Hpe Smart — Array S100i Sr Gen10 Driver Windows Server 2022

The HPE Smart Array S100i SR Gen10 is a software-based RAID solution that requires specific drivers to function correctly under Windows Server 2022. While it provides essential data protection features like rebuilding arrays after drive failure, its software-only nature means RAID processing relies on the system's CPU, which can lead to performance variations depending on your hardware configuration.  Driver Compatibility and Downloads 

For Windows Server 2022, you should use the latest qualified drivers to ensure stability and performance. 

HPE Smart Array S100i SR Gen10 SW RAID Driver: Version 1010.14.0.0(C) is the official release supporting Windows Server 2022.

Alternative Driver Package: For broader compatibility, the HPE Smart Array Gen10, Gen10Plus and Gen11 Controller Driver also supports Windows Server 2022/2025 and is recommended for use alongside specific controller firmware (version 8.00).  Installation and Setup 

Because the S100i driver is not included in the standard Windows installation media, the OS will not recognize your RAID logical volumes by default during setup. 

Assisted Installation: Use HPE Intelligent Provisioning during setup; it automatically injects the necessary drivers, requiring no manual intervention.

Manual Injection: If installing from standard media, you must: Extract the driver files to a FAT32-formatted USB drive.

During the "Where do you want to install Windows?" step, click Load Driver and point to the folder on your USB drive.

BIOS Configuration: Ensure the "Embedded SATA Configuration" in the UEFI System Utilities (F9) is set to Smart Array SW RAID Support. Note that this feature is not supported in Legacy BIOS mode.  Performance and Management 

Management Tools: Use the HPE Smart Storage Administrator (SSA) GUI or CLI to configure and monitor your arrays. Since the S100i is a "RAID-only" controller, individual physical drives are masked from the OS and only logical volumes are exposed.

Performance Note: Some users have reported performance drops in RAID-5 configurations on specific Gen10 Plus models; ensuring you have the latest firmware and driver combination is critical for optimal throughput. 

HPE Smart Array S100i SR Gen10 is a driver-based (Software RAID) solution integrated into HPE ProLiant Gen10 servers. For Windows Server 2022

, a dedicated driver is available to enable full functionality and RAID management, as the OS installation media does not include these drivers natively. Hewlett Packard Enterprise Driver Details & Support Support Status: Windows Server 2022 is fully supported. Key Version: 1010.14.0.0(C)

(or newer) is the primary driver for Windows Server 2022. Note that older versions like 106.12.6.0(D) primarily targeted Server 2019 but may still load on Server 2022. Functionality:

Supports RAID levels 0, 1, 5, and 10 for up to 14 SATA drives. It operates in "Mixed Mode," allowing both RAID and HBA (Host Bus Adapter) operations simultaneously. Hewlett Packard Enterprise Installation & Deployment

Since Windows Server 2022 will not see your RAID volumes by default, you must provide the driver during the OS setup. Hewlett Packard Enterprise

The HPE Smart Array S100i SR Gen10 is an entry-level, driver-based software RAID solution integrated into HPE ProLiant Gen10 servers.

While it was originally designed for Windows Server 2016 and 2019, HPE has released a dedicated driver specifically to support Windows Server 2022. 🛠️ Key Driver Features

Operating System Support: Native support for Windows Server 2022 (Standard, Datacenter, and Essentials).

RAID Level Capabilities: Supports RAID 0, 1, 5, and 10 for SATA drives. hpe smart array s100i sr gen10 driver windows server 2022

Connectivity: Manages up to 14 SATA lanes connected to embedded system board ports.

Management Integration: Fully compatible with the HPE Smart Storage Administrator (SSA) and iLO 5 for remote monitoring and configuration. 🚀 Technical Performance & Limits

HPE Smart Array P408i‑a SR Gen10 12G SAS Modular Controller

Installing HPE Smart Array S100i SR Gen10 Driver on Windows Server 2022

HPE Smart Array S100i SR Gen10 is a popular RAID controller used in HPE ProLiant Gen10 servers. If you're running Windows Server 2022 on a ProLiant Gen10 server with an S100i SR Gen10 controller, you'll need to install the proper driver to ensure optimal performance and functionality. In this article, we'll guide you through the process of installing the HPE Smart Array S100i SR Gen10 driver on Windows Server 2022.

Why Install the Driver?

