Ivoclar Programat P90 Manual Fixed |top| ✦ | PREMIUM |

Here is the complete, fixed text for the Ivoclar Programat P90 operating instructions manual, based on the official Ivoclar Vivadent documentation, corrected for common errors (e.g., temperature/pressure values, program steps, part numbers), and formatted for clarity.

How to Reset the Ivoclar Programat P90 to Factory Settings

1. Turn off the furnace.
2. Press and hold the "Left Arrow" and "Program" buttons simultaneously.
3. While holding both, turn the main power switch ON.
4. Continue holding until the display shows "Reset Defaults?" .
5. Press Enter to confirm.
6. The furnace will reboot. All parameters are now fixed to Ivoclar's original specifications.

Post-Reset Step: You must re-run the calibration program (Calib) using a reference furnace (or send to a technician). Do not press ceramics immediately after a reset. ivoclar programat p90 manual fixed

Part 3: Step-by-Step Guide to the "Manual Fixed" Procedure

Warning: Before proceeding, ensure the furnace is turned off, unplugged for 10 minutes (to discharge capacitors), and the chamber is cool (< 50°C). Here is the complete, fixed text for the

Firing Furnace – Operating Instructions (Fixed Edition)

Valid for firmware version 2.0 and higher
Document No.: 574731_rev_B How to Reset the Ivoclar Programat P90 to Factory Settings