalling the software, the filter entry often remains in the registry, causing UnlockTool errors. , and press Enter. Navigate to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\36fc9e60-c465-11cf-8056-444553540000 In the right pane, look for the UpperFilters multi-string value. Right-click UpperFilters and select Remove the line containing EUsbHubFilter (leave other entries like if they exist). the PC to apply changes. 3. Advanced Removal of Stubborn Drivers

If the filter persists, you may need to manually remove the hidden device driver: Right-click the Start button and select Device Manager menu and select Show hidden devices Universal Serial Bus controllers

Right-click any entry related to FlexiHub or "USB Filter" and select Uninstall device Check the box for Attempt to remove the driver for this device Microsoft Learn 4. Summary of Why Removal is Necessary Tool Compatibility : Mobile repair tools like UnlockTool

use low-level USB access that conflicts with redirection filters. System Integrity

: Corrupted or outdated filters can cause USB ports to fail or prevent security features like Memory Integrity (Core Isolation) from being enabled. Microsoft Learn

Method 2: Uninstall through Control Panel

  1. Open Control Panel: Press the Windows key + X and select Control Panel from the menu.
  2. Programs and Features: Click on "Programs and Features" (in Windows 10/8) or "Add or Remove Programs" (in Windows 7).
  3. Find eUSBHubFilter: In the list of installed programs, look for "eUSBHubFilter" or a similar entry.
  4. Uninstall: Click on the eUSBHubFilter entry and select "Uninstall" or "Remove".

1. Overview

EUsbHubFilter.sys is a kernel-mode filter driver typically installed by:

  • VMware Workstation/Player (USB arbitration)
  • Certain USB redirection or virtualization tools
  • Legacy driver packages for USB over IP

Why uninstall?

  • Leftover after VMware removal
  • Causes blue screens (BSOD) or USB detection issues
  • Conflicts with new virtualization software
  • Manual driver cleanup needed due to failed uninstaller

"Top" approach = Remove from highest level (software) down to kernel driver, registry, and system files.

6. Troubleshooting

| Issue | Solution | |-------|----------| | “Access denied” deleting .sys | Boot into Safe Mode or use a live USB Linux environment | | USB ports stop working | Restore previous registry key or System Restore | | Driver keeps reappearing | Check for third-party USB virtualization software (e.g., USB Network Gate, FlexiHub) | | Blue screen after removal | Run DISM /Online /Cleanup-Image /RestoreHealth then SFC |