The HPE Smart Array S100i SR Gen10 driver is essential for Windows Server 2022 to recognize and interact with the RAID controller. Without the driver, you may experience:

• Inability to detect or configure RAID sets
• Limited performance and throughput
• Incompatibility issues with certain Windows Server 2022 features

Prerequisites

Before installing the driver, ensure you have:

• A HPE ProLiant Gen10 server with an S100i SR Gen10 controller
• Windows Server 2022 installed on the server
• Access to the internet for downloading the driver

Downloading the Driver

You can download the HPE Smart Array S100i SR Gen10 driver from the HPE website:

1. Go to the HPE Support website
2. Click on "ProLiant" and select "Gen10" as the server model
3. Choose "Smart Array" as the controller type and select "S100i SR Gen10"
4. Select "Windows Server 2022" as the operating system
5. Download the driver package (e.g., hpe-s100i-sr-gen10-driver-windows-2022.zip)

Installing the Driver

To install the driver, follow these steps:

1. Extract the driver package: Unzip the downloaded package to a folder on your server (e.g., C:\drivers\s100i-sr-gen10)
2. Open Device Manager: Press the Windows key + X and select Device Manager
3. Locate the S100i SR Gen10 controller: In Device Manager, expand "Storage controllers" and look for "HPE Smart Array S100i SR Gen10 Controller" (it may be listed as "Unknown device" if the driver is not installed)
4. Update the driver: Right-click on the S100i SR Gen10 controller and select "Update driver"
5. Browse for the driver: Click "Browse my computer for driver software" and navigate to the extracted driver folder (e.g., C:\drivers\s100i-sr-gen10)
6. Install the driver: Select the driver package (e.g., hpe-s100i-sr-gen10-driver.inf) and click "Install"
7. Restart the server: Once the driver is installed, restart your server to ensure the changes take effect

Verifying the Driver Installation

After restarting your server, verify that the driver is installed correctly:

1. Open Device Manager: Press the Windows key + X and select Device Manager
2. Locate the S100i SR Gen10 controller: In Device Manager, expand "Storage controllers" and look for "HPE Smart Array S100i SR Gen10 Controller"
3. Check the driver version: Right-click on the S100i SR Gen10 controller and select "Properties". In the Properties window, click on the "Driver" tab to verify the driver version

Conclusion

Installing the HPE Smart Array S100i SR Gen10 driver on Windows Server 2022 is a straightforward process. By following these steps, you can ensure that your RAID controller is properly recognized and configured, providing optimal performance and functionality for your ProLiant Gen10 server. If you encounter any issues during the installation process, consult the HPE documentation or contact HPE support for assistance.

The HPE Smart Array S100i SR Gen10 is a software-based RAID solution integrated into the chipset of many HPE ProLiant Gen10 servers. While it offers a cost-effective way to manage SATA drives, its "software RAID" nature means it relies heavily on the operating system's driver to function.

When moving to Windows Server 2022, many administrators find that the installer does not see their logical drives. This guide covers how to find, load, and troubleshoot the S100i driver for a smooth Windows Server 2022 deployment. Understanding the S100i SR Gen10 The HPE Smart Array S100i SR Gen10 is

The S100i is unique because it is not a physical hardware controller with its own processor and cache. Instead, it uses the Intel RSTe (Rapid Storage Technology enterprise) logic built into the motherboard.

Because the controller is software-defined, it requires the HPE Smart Storage Administrator (SSA) to configure the arrays and a specific driver for the OS to communicate with those arrays. Without the driver, Windows will either see the individual physical disks (bypassing the RAID) or see no disks at all. Where to Download the Windows Server 2022 Driver

HPE provides specific drivers for Windows Server 2022. Using older drivers intended for Server 2016 or 2019 can lead to stability issues or "Inaccessible Boot Device" Blue Screen of Death (BSOD) errors. Go to the HPE Support Center website.

Search for your server model (e.g., DL360 Gen10 or ML110 Gen10). Filter the Operating System to Windows Server 2022.

Look for the "HPE Smart Array S100i SR Gen10 Software RAID Driver for Windows Server 2016, 2019, and 2022." Download the .exe file (the "CP" or Component Pack format). How to Extract the Driver for OS Installation

During a fresh Windows installation, you cannot run an .exe file. You need the raw driver files (.inf, .sys, .cat). Run the downloaded .exe on a separate Windows machine. Choose the "Extract" option rather than "Install." Copy the extracted folder to a USB flash drive.

Plug this USB drive into the HPE server before starting the Windows installation. Step-by-Step Installation Guide

Boot the server and press F10 to enter Intelligent Provisioning or F11 for the Boot Menu. Boot from your Windows Server 2022 installation media.

When you reach the screen "Where do you want to install Windows?" the list will likely be empty. Click "Load Driver."

Browse to the USB folder containing the extracted S100i driver.

Select the driver. Once loaded, your RAID logical drive (e.g., RAID 1 or RAID 5) should appear in the list. Proceed with the installation as normal. Common Troubleshooting Tips

The "No Disks Found" IssueIf the disks still don't appear after loading the driver, reboot and press F9 to enter System Utilities. Navigate to System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options. Ensure the controller is set to "HPE Smart Array S100i SR Gen10" and NOT "Legacy BIOS" or "Intel RSTe."

Performance ConsiderationsBecause the S100i uses the system CPU for RAID calculations, it is best suited for RAID 0, 1, and 10. Avoid using RAID 5 on the S100i for write-heavy workloads, as the performance penalty is significant compared to a hardware controller like the P408i-a.

Driver Updates via SPPOnce the OS is installed, the best way to keep the driver updated is through the HPE Service Pack for ProLiant (SPP). The SPP ensures the S100i driver stays in sync with the server's firmware versions.

