Skip to content

Huawei E5573 Drivers Windows 10 File

The Huawei E5573 is a plug-and-play device that generally does not require manual driver installation on Windows 10, as the drivers are either built-in or install automatically upon connection. How to Install Drivers

Direct USB Connection: Connect the device to your computer using a USB cable. Windows 10 should recognize it as a virtual CD drive.

AutoRun Setup: Open "This PC" or "My Computer." Double-click the drive labeled Huawei or Mobile Broadband. Run the AutoRun.exe or setup.exe file to install the connection manager and necessary drivers.

Manual Update: If the device isn't recognized, right-click the Start button and select Device Manager. Look for any "Unknown Device" under Other devices, right-click it, and select Update driver > Search automatically for drivers. Alternative: Official Software Tools

If the built-in installer fails, you can use official Huawei tools to manage drivers:

HUAWEI PC Manager: This is the recommended tool for updating and managing drivers for Huawei hardware.

HiSuite: While primarily for phones, this package includes general Huawei USB drivers that often resolve connection issues for MiFi devices.

DriverTools: A specific one-click utility for downloading and installing drivers on Windows 10/11. Connecting via Wi-Fi (No Drivers Needed)

You can bypass driver issues entirely by connecting wirelessly: Downloading Drivers | HUAWEI Support Global

Setting up the Huawei E5573 (a popular pocket Wi-Fi modem) on Windows 10 is usually straightforward because it is designed to be "Plug and Play." However, if your computer isn't recognizing the device when connected via USB, you may need to manually trigger the driver installation. 1. Built-in Auto-Installation (Preferred)

Most Huawei modems come with the drivers stored on the device itself. When you connect it to your PC, Windows should see it as a virtual CD drive. to your Windows 10 computer using a high-quality USB cable. File Explorer

(Windows Key + E) and look for a new drive named something like "Mobile Broadband" or "Huawei." Open that drive and look for a file named AutoRun.exe Right-click the file and select Run as Administrator

. Follow the prompts to install the Huawei Mobile Broadband software and drivers. 2. Manual Driver Installation

If the auto-installation doesn't start or the drive doesn't appear, you can try these methods: Using Windows Update: Windows 10 can often find the drivers automatically. Go to Settings > Update & Security > Windows Update Check for updates

. Check the "Optional updates" section if the modem still isn't working. Huawei PC Manager: If you are using a Huawei laptop, the HUAWEI PC Manager can automatically detect and update all related drivers. Official Driver Tools: You can download the DriverTools

package (v1.2.0.5 is compatible with Windows 10/11) from the Official Huawei Support Site 3. Troubleshooting "USB Not Recognized" If the device still isn't showing up in Device Manager: Check Device Manager: Right-click the Start button and select Device Manager

. Look for "Other devices" or "Modems" with a yellow exclamation mark. Scan for Changes: Action > Scan for hardware changes to force Windows to look for the connected device. Try Another Port:

Ensure you are using a direct USB port on your motherboard rather than a USB hub, which can sometimes lack the power to run the modem properly. HUAWEI Global 4. Using the Web Interface (No Drivers Needed)

If you only need to change settings (like your Wi-Fi password), you don't actually need drivers. You can manage the device wirelessly: Connect your PC to the Open a browser and type 192.168.8.1 into the address bar. Log in (default credentials are usually unless changed) to manage your connection.

Are you having trouble with the USB connection specifically, or are you trying to update the device's firmware for better performance? Downloading Drivers | HUAWEI Support Global

The Huawei E5573 (including popular variants like the ) is a legacy 4G LTE mobile Wi-Fi hotspot that generally functions as a plug-and-play device on Windows 10. Driver & Setup Overview

On modern Windows 10 builds, you typically do not need to hunt for manual driver installers.

Plug-and-Play (HiLink): When connected via USB, the device usually emulates a CD drive containing the "MobileBroadband" setup. Running this installer automatically configures the necessary NDIS (Network Device Interface Specification) drivers.

Web Interface: Most users skip USB drivers entirely and manage the device via Wi-Fi by visiting 192.168.8.1 in a browser. This is the most stable way to use the device on Windows 10. Common Issues & Fixes

If the device is not recognized by Windows 10, it is usually due to the OS failing to switch the device from "Mass Storage Mode" to "Modem Mode."

Manual Driver Updates: If the device appears in Device Manager with a yellow exclamation mark (often under "Other Devices" as "Huawei Mobile"), you may need the Huawei HiSuite software. Installing HiSuite is the most reliable way to force-install the correct signed drivers for Windows 10.

