Lg Ce0560 Wireless Adapter Driver ❲BEST❳
is not a standalone product model number, but rather a regulatory mark found on the LG AN-WF100
Wi-Fi USB Dongle. This adapter was originally designed to provide wireless connectivity for LG Smart TVs from the 2010–2011 era. Drivers for Windows PC
While LG does not provide official PC drivers for this TV accessory, you can use it on a Windows computer by utilizing its internal Broadcom chipset and a compatible driver from another manufacturer. Download Alternative Driver Netgear WNDA3100v2 driver Installation
Run the installer and close the "Netgear Genie" setup window when it asks to plug in the device.
Connect the LG adapter to your PC's USB port. It will likely appear as an "Unknown Remote Download Wireless Adapter" in Device Manager. Manual Update Device Manager , right-click the unknown device, and select Update Driver "Browse my computer for drivers"
"Let me pick from a list of available drivers on my computer" Network adapters as the manufacturer, and select the Netgear WNDA3100v2 N600 Wireless Dual Band USB Adapter
Accept the compatibility warning to finish the installation. Official LG Support for TVs
If you are using this adapter with a compatible LG TV (e.g., models ending in ) and it isn't working, follow these troubleshooting steps: Plug-and-Play
: Ensure the dongle is fully inserted into the TV's USB port. The LED indicator should be visible. TV Firmware : Update your TV's software via the LG Software & Drivers Support Page by entering your TV's model number , not the adapter number. Compatibility
: This adapter is specifically for select legacy models; newer LG TVs (post-2012) typically use the or have built-in Wi-Fi.
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
The LG CE0560 is a regulatory marking found on the LG AN-WF100 Wi-Fi USB Dongle, a wireless adapter primarily designed to add internet connectivity to select 2010–2012 LG Smart TVs. While it is a plug-and-play device for TVs, many users repurpose it for Windows PCs, which requires specific drivers. LG AN-WF100 (CE0560) Product Overview
The adapter enables wireless LAN for broadband and DLNA features on compatible displays. Hardware Interface: USB 2.0. Standards: Supports IEEE 802.11a/b/g/n protocols. Speed: Offers data transfer rates up to 300 Mbps (Wi-Fi 4). Security: Supports 64/128-bit WEP, WPA, WPA2, and WPS.
Compatibility: Works with 2011 and 2012 LG Smart TVs and 2010 models with NetCast. Driver Installation for Windows PC
The adapter uses a Broadcom chipset, which is why it is often recognized as an "unknown" device on modern PCs. To use it on Windows 10 or 11, follow these steps:
Download Compatible Driver: The Netgear WNDA3100v2 driver is widely cited as compatible with this specific hardware. You can find it on official support sites like Netgear Support. Manual Update:
Open Device Manager and find the device (may appear as "Remote Download Wireless Adapter").
Right-click it and select Update Driver > Browse my computer for drivers.
Select Let me pick from a list of available drivers on my computer.
Choose Network adapters, select Netgear as the manufacturer, and pick the Netgear WNDA3100v2 N600 model.
Ignore Warnings: You may receive a compatibility warning; clicking "Yes" will proceed with the installation. Where to Find Support
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics lg ce0560 wireless adapter driver
Searching for the LG CE0560 wireless adapter driver can be confusing because "CE0560" is not actually a model number—it is a European certification mark found on many LG products. For this specific adapter, the actual model number you need is the LG AN-WF100.
This adapter was primarily designed to add Wi-Fi to select 2010 and 2011 LG Smart TVs. However, because it uses a standard Broadcom chipset, it is possible to use it on a PC with the right drivers. Driver Compatibility and Downloads
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
is not a specific model number for a wireless adapter; rather,
is the CE mark identification number commonly found on the back of many LG wireless products, such as the AN-WF100 Wi-Fi USB Dongle Official Drivers & Compatibility
LG primarily designed these adapters for use with their Smart TVs (2010–2011 models) and they typically do not provide official Windows drivers for them.
: No driver installation is required. Simply plug the dongle into the TV's USB port. PC Use (Workaround) : If you are trying to use the
on a Windows PC, users have found success by manually installing drivers for the Netgear WNDA3100v2 , which uses the same internal Broadcom chipset. Where to Find Software
For other LG networking products or laptops that may use the "0560" marking, you can search for drivers on the official LG Software & Drivers portal LG Laptop Drivers
: If your device is an LG laptop (e.g., U560 or S560), look for the "Intel Wireless-AC 9560" or "802.11n Wireless LAN Card" drivers on the support page. Mobile Drivers
: If you need to connect an LG phone to your PC for tethering or file transfer, download the LG Mobile Driver exact model number of your device to find the correct driver?
