Firmware Reset Samsung Ml 2160 2165 2160w 2165w Link !!top!! -

For the Samsung ML-2160, ML-2165, ML-2160W, and ML-2165W series, a "firmware reset" typically refers to two distinct actions: a factory reset to clear errors or a fix firmware (resoftare) to bypass toner chip requirements. 1. Printing Configuration Reports

Before performing any firmware update or "fix," you must know your printer's specific data. Configuration Report : From a ready state, press and hold the Print Screen button (or

on 'W' models) for ~10 seconds until the green LED blinks slowly. Details Found: Serial Number (starts with 'Z') and Firmware Version Supplies Information Report

: Press and hold the same button for ~15 seconds until the LED stays green. Details Found: CRUM number (11-digit chip ID). 2. Manual Factory Reset

To clear memory and standard errors without installing new software: Method A (Buttons) : Turn off the printer. Hold the Stop/Cancel

button while turning it on. Continue holding for 10–15 seconds until the LEDs flash, then release and restart. Method B (Power Cycle)

: Turn off and unplug the device for at least 11 minutes to fully drain the capacitor and clear temporary memory. Farbtoner.com GmbH 3. Firmware Update & "Fix" Links firmware reset samsung ml 2160 2165 2160w 2165w link

If the "reset" is intended to allow refilled cartridges without new chips, you must use a "Fix Firmware" specifically generated for your SN and CRUM. Official Firmware

: Latest stable versions (e.g., V1.xx.02.03) can be found on HP Support (which now hosts Samsung printer drivers). Firmware Fix (Non-Official) : Sites like provide tools to flash "chipless" firmware. Installation Step : Drag the firmware file onto the usbprns2.exe tool while the printer is in "Download Mode". Download Mode : Turn off the printer. Hold the Stop/Cancel (or Print Screen) button and press . The LED should stay green/orange. Samsung ML-2160 Firmware - ORPYS

Firmware resets for Samsung ML-2160/2165 series printers involve either applying third-party "fix" firmware to bypass toner chip requirements or performing a factory reset to clear errors. Custom fix files, which require specific printer details, are available through providers like eReset. For official, standard firmware, you can visit the HP Support site.

Resetting the firmware on your Samsung ML-2160 , Go to product viewer dialog for this item. ,

, or 2165W allows you to use refilled toner cartridges without the printer blocking them due to an "empty" chip. This process involves applying a patched firmware fix that resets the page counter to 100% every time the printer restarts. Prerequisites for Firmware Reset

Before applying any fix, you must identify your specific printer details by printing two reports: For the Samsung ML-2160, ML-2165, ML-2160W, and ML-2165W

Configuration Report: Hold the Print Screen / WPS button for about 10 seconds until the LED flashes once. This report contains your Serial Number and Firmware Version.

Supplies Information: Hold the same button for about 15 seconds until the LED stays green. This report lists the CRUM series number, which is a unique 11-digit identifier for your cartridge chip. Step-by-Step Reset Procedure

Once you have obtained the appropriate firmware fix file for your CRUM and version:

Enter Download Mode: Turn the printer off. Press and hold the Print Screen button, then press and hold Power. Release both after a few seconds. Connect and Flash: Connect your printer to your PC via USB.

Run the Fix: Drag and drop the downloaded .hd firmware file onto the usbprns2.exe application provided in your reset package.

Reboot: The printer will program for 1–2 minutes and then automatically restart. Usability & Installation This is where the product

Disable the Chip: Once finished, you must remove or cover the toner chip with tape so the printer ignores the hardware counter and relies on the new firmware. Essential Resource Links

Custom Firmware Fixes: You can find specific firmware archives and custom reset services at ORPYS or through technical guides provided by eReset

Service & Troubleshooting: For deep technical resets or hardware issues, refer to the Elektrotanya Service Manual

or seek expert advice from community forums like JustAnswer.

Usability & Installation

This is where the product loses a star. The ease of use depends entirely on which version of the hardware you receive.

Method 2: SyncThru Web Service (Only for ML-2160W / ML-2165W wireless models)

If your printer is connected to your Wi-Fi network, you can perform a soft reset via the web interface.

  1. Print a network configuration page:
    • Press and hold the WPS button for about 10 seconds until it prints a report.
    • Find the printer’s IP address (e.g., 192.168.x.x).
  2. Open a web browser on a computer connected to the same network.
  3. Type the printer’s IP address into the address bar and press Enter.
  4. Log in:
    • Username: admin
    • Password: sec00000 (or blank, depending on firmware version).
  5. Go to Settings → Maintenance → Factory Reset (or Reset All Settings).
  6. Confirm the reset.
  7. The printer will reboot.

Result: All settings, including Wi-Fi credentials, are erased.

Pre-Reset Checklist

For Samsung ML-2160W, ML-2165W:

The wireless models might have slightly different procedures, but generally:

  1. Turn off the printer.
  2. Press and hold the "WPS" button (or "OK" button, depending on the model) while turning on the printer.
  3. Hold until specific indicators on the printer's control panel light up or a message appears.

Step 2: Prepare Your Printer