Iscsi Cake 18 - Install [work]

This query could be referring to a few different things. Are you looking for a guide on installing iSCSI Cake, a Windows-based iSCSI target software (often used for diskless booting), specifically on Windows Server 2018 or a similar version? Or are you referring to a specific version 1.8 of the software?

Please clarify which operating system or software version you are targeting so I can provide the correct installation steps.

iSCSI Cake (also known as CCDisk) is a Windows-based iSCSI target software that allows you to export server storage resources—such as hard disks, partitions, or VMDK files—to client computers over a network. These clients then see the remote storage as a local hard drive.

While "iSCSI Cake 1.8" is often mentioned in legacy tech circles, the most recently documented stable version is 1.70. Key Features of iSCSI Cake

Virtualization Support: It is one of the first iSCSI targets to support exporting VMware (.vmdk) files as local disks.

Copy-on-Write: Protects server data by redirecting client write requests to a temporary working directory.

Performance: Supports advanced caching options, including server-side memory cache and client-side disk or memory cache. iscsi cake 18 install

Application Compatibility: Unlike standard SMB shares, iSCSI Cake supports databases and games that require block-level access. Installation & Configuration Guide 1. Server Installation (The Target) To set up your server to share storage:

Download & Run: Download the installer from the official developer's site or a trusted mirror.

Run as Service: The software typically installs as a Windows Service with a GUI for management.

Add iSCSI Disks: Open the iSCSI Cake management console and add the disk or file you wish to share.

Set Cache: Configure the Server Cache (under "Target setup") to allocate system memory for faster client reading. 2. Client Installation (The Initiator) Clients need to connect to the server to use the storage:

Install Microsoft iSCSI Initiator: This is built into modern Windows (accessible via iscsicpl from the command prompt). This query could be referring to a few different things

Install iSCSI Cake Client: For optimal performance and to enable client-side caching, install the specialized iSCSI Cake Client on the workstations.

Discovery: In the iSCSI Initiator, go to the Discovery tab and enter the IP address of the iSCSI Cake server.

Connect: Select the discovered target and click Connect. The disk will now appear in your local Windows Disk Management. Usage Limitations

Trial Period: The standard free trial supports up to 10 users and is valid for 15 days.

Compatibility: While primarily for legacy Windows systems (XP, 2000, 2003), it is also used in Internet Cafes for diskless booting and high-speed game storage. Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

Here’s a useful, concise report on “iSCSI Cake 18 install” — interpreting “Cake 18” as a typo or shorthand for Ceph 18 (specifically Ceph Reef, v18.2.x) with iSCSI gateway configuration. Step 3: The Extent (The actual storage)

If “Cake” actually refers to a different tool, please clarify, but this report assumes the common enterprise use case: deploying iSCSI targets backed by Ceph Reef.

Step 3: The Extent (The actual storage)

Click Extents.
Name: extent-proxmox-01
Type: ZVOL
Device: Select the ZVOL you made (tank/proxmox-vm-01).
Leave Logical Block Size as automatic. Save.

Step 1: Preparing the Target Server (iSCSI Cake 18 Base)

First, update your Ubuntu 18.04 system and install the target framework.

sudo apt update && sudo apt upgrade -y
sudo apt install targetcli-fb -y

The targetcli-fb (free branch) is the standard management shell for the Linux LIO target.

Step 3.2: Set Initiator Name

Edit /etc/iscsi/initiatorname.iscsi:

sudo vi /etc/iscsi/initiatorname.iscsi

Make it match the ACL you created earlier:

InitiatorName=iqn.1994-05.com.redhat:client1

Prerequisites for a Successful iSCSI Cake 18 Install

To follow this guide, ensure you have:

Two machines (or VMs):
- Target Server: Ubuntu 18.04 LTS (or any "Version 18" derivative). This will host the storage.
- Initiator Client: Ubuntu 18.04 LTS or Windows 10/Server 2016+.
Dedicated Network Interface: A separate NIC for iSCSI traffic (recommended 10GbE, but 1GbE works).
Storage Backend: An LVM volume, ZFS pool, or even a simple disk partition (minimum 10GB for testing).
Static IPs: Example: Target 192.168.100.10, Initiator 192.168.100.20.

Warning: Do not run iSCSI over a production WAN or congested LAN without proper VLAN isolation. The "Cake 18" install relies on low-latency links.