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
The (often referenced interchangeably with model Go to product viewer dialog for this item.
) is a legacy USB Wi-Fi dongle originally designed for LG Smart TVs from the 2010–2011 era. While it was intended as a proprietary bridge to give older TVs "smart" features like Netflix streaming, it has become a cult favorite for tech enthusiasts looking to repurpose old hardware for modern PCs. The "Hidden" Identity The most interesting aspect of the
is that it isn't actually "LG" hardware on the inside. It is a rebranded Netgear WNDA3100v2 Go to product viewer dialog for this item.
. Because LG never released official Windows or macOS drivers for this device—restricting its use to their own TV software—getting it to work on a computer requires "tricking" your OS into recognizing its true Netgear identity. How to Repurpose It (The "Netgear Hack")
If you have one of these adapters and want to use it on a modern Windows PC, the standard LG support pages won't help. Instead, follow this community-tested workaround: Download the Correct Driver: You must use the Netgear WNDA3100v2 driver rather than searching for LG software. Manual Installation:
Plug the adapter into your PC. It will likely appear as an "Unknown Remote Download Wireless Adapter".
Open Device Manager, right-click the unknown device, and select Update Driver. Choose "Browse my computer for drivers"
and then "Let me pick from a list of available drivers on my computer". Force the Match: Scroll down to Netgear and select the Netgear WNDA3100v2 N600 Wireless Dual Band USB Adapter Go to product viewer dialog for this item.
. Windows will warn you about compatibility; ignore it and proceed. Performance Expectations is not a standalone product model number, but
Dual-Band Capability: Despite its age, it supports both 2.4 GHz and 5 GHz bands with speeds up to 300Mbps.
Modern Compatibility: While it can run on Windows 10 and 11 using the Netgear driver, its performance may be "moderate" compared to modern Wi-Fi 6 adapters.
TV Issues: If you are using it for its original purpose (an LG TV) and it isn't working, users often find that switching to a 2.4 GHz guest network or checking for a physical "crimped cord" inside the TV's internal module can fix connection drops.
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
is not a specific model number for a wireless adapter; rather,
is a regulatory compliance mark (CE marking) found on many LG electronic products. Most users looking for this driver are typically searching for the LG AN-WF100
USB Wi-Fi dongles, which were commonly used with LG Smart TVs from the 2010–2014 era. Device Identification & Official Support Common Real Model : The adapter is frequently the LG AN-WF100 , used for 2010 and 2011 LG Smart TVs.
: If you are using this with an LG TV, no separate driver download is needed. The TV’s firmware includes the driver. Ensure the adapter is plugged into a supported USB port and navigate to Settings > Network > Wi-Fi Connection Official Downloads
: You can search for software updates by entering your specific TV model on the LG Support Software & Drivers page How to Use the LG Adapter on a Windows PC
LG does not officially provide Windows drivers for these TV-specific dongles. However, because they use standard Broadcom chipsets, they can be manually installed using compatible drivers from other manufacturers: Download a Compatible Driver Netgear WNDA3100v2
driver is widely reported to work with the LG AN-WF100 hardware. Manual Installation
Plug the adapter into your PC. It will likely appear as "Remote Download Wireless Adapter" in Device Manager Right-click the device and select Update Driver Browse my computer for drivers Let me pick from a list Network Adapters as the manufacturer, and select the Netgear WNDA3100v2 N600
Accept the compatibility warning to complete the installation. www.tp-link.com Alternative Hardware Matches
If your device is an internal laptop card rather than a USB dongle, it may be an Intel Wireless-AC 9560 (the "560" in your search often leads to this).
Product Support: Support Home | LG USA Support - LG Electronics
is not a technical model number for a wireless adapter; rather, it is a regulatory mark (the CE mark followed by the 0560 Notified Body number) commonly found on the LG AN-WF100 Go to product viewer dialog for this item.
Wi-Fi USB Dongle. This adapter was originally designed to provide wireless internet to LG Smart TVs from 2010–2011.