COM Port Issues: For advanced users trying to "unbrick" or change firmware, Windows 10 often requires a specific "Huawei Port" driver to recognize the FC - PC UI Interface.

Power Management: A common "review" complaint is the device disconnecting. This is often fixed by going to Device Manager > Network Adapters > Huawei Mobile Connect, right-clicking Properties, and disabling "Allow the computer to turn off this device to save power." Verdict As of 2026, the

is an aging but capable device. While it was originally designed for Windows 7/8, its reliance on standard NDIS protocols makes it compatible with Windows 10 without needing third-party driver packs, provided you use the Huawei HiLink web interface or HiSuite for the initial handshake.

Most Huawei E5573 models come with a small amount of internal storage containing a "virtual CD drive." Connect your device via a high-quality USB cable. File Explorer and look for a drive labeled "Mobile WiFi" or similar. Right-click AutoRun.exe and select Run as Administrator 2. Manual Driver Installation huawei e5573 drivers windows 10

If the device doesn't auto-install, you can use the official HUAWEI Mobile USB Driver Download the driver package (often labeled Huawei_Mobile_Driver_v1.0.exe 5.05.01.00 Right-click the setup file and choose Run as Administrator Follow the wizard: Click Restart your computer once the "Finish" button appears. 3. Troubleshooting "Device Not Recognized"

If your Windows 10 PC still shows a "Code 10" or "Unknown Device" error in Device Manager: The FC Serial Fix

: Sometimes you need to manually copy specific driver files. In some advanced cases, users have successfully fixed detection issues by copying files like FCSerialDrv C:\Windows\SysWOW64 Registry Patch : Some unlocking and driver tools include a

file specifically designed to fix "Error Code 10" on Windows 10. HUAWEI PC Manager : For Huawei laptop users, the official HUAWEI PC Manager

tool can automatically scan and update these drivers under the "Optimization" or "Drivers" section. 4. Pro Tip: Use the Web Interface

If you can't get the USB connection to work, you can skip drivers entirely by connecting via Wi-Fi.

Search for the device's Wi-Fi network and connect using the password under the battery cover. Open your browser and go to 192.168.8.1 (the default IP).

Log in to manage settings, check data usage, and send SMS directly from the web dashboard. Still stuck?

If your PC is completely ignoring the device, try a different USB port (preferably USB 2.0) or check if your cable is "charge-only" instead of a data cable. What worked for you? Let us know in the comments! Need more help

with specific firmware updates or unlocking your E5573 for other networks? Let me know your exact model number (like E5573s-320 or E5573cs-322). Huawei Modem not working in Win 10

Title: Overcoming Driver Hurdles: The Huawei E5573 and Windows 10

Introduction The Huawei E5573 is a popular portable 4G LTE mobile hotspot (MiFi) that allows users to create a Wi-Fi network from a cellular data connection. While primarily designed for wireless connections, many users attempt to connect the device directly to a Windows 10 PC via USB to achieve a tethered, low-latency internet connection or to access the device’s administrative interface. However, a common frustration arises when Windows 10 fails to recognize the device, leading to the search for “Huawei E5573 drivers for Windows 10.” This essay explores the nature of the driver issue, the correct approach to solving it, and best practices for maintaining a stable connection.

The Misconception of Drivers Unlike older USB modems that required complex manual driver installations, the Huawei E5573 is designed as a Network Interface Device (NDIS). In theory, Windows 10 should automatically install the required drivers via Windows Update when the device is plugged in. The challenge begins when Windows fails to automatically identify the device, listing it instead as an “Unknown USB Device” or a generic serial port. This usually occurs due to corrupted Windows Update caches, the USB port delivering insufficient power (common on older laptops), or interference from previously installed modem software.

The Primary Solution: Windows Update and NDIS For the vast majority of users, Windows 10 already contains the necessary drivers under the Remote NDIS based Internet Sharing Device class. When the E5573 is set to “USB Tethering” mode (enabled in its web interface), Windows 10 should automatically load this driver. If it does not, the most reliable solution is not to seek a standalone driver file from third-party websites—which often carry malware—but to force Windows Update to search for the driver. This is done by navigating to Device Manager > Right-click the unknown device > Update driver > Search automatically for drivers. Windows 10 will then download the official Microsoft-supplied NDIS driver, and the E5573 will appear as a standard Ethernet connection under Network Connections.

