8-989-506-25-75
Избранное
Сравнение
Ваша корзина пуста!
Корзина

Unbricking an Infinix GT 20 Pro—a powerful device running on the MediaTek Dimensity 8200 Ultimate chipset—can feel daunting, but it usually comes down to one of two paths: a "soft" fix via Recovery Mode or a "hard" fix using a PC to flash the original firmware.

Below is the story of how to bring your device back from a bootloop or black screen. Step 1: The "Soft" Revival (No PC Required)

Sometimes the phone isn't fully "dead"; the system is just stuck in a loop. Before downloading heavy files, try a Hard Reset to clear the software glitch.

Force Shutdown: If stuck on the logo, hold the Power button for about 10–15 seconds until the screen goes black.

Recovery Key Combo: Press and hold the Volume Up and Power buttons simultaneously.

No Command Screen: When you see a fallen Android robot and the words "No Command," hold Power and quickly tap Volume Up.

Wipe Data: Use the volume keys to highlight "Wipe data/factory reset" and press Power to confirm. Reboot: Once finished, select "Reboot system now." Step 2: The "Hard" Revival (Flashing Stock Firmware)

If the Hard Reset fails, you have a "Hard Brick." You will need to rewrite the phone’s entire operating system using a computer. How to Unbrick INFINIX GT 20 Pro?, How To - HardReset.info

Unbricking an Infinix GT 20 Pro (X6871) depends on the severity of the "brick." Most issues are "soft bricks" caused by software glitches, while "hard bricks" (no screen response) require deeper flashing. Method 1: Force Restart (For Hangs/Bootloops) If your phone is stuck on the Infinix logo: Hold Power + Volume Down simultaneously for about 10–15 seconds.

Release once the phone vibrates or the screen goes black to force a reboot. Method 2: Factory Reset (For Soft Bricks) If you can reach the "No Command" screen or recovery menu: the device. Press and hold Power + Volume Up until the Infinix logo appears, then release. When "No Command" appears, hold Use volume keys to select Wipe data/factory reset and press Power to confirm. Reboot system now after the wipe is complete. Method 3: Flash Stock Firmware (For Hard Bricks)

If the phone is completely unresponsive but shows as "MediaTek USB Port" on a PC, you must flash the stock ROM. How to Download Firmware for INFINIX GT 20 Pro?, How To

Unbricking an Infinix GT 20 Pro (Model X6871) requires a systematic approach based on whether you are dealing with a soft brick (bootloops, stuck on logo) or a hard brick (black screen, no vibration, but recognized by a PC as a MediaTek USB Port).

Since this device uses the MediaTek Dimensity 8200 chipset, standard flashing procedures often involve the SP Flash Tool. 1. Troubleshooting Soft Bricks (Bootloops)

If your phone is stuck on the Infinix logo or keeps restarting, try these non-destructive steps first: How to restart INFINIX GT 20 Pro?, How To - HardReset.info

Unbricking an Infinix GT 20 Pro typically involves reinstalling the official stock firmware (ROM) to fix software-level failures like bootloops or a completely unresponsive screen. Because this device uses the MediaTek Dimensity 8200 Ultimate chipset, the process primarily uses the SP Flash Tool or the official Infinix Flash Tool. Step 1: Preparation and Requirements Before starting, ensure you have the following:

Computer: A Windows PC is required to run the flashing software.

Stock Firmware: Download the specific flash file for the Infinix GT 20 Pro (X6871).

Drivers: Install MediaTek USB VCOM drivers so your PC can communicate with the phone in "BROM" or "Preloader" mode.

Tools: Download the latest version of SP Flash Tool or Infinix Flash Tool.

Battery: Ideally, the device should have at least 30% charge, though for a hard-bricked device, this may not be visible. Step 2: Entering Recovery Mode (For Soft Bricks)

If your phone still powers on but is stuck in a bootloop, a simple Hard Reset might fix it without full flashing:

Scenario A: Soft Brick (The phone shows signs of life)

Steps to enter Recovery Mode:

  1. Turn off the phone (if stuck, force restart as above).
  2. Press and hold Volume Up + Power button together.
  3. Release both buttons when the INFINIX logo appears.

5. Advanced Unbrick (Auth Bypass for MTK)

The INFINIX GT 20 Pro uses MediaTek SLA/DAA security (Secure Boot). SP Flash Tool may show:

Solution:

2. Pre-Requisites (Tools & Files)

Method 3: Flash Stock Firmware (Hard Brick – No Display, No Vibration)

You’ll need a PC and the correct firmware.

Tools required:

Steps:

  1. Install MTK USB drivers and SP Flash Tool on PC.
  2. Extract the firmware zip.
  3. Open SP Flash Tool → Click Scatter-loading → Select MT6899_Android_scatter.txt from firmware folder.
  4. Set download mode to Firmware Upgrade or Format All + Download (will erase everything).
  5. Turn off your GT 20 Pro completely.
  6. Click Download in SP Flash Tool.
  7. Now connect the powered-off phone via USB to PC.
  8. Wait for red/yellow progress bar – it will flash automatically.
  9. A green check mark means success.
  10. Disconnect and hold Power button for 10 seconds to boot.

What you need:

Method 4: Use Auth Bypass (if SP Flash Tool gives S_BROM_CMD error)

Newer INFINIX models have SLA/DAA protection. Use MTK Bypass Utility:

  1. Run bypass.exe (as admin).
  2. Connect powered-off phone → “Protection disabled” appears.
  3. Without disconnecting, flash normally with SP Flash Tool.

Gt 20 Pro !!top!!: How To Unbrick Infinix

Unbricking an Infinix GT 20 Pro—a powerful device running on the MediaTek Dimensity 8200 Ultimate chipset—can feel daunting, but it usually comes down to one of two paths: a "soft" fix via Recovery Mode or a "hard" fix using a PC to flash the original firmware.

