Hp Nvme Ssd -313- Error ^hot^ «EASY | OVERVIEW»

Decoding the HP NVMe SSD -313- Error: Causes, Diagnosis, and Permanent Fixes

Hard Drive Error 313 is a well-known code in the HP ecosystem, but its meaning has evolved over the last decade. Older articles online refer to "Hard Drive 1 Quick Test Failure" or generic SMART errors. However, if you are seeing the specific error message "Hard Drive 1 – NVMe SSD – (313)" during HP’s Power-On Self-Test (POST) or the UEFI diagnostics, you are dealing with a modern NVMe drive issue.

This error code is distinct because it appears before the operating system loads. It indicates that the SSD has failed the HP PC Hardware Diagnostics (UEFI) test. For end-users and IT professionals, seeing this message usually means the computer will not boot to Windows, Linux, or any installed OS.

In this article, we will dissect exactly what error 313 means, why it happens specifically to HP NVMe SSDs, how to recover your data, and—critically—how to fix the error or replace the drive. hp nvme ssd -313- error

Solution 2: Manually Loading Drivers

If you have a specific requirement to use RAID mode (for performance optimization or Intel Optane usage) or if Solution 1 did not work, you must manually load the driver during the Windows installation.

  1. Download the Driver: On a separate working computer, go to the HP Support website for your specific model. Navigate to the Drivers section and look for Intel Rapid Storage Technology Driver (Intel RST) or Intel Chipset Driver.
  2. Extract to USB: Download the driver (usually a .exe file). You may need to run it on the working PC to extract the files, or open it with a file compression tool like 7-Zip. Copy the extracted folder to a USB thumb drive.
  3. Load Driver:
    • Boot your HP computer from the Windows Installation USB.
    • When you reach the error screen ("No drives were found"), click Load Driver.
    • Insert the USB drive containing the drivers.
    • Click Browse and navigate to the folder on the USB drive. Look for a subfolder usually named f6flpy-x64 or similar.
    • Select the driver (it will usually be labeled "Intel Chipset SATA RAID Controller" or "Intel NVMe Controller").
    • Click Next.

Once the driver installs, your SSD will appear in the list, and the 313 error will be resolved. Decoding the HP NVMe SSD -313- Error: Causes,

Step 1: The "Paper Towel" Test (Thermal Reset)

  • Remove the bottom cover of your HP laptop.
  • Unplug the battery and the NVMe SSD.
  • Wait 60 seconds. Reinstall the SSD, but do not screw it down.
  • Action: Place a folded paper towel over the SSD controller chip (the square chip, not the long black NAND chips).
  • Reassemble and boot. Why? If the drive is overheating instantly, the paper towel acts as temporary insulation. If the error disappears for 5 minutes, your drive has a thermal short.

How it works when error -313 appears:

  1. Instant user notification with plain English explanation:
    “Drive sectors are failing and data may be lost soon.”

  2. Automated critical data migration to a designated backup drive or cloud folder (user-defined). Download the Driver: On a separate working computer,

  3. Firmware-level read-only mode for the failing drive to prevent further writes and allow last-chance data recovery.

  4. Guided replacement workflow:

    • Detects compatible HP spare drives
    • Offers to clone remaining healthy data
    • Provides a QR code/link to order a replacement with current system config saved.

  5. Logs SMART attributes before failure to help HP improve future drive reliability.

If Real Failure (media_errors > 0 or spare < 10%):

  1. Immediate backup (drive may lock to read-only soon).
  2. Replace under HP warranty – -313 qualifies for replacement.
  3. After replacement, update BIOS and NVMe driver (Intel RST or generic NVMe).
  4. Avoid filling drive >90% (reduces spare reallocation stress).

Preventing Error 313 in the Future

  • Keep HP Support Assistant running to get critical SSD firmware updates (OEM drives often release FWD4212-style patches).
  • Disable Windows Fast Startup (Control Panel → Power Options → Choose what power buttons do). Fast Startup bypasses POST, which can hide early signs of failure.
  • Monitor NVMe temperatures. Use HWInfo64. If your drive exceeds 85°C, consider a thermal pad upgrade (HP laptops are notorious for poor M.2 cooling).
  • Perform a manual HP Diagnostic once per month (F2 → Hard Drive → Quick Test).