Alternative Approaches and Legacy Tools In cases where Windows Update fails (e.g., offline systems or enterprise-managed PCs), users may turn to Huawei’s proprietary dashboard software, such as Mobile Partner or the HiLink app. These packages contain legacy drivers compatible with Windows 10. However, users must download these only from Huawei’s official support pages or reputable archives, as many third-party “driver download” sites bundle adware. Another simple workaround is to bypass drivers entirely: since the Huawei E5573 is a Wi-Fi hotspot, connecting via standard wireless LAN requires no drivers at all, making USB tethering a secondary, optional feature.

Troubleshooting Common Errors When the device remains unrecognized, several steps resolve the issue:

  1. Mode switching: Ensure the E5573 is in “USB tethering” mode, not “Charge only” (configurable at 192.168.8.1 in a browser).
  2. Cable integrity: Use a high-quality data USB cable; cheap charge-only cables lack data pins.
  3. Driver signature enforcement: Temporarily disable Windows 10’s driver signature enforcement if installing an older Huawei driver (e.g., from 2016).
  4. Removing ghost drivers: Use Show or Hide Updates troubleshooter to block automatic reinstallation of a broken driver.

Conclusion While the Huawei E5573 is not impossible to use with Windows 10, the search for “drivers” is often a red herring. Microsoft’s built-in NDIS driver solves almost all cases, provided the device is correctly configured. Users should avoid third-party driver download sites and instead rely on Windows Update or official Huawei tools. Ultimately, for straightforward use, Wi-Fi connectivity remains the most driver-free and reliable method. However, for those requiring a wired USB connection, understanding the Remote NDIS framework transforms a frustrating hunt into a manageable technical task.

The rain drummed against the window of Mark’s small apartment, a rhythmic tapping that matched the frantic clicking of his mouse. It was 2:00 AM, and the deadline for his final architecture project was looming like a shadow. He had the renders, the blueprints, and the soul of a masterpiece—all trapped on a laptop that refused to acknowledge the existence of the internet.

His home Wi-Fi had breathed its last breath three hours ago, a casualty of the storm. Mark’s only hope was a small, dusty plastic rectangle sitting on his desk: the Huawei E5573 4G Hotspot

"Come on, old friend," Mark whispered, plugging the device into his Windows 10 machine.

He expected the familiar chime of a successful USB connection. Instead, he got the dreaded silence of a "Device Not Recognized" error. The laptop saw a piece of plastic; it didn’t see a gateway to the world. The drivers were missing, lost in some digital purgatory between the old era of Windows 7 and the strict architecture of Windows 10.

Mark began his descent into the rabbit hole. He navigated through forums archived in 2015, where users spoke in the cryptic tongue of "COM ports" and "Device Manager yellow triangles." He downloaded "Huawei_Driver_v5.0," only for the installer to hang at 99%, mocking him.

He tried the "MobileBroadband" manual update. He tried disabling driver signature enforcement, a move that felt like performing open-heart surgery on his operating system. Each time he restarted, the little green light on the E5573 would blink—once, twice—and then fade into a steady, accusing red.

The clock struck 3:30 AM. Panic was no longer a feeling; it was a physical weight. He found a stray post on page eight of a search result, a comment from a user named TechNomad92 . It wasn't a link to a driver, but a set of instructions:

"Windows 10 hates the auto-run. Force the 'Remote NDIS based Internet Sharing Device' through the Network Adapters menu. Don't let it search; tell it what it is." With trembling fingers, Mark followed the path.

Update Driver > Browse my computer > Let me pick from a list.

He scrolled past the generic options until he found it. He clicked "Next."

The computer paused. The fan whirred into a high-pitched scream. And then, a sound sweeter than any symphony: the of a successful connection.

The red light on the Huawei E5573 turned a brilliant, steady blue. The "No Internet" icon in the corner of his screen transformed into the bars of a cellular signal. Mark didn't waste a second. He hit "Upload," watching the progress bar crawl across the screen as the sun began to peek through the gray clouds. The Huawei E5573 is a plug-and-play device that

When the "Submission Successful" message finally appeared, Mark leaned back, his eyes burning but his heart light. He looked at the little Huawei puck. It was outdated, finicky, and a nightmare to install—but tonight, it was the hero of the story. actual step-by-step technical guide

to installing those drivers on Windows 10, or are you looking for a specific version of the firmware?

Huawei E5573 Drivers for Windows 10: Complete Guide Huawei E5573 Go to product viewer dialog for this item.

is a highly popular 4G Mobile Wi-Fi (MiFi) hotspot used globally for high-speed mobile internet. To ensure a stable connection when tethering via USB to a laptop or desktop, having the correct Huawei E5573 drivers for Windows 10 is essential.