Below is the story of how to bring your device back from a bootloop or black screen. Step 1: The "Soft" Revival (No PC Required)

Sometimes the phone isn't fully "dead"; the system is just stuck in a loop. Before downloading heavy files, try a Hard Reset to clear the software glitch.

Force Shutdown: If stuck on the logo, hold the Power button for about 10–15 seconds until the screen goes black.

Recovery Key Combo: Press and hold the Volume Up and Power buttons simultaneously.

No Command Screen: When you see a fallen Android robot and the words "No Command," hold Power and quickly tap Volume Up.

Wipe Data: Use the volume keys to highlight "Wipe data/factory reset" and press Power to confirm. Reboot: Once finished, select "Reboot system now." Step 2: The "Hard" Revival (Flashing Stock Firmware) How to Unbrick INFINIX GT 20 Pro

If the Hard Reset fails, you have a "Hard Brick." You will need to rewrite the phone’s entire operating system using a computer. How to Unbrick INFINIX GT 20 Pro?, How To - HardReset.info

Unbricking an Infinix GT 20 Pro (X6871) depends on the severity of the "brick." Most issues are "soft bricks" caused by software glitches, while "hard bricks" (no screen response) require deeper flashing. Method 1: Force Restart (For Hangs/Bootloops) If your phone is stuck on the Infinix logo: Hold Power + Volume Down simultaneously for about 10–15 seconds.

Release once the phone vibrates or the screen goes black to force a reboot. Method 2: Factory Reset (For Soft Bricks) If you can reach the "No Command" screen or recovery menu: the device. Press and hold Power + Volume Up until the Infinix logo appears, then release. When "No Command" appears, hold Use volume keys to select Wipe data/factory reset and press Power to confirm. Reboot system now after the wipe is complete. Method 3: Flash Stock Firmware (For Hard Bricks)

If the phone is completely unresponsive but shows as "MediaTek USB Port" on a PC, you must flash the stock ROM. How to Download Firmware for INFINIX GT 20 Pro?, How To

Unbricking an Infinix GT 20 Pro (Model X6871) requires a systematic approach based on whether you are dealing with a soft brick (bootloops, stuck on logo) or a hard brick (black screen, no vibration, but recognized by a PC as a MediaTek USB Port).

Since this device uses the MediaTek Dimensity 8200 chipset, standard flashing procedures often involve the SP Flash Tool. 1. Troubleshooting Soft Bricks (Bootloops) Unbricking an Infinix GT 20 Pro —a powerful

If your phone is stuck on the Infinix logo or keeps restarting, try these non-destructive steps first: How to restart INFINIX GT 20 Pro?, How To - HardReset.info

Unbricking an Infinix GT 20 Pro typically involves reinstalling the official stock firmware (ROM) to fix software-level failures like bootloops or a completely unresponsive screen. Because this device uses the MediaTek Dimensity 8200 Ultimate chipset, the process primarily uses the SP Flash Tool or the official Infinix Flash Tool. Step 1: Preparation and Requirements Before starting, ensure you have the following:

Computer: A Windows PC is required to run the flashing software.

Stock Firmware: Download the specific flash file for the Infinix GT 20 Pro (X6871).

Drivers: Install MediaTek USB VCOM drivers so your PC can communicate with the phone in "BROM" or "Preloader" mode.

Tools: Download the latest version of SP Flash Tool or Infinix Flash Tool. Scenario A: Soft Brick (The phone shows signs of life)

Battery: Ideally, the device should have at least 30% charge, though for a hard-bricked device, this may not be visible. Step 2: Entering Recovery Mode (For Soft Bricks)

If your phone still powers on but is stuck in a bootloop, a simple Hard Reset might fix it without full flashing:

Scenario A: Soft Brick (The phone shows signs of life)

Steps to enter Recovery Mode:

  1. Turn off the phone (if stuck, force restart as above).
  2. Press and hold Volume Up + Power button together.
  3. Release both buttons when the INFINIX logo appears.

5. Advanced Unbrick (Auth Bypass for MTK)

The INFINIX GT 20 Pro uses MediaTek SLA/DAA security (Secure Boot). SP Flash Tool may show:

Solution:

2. Pre-Requisites (Tools & Files)

Method 3: Flash Stock Firmware (Hard Brick – No Display, No Vibration)

You’ll need a PC and the correct firmware.

Tools required:

Steps:

  1. Install MTK USB drivers and SP Flash Tool on PC.
  2. Extract the firmware zip.
  3. Open SP Flash Tool → Click Scatter-loading → Select MT6899_Android_scatter.txt from firmware folder.
  4. Set download mode to Firmware Upgrade or Format All + Download (will erase everything).
  5. Turn off your GT 20 Pro completely.
  6. Click Download in SP Flash Tool.
  7. Now connect the powered-off phone via USB to PC.
  8. Wait for red/yellow progress bar – it will flash automatically.
  9. A green check mark means success.
  10. Disconnect and hold Power button for 10 seconds to boot.

What you need:

Method 4: Use Auth Bypass (if SP Flash Tool gives S_BROM_CMD error)

Newer INFINIX models have SLA/DAA protection. Use MTK Bypass Utility:

  1. Run bypass.exe (as admin).
  2. Connect powered-off phone → “Protection disabled” appears.
  3. Without disconnecting, flash normally with SP Flash Tool.

Мы используем файлы cookie для вашего удобства. Продолжая пользоваться сайтом, вы соглашаетесь с политикой использования cookie.  Подробнее

Продажа и активация SIM-карт и тарифов осуществляется строго по паспорту, лицам достигшим 18 лет, в соответствии с Федеральным Законом “О связи” 126-ФЗ.