Below are the details and steps required to install the correct drivers for this device on a PC. 🛠️ Technical Specifications
The device is built on a Broadcom chipset and supports the following standards: Interface: USB 2.0. Standards: IEEE 802.11a/b/g/n. Bands: Dual-band support (2.4GHz and 5GHz). Speed: Up to 300 Mbps. 📥 Driver Download & Installation
Since LG does not provide official Windows drivers for this TV-specific dongle, you must use compatible third-party drivers or "force-install" a similar Broadcom-based driver. Option 1: The Netgear WNDA3100v2 Method (Recommended)
This is the most reliable way to get the adapter working on Windows 10 or 11. Download: Search for and download the Netgear WNDA3100v2 driver. Q3: Can I use this adapter on a Mac
Install: Run the installer. If a "Netgear Genie" screen asks you to plug in the adapter, simply close the program.
Connect: Plug the LG adapter into your USB port. It will likely appear as an Unknown Device or Remote Download Wireless Adapter in the Windows Device Manager. Manual Update: Right-click the unknown device and select Update Driver.
Choose Browse my computer for drivers > Let me pick from a list of available drivers on my computer. Network adapters. Choose Netgear as the manufacturer and select Netgear WNDA3100v2 N600 Wireless Dual Band USB Adapter from the list.
Click Yes on any compatibility warnings to finish the installation. Option 2: Generic LG Wireless USB Installer
Some third-party driver repositories host a dedicated "LG Wireless USB Adapter Installer" (Version 10.1.37.98) which supports Windows XP through Windows 11. ⚠️ Important Troubleshooting Hardware ID: To confirm your device is definitely the
, you can check its Hardware ID in Device Manager (Properties > Details > Hardware Ids). It typically starts with USB\VID_043E&PID_3001.
Port Compatibility: Ensure you are using a USB 2.0 or 3.0 port directly on the motherboard for the best signal stability.
Legacy Support: If using Windows 7 or older, you may need the specific driver files for the Broadcom BCM4323 chipset.
If you are trying to use this for a specific project (like a Raspberry Pi or Linux build), I can look up the Linux kernel module commands for you.
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
IEEE 802.11a/b/g/n. Enables wireless LAN for Broadband and DLNA. USB 2.0. LG Wireless USB Adapter Drivers Download for Free
The LG CE0560 (often identified as the LG AN-WF100) is a Wi-Fi USB dongle originally designed to provide wireless internet access for select 2010–2011 LG Smart TVs. While primarily a TV accessory, users often seek drivers to repurpose this adapter for use on desktop or laptop computers. Driver Compatibility and Downloads
The LG CE0560 does not have a dedicated "PC driver" provided directly on the official LG Support site, as it was intended for plug-and-play use with TV firmware. However, the device is based on a standard Broadcom or MediaTek chipset, allowing it to function on Windows with alternative drivers.
Official LG Sources: LG provides firmware updates for the TV itself, which may improve dongle performance, rather than standalone PC drivers.
Third-Party Drivers: Sites like Driver Scape and DriveTheLife host compatible "LG Wireless USB Adapter" driver packages for Windows 10 and 11.
Alternative Chipset Drivers: Expert users have found success by installing the Netgear WNDA3100v2 driver, which shares the same underlying Broadcom chipset. How to Install the LG CE0560 Driver on a PC
If you are trying to use the LG CE0560 on a Windows computer, follow these steps to manually identify and install a working driver: Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG
Q3: Can I use this adapter on a Mac?
A: Very unlikely. No known macOS drivers exist for the LG CE0560. Use Boot Camp or a macOS-compatible adapter instead.
Alternative Solutions: What If the Driver Still Won’t Work?
If after all efforts the LG CE0560 refuses to work on Windows 11 or newer, consider these options:
- Use a modern Wi-Fi adapter – A new USB Wi-Fi adapter from TP-Link, ASUS, or Netgear costs as little as $10–15 and includes native Windows 11 drivers.
- Replace the chipset driver with a wrapper – Some users succeed with the
ndiswrappertool on Linux, but this is advanced. - Downgrade to Windows 7 – Not recommended for security reasons, but the LG CE0560 works out-of-the-box on Windows 7.
Frequently Asked Questions (FAQ)
Step 1: Identify the Chipset (Most Important)
The LG CE0560 is not manufactured by LG – it contains a reference chipset. To find the right driver, you need to know the real manufacturer and chipset ID.