This guide provides the official methods to download, install, and troubleshoot your Huawei E5573 connection. 1. Official Download & Installation Methods

The most reliable way to get your drivers is directly from the manufacturer or through official software suites. A. Automatic Installation (Virtual CD-ROM) When you connect the

to your computer via a USB cable, it often appears as a virtual CD-ROM drive. Connect the to a USB port on your Windows 10 computer. Open This PC or File Explorer. Look for a drive named MobileWiFi.

Double-click the drive and run the AutoRun.exe or Setup.exe file.

Follow the on-screen instructions to install the drivers and the Huawei HiLink dashboard. B. Using HUAWEI PC Manager

Huawei recommends using their management tool to keep all drivers updated automatically.

Download: You can download the tool from the HUAWEI Support Global page.

How to use: Open the manager, go to Optimization > Drivers, and click CHECK to find and update any missing mobile broadband drivers. C. Manual Driver Update via Device Manager

If the automatic setup fails, you can force Windows to find the drivers manually. Downloading Drivers | HUAWEI Support Global

Connect your device to your PC using a high-quality USB cable.

A virtual CD-ROM drive should appear in "This PC." Open it and run AutoRun.exe to install the Huawei Dashboard and necessary drivers. Web Interface: If it doesn't auto-launch, open your browser and go to 192.168.8.1 to manage your connection settings. 2. Manual Driver Update via Device Manager

If your computer detects the device but can't "talk" to it, you may need to update the drivers manually as suggested by this guide on manual driver installation Right-click the button and select Device Manager

Look for "Other Devices" or "Network Adapters" with a yellow exclamation mark (likely labeled "HUAWEI Mobile"). Right-click the device and select Update driver Search automatically for drivers . If Windows fails to find them, you can also check for Optional Updates Windows Update advanced settings 3. Troubleshooting Connection Issues If you've installed the drivers but still can't connect: Check the SIM:

Ensure the SIM card is properly seated and the device is powered on. Wi-Fi Alternative:

If USB drivers are failing, you can connect via Wi-Fi. Find your SSID and Password

on the inside of the back cover, then connect through your Windows Wi-Fi menu as detailed here Reset the Device:

If the settings are scrambled, you can perform a factory reset by pressing the small Reset button under the back cover with a pin for a few seconds as shown in this tutorial Quick Specs Micro USB, Wi-Fi 150 Mbps (LTE) Windows Support Windows 7, 8, 8.1, 10, 11

Is your device currently showing up in Device Manager with an error code, or is it not appearing at all?

Getting your Huawei E5573 Go to product viewer dialog for this item.

Mobile Wi-Fi to play nice with Windows 10 is usually a plug-and-play process, but driver hiccups can happen. Here is a comprehensive guide to installing the drivers and troubleshooting connection issues. 1. The Automatic Method (Plug & Play) Most modern versions of Windows 10 will recognize the Huawei E5573 Go to product viewer dialog for this item. immediately upon connection.

Connect via USB: Use a high-quality micro-USB cable to connect the device to your PC.

Virtual CD Drive: Open File Explorer. You may see a new drive appear as a "Virtual CD Drive" or "Mobile Broadband."

Run Setup: Double-click the AutoRun.exe or Setup.exe file within that drive to install the native Huawei management software (HiLink), which includes the necessary drivers. 2. Using Windows Device Manager

If the device shows up as "Unknown" or doesn't function, you can force Windows to search for drivers.

Open Device Manager: Right-click the Start button and select Device Manager. Title: Overcoming Driver Hurdles: The Huawei E5573 and

Locate the Device: Look for "Other Devices" or "Ports (COM & LPT)." You might see "HUAWEI Mobile Connect."

Update Driver: Right-click the entry and select Update driver.

Search Automatically: Choose Search automatically for drivers. Windows will attempt to pull the official Huawei drivers from its online database. 3. Official Huawei PC Manager

Huawei recommends using their proprietary management tool to keep drivers updated.

Download: Visit the official Huawei Support Global page to download Huawei PC Manager.

Scan: Open the app, go to Optimization > Drivers, and click Check. Install: If the Go to product viewer dialog for this item.

drivers are missing or outdated, the software will prompt you to install the official versions. 4. Manual Driver Installation (The "Old School" Way) If you are using an older Go to product viewer dialog for this item.

model or a specific firmware that doesn't trigger the auto-installer:

Download "Huawei USB Drivers": Search for the standalone "Huawei Mobile Phones & Modem USB Driver" package (often v1.0.23 or newer).

