Keyread V2.0 Mitsubishi New!

It sounds like you're asking about KeyRead V2.0 for Mitsubishi vehicles—likely referring to a tool used for reading immobilizer data, PIN codes, or transponder keys (common in automotive locksmithing or diagnostic work).

If you're looking for a "good post" (a helpful forum thread or guide), here's a quick summary of what makes a good KeyRead V2.0 + Mitsubishi post:

What a good post usually includes:

1. Vehicle compatibility – Which Mitsubishi models (e.g., Outlander, Lancer, Pajero, ASX) and years (often 2000–2015+).
2. Hardware/software setup – Which programmer (e.g., KeyRead V2.0 device, sometimes alongside VVDI2, Tango, or AVDI) and firmware version.
3. Step-by-step procedure – Reading the immobilizer box (usually NEC MCU or 93C56 EEPROM), often via OBDII or direct PCB connection.
4. PIN code extraction – Where to find the 4- or 5-digit PIN in the dump.
5. Common issues & fixes – e.g., "KeyRead V2.0 fails to connect on 2012 Outlander – solution: update firmware or use external power."
6. Success/failure reports – Real-world feedback from locksmiths.

Where to find such good posts:

• Digital-kaos.co.uk (locksmith forum) – Search: KeyRead V2.0 Mitsubishi
• MHH Auto (mhhauto.com) – Many diagnostic tool discussions.
• Reddit – r/Locksmith or r/CarHacking – but less structured.
• YouTube – Channels like KeyProg, Locksmith Hub – often show live usage.

Important note:
KeyRead V2.0 is an older tool. For newer Mitsubishis (post ~2018 with G防盗 or Smart Key), you may need tools like Autel IM608, Xhorse VVDI Key Tool Plus, or SmartPro. keyread v2.0 mitsubishi

If you meant something else by "keyread v2.0" (e.g., a specific software or clone device), let me know and I can narrow it down.

What is Keyread V2.0 Mitsubishi?

Keyread V2.0 is a specialized diagnostic and key programming tool designed specifically for Mitsubishi vehicles (including some older Nissan/Daihatsu platforms that share immobilizer systems). It connects via OBDII and focuses on reading PIN codes, programming transponder keys, and resetting immobilizer data.

Step-by-Step: Using KeyRead V2.0 on a Mitsubishi (All-Keys-Lost Example)

Here’s a typical workflow for a locksmith using KeyRead V2.0:

Step 1: Hardware Connection Connect the KeyRead V2.0 hardware interface (or compatible pass-through device) to the vehicle’s OBD-II port and to a Windows laptop running the KeyRead software. It sounds like you're asking about KeyRead V2

Step 2: Select Vehicle Model Launch the software → Choose Mitsubishi → Select the exact model and year (e.g., "Mitsubishi Outlander 2015").

Step 3: Read Immobilizer Data Click “Read PIN/Immo Data.” The software initiates a handshake with the immobilizer unit. For OBD-readable models, the PIN appears on screen. For older models, you may be prompted to remove the immobilizer box and read the eeprom (instructions with photos are included).

Step 4: Prepare New Key Insert a blank transponder key (e.g., ID47 chip for newer Mitsubishi) into the KeyRead programmer or a compatible programmer like the Xhorse VVDI Key Tool.

Step 5: Program the Key Select “Program Key” → Enter the extracted PIN → Follow the on-screen prompts to insert and turn the key in the ignition. The system confirms "Key Added Successfully." What a good post usually includes:

Step 6: Test Start the engine with the new key. Test remote locking if equipped.

Compatible Models: A Practical List

KeyRead V2.0 is verified to work on the following Mitsubishi platforms (global specifications, including European and Asian markets):

• Lancer / Lancer Evolution (2003–2017) – Immobox read.
• Outlander (2003–2022) – Both standard blade and Smart KOS.
• ASX / RVR (2010–2024) – ETACS pin retrieval.
• Pajero / Montero (2006–2021) – 93C86 eeprom support.
• Mirage / Space Star (2012–2024) – Smart key AKL.
• Colt (2004–2013) – 93C56 immobox.
• Delica D:5 (2007–2023) – Full smart box support.
• Eclipse Cross (2018–2024) – Real-time crypto bypass.

5. Standalone or PC Integrated

The V2.0 hardware works as a bridge. You can use it with the dedicated PC software (for detailed eeprom analysis) or with certain key programmers that have integrated KeyRead drivers (e.g., Lonsdor, VVDI, or Autel IM608 with the XP400 Pro).