Jump to content
NHL'94 Forums

I !!install!! Download Fixed Driver Cutting Plotter Jinka 1351 May 2026

The Jinka 1351 (often referred to as the JK1351 or MH1351) is a widely used entry-level vinyl cutter favored for its large 126cm cutting width and high value-for-price. While it is praised for its robust aluminum build and accuracy when configured correctly, users frequently encounter steep learning curves regarding driver installation and port configuration. Driver & Software Performance

Installing the "fixed" or updated driver is often the turning point for this machine's performance.

Precision Gains: Users report that installing the correct version (such as v2.4 for Windows 10) eliminates common issues like "stuttering" text curves and jagged edges.

Software Compatibility: The 1351 is compatible with major design software including CorelDraw, Adobe Illustrator, and Artcut. Specialized plug-ins like PlotCalc for JinKa allow for direct output from CorelDraw.

Fixed Driver Benefits: Updated drivers enable better control over cutting speed ( ) and force (

), essential for materials ranging from thin foils to car wraps. Key Technical Specs & Features Software for JinKa XE-1351 plotter - PlotCalc

Once upon a time, my Jinka 1351 cutting plotter was nothing more than a giant paperweight. Every time I tried to send a design, it either did nothing or cut random zig-zags that looked like a toddler’s drawing. The culprit? A broken or missing driver. Here is how I finally fixed it and got back to work: 1. Finding the "Magic" File

The drivers that came on the old CD were outdated and wouldn't run on my modern Windows setup. I had to hunt for a fixed driver specifically for the Jinka 1351 . I found reliable links on community pages like , which host the updated setup files. 2. The Clean Installation Before installing the new driver, I disconnected the USB cable

from the computer. If the cable is plugged in during the install, Windows sometimes tries to "help" by installing a generic driver that doesn't actually work. I extracted the file using

and waited for the "Installation Complete" message before plugging the plotter back in. Driver Jinka 1351 28 - Facebook i download fixed driver cutting plotter jinka 1351

Core Feature:

Key Capabilities Enabled by the Driver:

"Fixed" Driver Context: If you specifically downloaded a "fixed" driver, the feature usually implies:

To download and install the "fixed" or updated driver for your Jinka 1351 cutting plotter, follow this guide to ensure a clean installation and proper communication between your PC and the machine. 1. Download the Correct Driver

Always use verified sources to avoid corrupted files that cause connection errors.

Official Downloads: Visit Jinka Indonesia to find specific drivers for the XL PRO 1351 (Only Cut) or other 1351 variants.

Version Check: Look for Jinka_1351_Driver_v2.4_Win10_x64.zip (or similar) if you are on a modern Windows 10 or 11 system.

Specific Software: If you use CorelDRAW, you may also need the PlotCalc plugin specifically for the XE-1351 model. 2. Prepare Your System for Installation

Before installing the new driver, clear out any old configurations to prevent COM port conflicts. The Jinka 1351 (often referred to as the

Unplug Devices: Disconnect all other USB devices like scanners or other plotters. Uninstall Old Drivers: Right-click Start > Device Manager. Expand Ports (COM & LPT).

Right-click any "USB Serial Port" or "Plotter Controller" and select Uninstall, ensuring you check "Delete the driver software for this device". Reboot: Restart your computer after removal. 3. Install the "Fixed" Driver

Extract the File: Use a tool like WinRAR or 7-Zip to extract the downloaded .zip file.

Run as Administrator: Right-click setup.exe and select Run as administrator to avoid registry permission errors.

Manual Port Assignment: During setup, choose Manual Setup instead of Auto-Detect. Manually assign the device to COM3 (or COM2) to avoid conflicts with Bluetooth adapters.

Disable Signature Verification (If needed): For some Chinese plotter drivers on Windows 10/11, you may need to restart Windows in "Disable Driver Signature Enforcement" mode to allow the installation. 4. Software Connection Settings

Once the driver is installed, configure your cutting software (like SignMaster, Artcut, or Flexi) to recognize the machine:

Connection Method: Select Direct COM Port or Direct USB Port depending on your cable.

Port Settings: In your software's "Vinyl Spooler" or "Setup" menu, ensure the following match your Device Manager settings: Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None (or Hardware) Troubleshooting Tips Communication Bridge: The primary feature of this driver

Device Not Found: Try different USB ports on your PC if the machine isn't recognized after installation.

Incorrect Cutting: If the machine "mashes" the adhesive or cuts in random places, double-check that your COM port in the software exactly matches the one assigned in Windows Device Manager.

Manual Reference: For detailed cabling and blade setup, refer to the Jinka Operating Instructions.

Are you using a specific cutting software like SignMaster or CorelDRAW for your designs? Driver Jinka 1351 Download - Facebook

Part 5: The Absolute Last Resort – The "Virtual COM Port" Fixed Driver Alternative

If none of the above works, there is a nuclear option: Use a USB-to-Serial adapter with an FTDI chip and bypass the plotter's internal USB controller.

The "Legacy OS Virtual Machine" Solution

If no fixed driver works, install Windows 7 on a Virtual Machine (VirtualBox or VMware). Pass the USB device through to the VM. Windows 7 has zero signature enforcement. Inside the VM, the original CD driver will work perfectly. You then share a folder to transfer cut files.

The Final Verdict: Which "Fixed Driver" Should You Download?

To save you time, here is the clear recommendation based on your Windows version:

| Your Windows Version | Recommended "Fixed Driver" | Success Rate | | :--- | :--- | :--- | | Windows 10 (21H2 or newer) | CH340 USB-to-Serial v3.8 (Official signed) | 95% | | Windows 11 (22H2+) | Jinka 1351 HID Patched v2 (Community) + Disable Signature | 80% | | Windows 7/8.1 | Original CD driver (Not broken for you) | 100% |

The #1 Mistake: Installing the Driver Wrong

Most users fail because they download the driver but do not configure the cutting software to use it. A "fixed driver" is useless if your software speaks a different language.

After installing the fixed driver, you must set up your cutting software (SignMaster, ArtCut, Flexi, VinylMaster):

×
×
  • Create New...