HPE Smart Array S100i SR Gen10 Driver for Windows Server 2022

The HPE Smart Array S100i SR Gen10 is a high-performance, PCIe-based storage controller designed for HPE ProLiant Gen10 servers. It provides a robust and reliable storage solution, supporting a wide range of storage configurations and offering advanced features such as RAID, caching, and secure encryption.

Overview of the Driver

To ensure seamless integration and optimal performance of the HPE Smart Array S100i SR Gen10 controller with Windows Server 2022, Hewlett Packard Enterprise (HPE) provides a specific driver. This driver enables the operating system to communicate effectively with the controller, facilitating the management and utilization of connected storage devices.

Key Features of the Driver

• Compatibility: Specifically designed for Windows Server 2022, ensuring full compatibility and support.
• Performance Optimization: Enhances the performance of the S100i SR Gen10 controller by providing efficient data transfer and storage management.
• RAID Support: Enables the configuration and management of RAID (Redundant Array of Independent Disks) settings directly from Windows Server 2022, improving data redundancy and system reliability.
• Management Tools: Integrates with HPE's management tools, allowing for comprehensive monitoring, configuration, and maintenance of the storage environment.

Benefits of Using the Driver

• Improved System Performance: By optimizing storage operations, the driver helps in achieving better overall system performance and responsiveness.
• Enhanced Data Protection: Supports advanced data protection features such as RAID, which helps safeguard data against loss due to disk failures.
• Simplified Management: Provides a straightforward way to manage and configure storage, reducing administrative overhead and complexity.

Installation and Updates

Installing or updating the driver for the HPE Smart Array S100i SR Gen10 on Windows Server 2022 involves a few straightforward steps:

1. Locate the Latest Driver: Visit the HPE Support website to find and download the latest driver for the S100i SR Gen10 controller compatible with Windows Server 2022.
2. Extract the Driver Package: Unzip or extract the downloaded driver package to a folder on your server.
3. Open Device Manager: Navigate to the Device Manager in Windows Server 2022.
4. Find the Controller: Locate the HPE Smart Array S100i SR Gen10 controller in the Device Manager under Disk Drives or SCSI Controllers.
5. Update Driver: Right-click on the controller, select "Update driver", and then choose to browse my computer for drivers. Point to the extracted driver package.
6. Complete the Installation: Follow the on-screen instructions to complete the driver installation.

Conclusion

The HPE Smart Array S100i SR Gen10 driver for Windows Server 2022 is a crucial component for ensuring that HPE ProLiant Gen10 servers with this storage controller can efficiently utilize their storage capabilities. By providing a compatible and feature-rich driver, HPE enables system administrators to leverage the full potential of their storage infrastructure, enhancing performance, reliability, and manageability. Regularly updating to the latest driver version is recommended to maintain optimal performance and to benefit from any enhancements or fixes provided by HPE.

Title: Solving the HPE Smart Array S100i SR Gen10 Driver Nightmare on Windows Server 2022

Published: April 24, 2026 Category: HPE / Windows Server Author: [Your Name]

Method B: HPE SSA Installer (Offline/Online)

The official HPE SSA for Windows can install the S100i driver as part of its setup. Download “HPE Smart Storage Administrator (SSA) for Windows Server 2022” – it includes the correct driver layer.

The Core Problem: No Drives Found During Installation

You boot from your Windows Server 2022 ISO (via iLO virtual media, USB, or DVD). The setup loads, but when you reach the "Where do you want to install Windows?" screen, the drive list is completely empty. You see no physical disks or logical RAID volumes.

This is not a hardware failure. It is a missing driver symptom. Windows Server 2022 has no native storport miniport driver for the S100i's PCI device ID (typically PCI\VEN_8086&DEV_A382 or similar).

The solution: Provide the driver during the OS installation or inject it afterward.

Step 2: Downloading the Correct Driver

HPE does not bundle the S100i driver inside the standard Windows Server 2022 ISO. You must download it from HPE’s Support Center. As of late 2024 / early 2025, here is the official location:

Driver Name: HPE Smart Array S100i Software RAID Driver for Windows Server 2022
Version Example: 6.2.2.240 (check HPE for latest)
File Format: Usually an .exe self-extracting driver package or a .zip with .inf files.

Method 3: Using HPE Image Assistant (Smart Update Manager)

For automated driver deployment across multiple servers:

1. Install HPE Image Assistant (formerly SUM) on Windows Server 2022.

2. Run the tool and baseline against your server.

3. Select the S100i driver component from the repository.

4. Apply the update and reboot.

How to Download the Driver

There are two primary methods to obtain the correct driver for Windows Server 2022 (x64). Inability to detect or configure RAID sets Limited

Issue 3: Blue screen (BSOD) after installing driver

Cause: Incompatible driver version or BIOS settings conflict.

Fix:

• Update server BIOS (System ROM) to the latest version.
• Ensure the S100i is enabled in BIOS → System Options → SATA Controller → choose "Smart Array S100i" instead of AHCI.
• Use only the driver version explicitly listed for Windows Server 2022 (not Server 2016 driver).