Extract and Install: Unzip the folder and run DriverSetup.exe.

Restart: Always restart your PC after a manual driver installation to ensure the Windows registry recognizes the new COM ports. 5. Troubleshooting Common Issues

Device not detected: Try a different USB port (preferably a USB 2.0 port if available, as some older modems struggle with USB 3.0/3.1 controllers).

Incompatible Drivers: If you have old drivers causing errors, right-click the device in Device Manager and select Uninstall device, checking the box to Delete the driver software for this device. Then, reconnect to start fresh.

Driver Signature Enforcement: Windows 10 sometimes blocks older drivers. If the installation fails, you may need to disable Driver Signature Enforcement via the Advanced Startup menu.

Pro Tip: If the USB connection remains stubborn, you can always connect via Wi-Fi. Find the SSID and Wi-Fi Password located on the sticker inside the battery compartment. Update drivers through Device Manager in Windows

Method 2: Automatic Installation via Virtual CD

If Windows 10 does not automatically find the driver, the Huawei E5573 has a backup installer built directly into the device’s memory.

  1. Connect the Device: Plug the E5573 into your PC.
  2. Open File Explorer: Go to This PC.
  3. Locate the Virtual Drive: You will see a CD/DVD drive icon, usually named "HiLink" or "E5573".
  4. Run the Installer:
    • Double-click the drive icon.
    • If an "AutoPlay" window pops up, select "Run Autorun.exe".
    • If nothing happens, open the drive folder and double-click Autorun.exe.
  5. Follow Prompts: A setup wizard will appear. Click "Next" through the installation process.
  6. Finish: Once finished, the dashboard should launch automatically, and you will have internet access via USB.

Issue 2: USB Tethering Works but Drops After a Few Minutes

Cause: Windows 10’s USB Selective Suspend power setting cuts power to the E5573.

Fix:

  1. Go to Control Panel → Power Options.
  2. Click Change plan settings next to your active plan.
  3. Click Change advanced power settings.
  4. Scroll to USB settings → USB selective suspend setting.
  5. Set it to Disabled.
  6. Click Apply → OK.

Q4: I installed the drivers, but still no internet. What now?

A: Check your APN settings. Go to 192.168.8.1 → Settings → Dial-up → Profile Management. Ensure the correct APN (e.g., internet, fast.t-mobile.com, etc.) is entered and selected.

Method B: Manual Driver Installation via Device Manager

This method works even when the automatic installer fails.

  1. Download the driver package from a trusted source (use caution). The most reliable source is the Huawei official support page for your specific sub-model (e.g., E5573s-806, E5573c-609). Alternatively, use the universal Huawei Mobile Broadband Driver for Windows 10 (version 22.001.05.00.03 or newer).
  2. Extract the downloaded .zip file to a folder on your desktop (e.g., C:\HuaweiDrivers).
  3. Open Device Manager (right-click Start button → Device Manager).
  4. Locate the unrecognized device. It will likely appear as:
    • Other devices → Unknown device (with a yellow triangle)
    • Other devices → Huawei Mobile Broadband
  5. Right-click the device → Update driver.
  6. Select Browse my computer for drivers.
  7. Click Browse and navigate to the folder where you extracted the drivers (look for a subfolder named Drivers or Win10).
  8. Check the box Include subfolders.
  9. Click Next.
  10. Windows will now install the NDIS driver. You may see a security warning – click Install anyway.

After completion, the device should reappear under Network adapters as Huawei NDIS Internet Device.

Part 1: Do You Really Need Separate Drivers?

Before diving into downloads, it’s important to understand how Windows 10 interacts with the E5573.

The E5573 is designed as a self-contained router. The most reliable way to use it with Windows 10 is via Wi-Fi. If you connect wirelessly (SSID: usually "HUAWEI-xxxxx"), no drivers are required—Windows will see it as any other Wi-Fi network.

Why, then, do people search for "Huawei E5573 drivers Windows 10"?

The answer is USB tethering. When you connect the E5573 to a Windows 10 PC via a USB cable, you expect the PC to use the hotspot’s cellular data connection. For this to work, Windows needs specific NDIS (Network Driver Interface Specification) drivers to treat the USB connection as a network adapter.

Without the correct drivers:

Thus, drivers are only required for USB tethering. For Wi-Fi, they are unnecessary.

When you need drivers

Problem 2: E5573 Only Charges, No Network Adapter Appears

Cause: The E5573 may be stuck in "charge-only mode" (common with older firmware).

Fix: