Firmware: Version Dwr-m960-v1.1.49

Firmware version v1.1.49 for the D-Link DWR-M960 (Hardware Revision Ax) is a specific update primarily known for addressing critical security vulnerabilities. Unlike feature-heavy updates, this version was a stability and security-focused release. Security & Critical Fixes

This version was released following a security report in November 2023 regarding the DWR-M960 Hardware Revision Ax.

Vulnerability Remediation: The primary goal of v1.1.49 was to patch vulnerabilities that could potentially allow unauthorized access or remote command execution.

Device Lifecycle: This version is often cited in the context of maintaining older hardware revisions that are not compatible with the newer v1.1.51+ firmware branches. Performance & Stability

Users typically report that v1.1.49 provides a "maintenance" level of stability:

Reliability: It is stable for standard 4G LTE and AC1200 Wi-Fi operations, resolving some intermittent connection drops found in earlier v1.0.x versions. firmware version dwr-m960-v1.1.49

Speed: No significant speed boost is reported compared to immediate predecessors; it remains limited by the hardware's Cat4 LTE capabilities (up to 150 Mbps downlink).

Interface: It retains the standard D-Link "Web UI" which is functional but lacks the modern dashboard features found in newer "M-series" successors. Summary of Pros & Cons Pros Security: Essential patch for known vulnerabilities. Legacy Status: No new features added; strictly maintenance. Stability: Mature firmware for the Ax hardware revision.

Hardware Bound: Only for Rev. Ax; using on other revisions may brick the device.

Availability: Easy to find on D-Link's Middle East and Africa support portals.

Manual Install: Often requires a manual flash via the web interface. Should You Update? Firmware version v1

Yes, if you are currently on a version lower than v1.1.49, you should update immediately due to the security risks associated with earlier builds. However, if your router supports it, check for v1.1.51, which succeeded this version with further stability improvements. How to Install

Download the correct firmware for your Hardware Version (Ax) from the official D-Link support site. Connect to your router via Ethernet at 192.168.0.1.

Go to Management > Upgrade or Maintenance > Firmware Upgrade.

Upload the .bin file and do not power off the device during the process. To provide more specific help, could you tell me:

What is the Hardware Version printed on your router's sticker (e.g., A1, B1)? Version Number: V1

Are you experiencing a specific issue (like Wi-Fi drops or slow 4G)?

Which region/country are you located in? (Firmware versions often vary by region).

Issue 2: LED Brightness Cannot Be Disabled

Old firmware allowed turning off all LEDs. Version v1.1.49 broke this feature. Workaround: Use electrical tape over the LEDs or switch to command-line control via Telnet (not recommended for average users).

Upgrade Recommendation

| From Version | Recommendation | |--------------|----------------| | < 1.1.40 | Recommended – fixes stability and IPv6 issues. | | 1.1.45–1.1.48 | Optional – upgrade only if experiencing UI sluggishness or LTE reconnection delays. | | 1.1.49 | No need to change. |

Key Details of Version V1.1.49

Version Number: V1.1.49
Likely Release Period: Late 2022 – Early 2023 (based on D-Link’s typical versioning)
Type: Maintenance / stability release

This version is not the latest as of 2026 (newer updates may exist, such as V1.2.xx or higher). It focuses on bug fixes rather than new features.