LG LG-X155 Max that is hanging on the logo or experiencing LCD display issues, you must flash the stock firmware using the SP Flash Tool , as this specific model uses a MediaTek MT6582 Essential Technical Overview Device Model LG X155 Max : MediaTek MT6582 Key Issues Resolved Hang on Logo : Stuck at the boot screen after startup.
: Resolves software-related display distortions or blank screens. Dead Recovery : Revives devices that are soft-bricked or failing to boot. Required Tools & Files
Before starting, ensure your PC is running Windows and you have the following ready:
LG LG-X155 Flash File MT6582: Ultimate Guide to Fixing Hang on Logo and LCD Issues
If your LG LG-X155 (commonly known as the LG Bello II or LG Max) is stuck on the boot logo or displaying a blank/white screen after a software glitch, you are dealing with a classic "brick" or firmware corruption. Because this device runs on the MediaTek MT6582 chipset, you can use the SP Flash Tool to revive it.
This guide provides the necessary steps to flash the stock firmware to resolve boot loops, "Hang on Logo" errors, and LCD display issues. Prerequisites Before Flashing
Flashing firmware is a sensitive process. Ensure you have the following ready:
Battery Level: Ensure your phone has at least 70% charge to prevent it from turning off mid-process.
USB Cable: Use a high-quality, original micro-USB cable for a stable connection.
Data Backup: Flashing will wipe all internal data. If possible, backup your files before proceeding. Required Downloads To perform the fix, you need three specific components:
LG-X155 Stock ROM (Flash File): Ensure the firmware matches the MT6582 chipset. This file typically contains the "Scatter" file needed for the tool.
SP Flash Tool: The latest version (v5.x) is recommended for MediaTek devices.
MediaTek (MTK) VCOM Drivers: These allow your PC to communicate with the phone in "Preloader" mode. Step-by-Step Installation Guide 1. Install USB Drivers Lg LG-X155 Flash File MT6582 Hang On Logo Lcd Fix Firmware
Download and install the MTK VCOM USB Drivers on your PC. Without these, the SP Flash Tool will not recognize your LG-X155 when it is powered off. You may need to manually install them via the Device Manager on older versions of Windows.
For the LG-X155 Max (a MediaTek MT6582 device), a standout feature for a "Hang on Logo" or "LCD Fix" firmware would be Pre-Flash LCD Driver Validation.
Since "Hang on Logo" issues often stem from corrupted system partitions or incompatible display drivers—especially in budget devices where manufacturers might use different LCD panels across the same model—this feature would ensure a successful recovery without "white screen" or "blank screen" bugs after flashing. Feature Name: Smart-ID Display Recovery
This feature would be integrated into the firmware package or the flashing tool (like SP Flash Tool) to handle the specific "LCD Fix" requirement.
Dynamic Driver Matching: Automatically identifies the hardware ID of the connected LCD panel via the MediaTek preloader before writing the system partition. It selects the correct display driver from the firmware's library to prevent "black screen" or "flickering" issues often seen after a standard flash.
Logo-Loop Deep Clean: Instead of a standard firmware overwrite, it targets the boot.img and logo.bin partitions specifically for repair, clearing the cache/Dalvik-cache to resolve the "Hang on Logo" state without requiring a full data wipe if the user prefers.
Checksum Verification: Before the flash starts, the tool verifies the integrity of the MT6582 scatter file against the device's current partition table to ensure the firmware version is a safe match, preventing a "hard brick".
One-Click Unbrick Mode: A simplified interface within the tool that prioritizes the MT6582 preloader repair, which is critical for LG devices that won't enter standard Download Mode. How to use this feature: How to Download Firmware for LG X155 Max?, How To
Title: The Little LG That Wouldn’t Wake Up
Topic: LG-X155 Flash File (MT6582) Hang on Logo LCD Fix Firmware
It was a Tuesday morning when the old LG-X155 landed on Elena’s workbench. It was a relic from a simpler time—a small, rugged device with a scratched screen and a removable battery that clicked in with a satisfying snap. Its owner, a frantic delivery driver named Sam, had one plea: “It’s stuck. Just stuck. Please. My whole schedule is on that SD card.”
Elena took the phone and pressed the power button. The screen flickered to life, displaying the silver LG logo. And there it stayed. Five seconds. Thirty seconds. Two minutes. The little Android mascot never appeared. It was the classic “Hang on Logo” syndrome—a digital purgatory where the phone could see the gates of the operating system but could never enter. LG LG-X155 Max that is hanging on the
“Alright, Sam,” she said, gently prying the back cover off. “Let’s see what’s rotting inside.”
Under the hood lay the heart of the beast: a MediaTek MT6582 chipset. A workhorse from the mid-2010s, it was reliable but temperamental. A corrupted system partition, a bad update, or a sudden power loss during boot could send it into this endless loop. The fix wasn’t hardware—it was firmware. She needed the perfect stock ROM, the “Flash File,” to rewrite the phone’s brain.
She plugged the lifeless LG into her box. The computer beeped—a good sign. The preloader driver recognized the MT6582. But there was a catch. Sam had mentioned the LCD was a replacement. A cheap one from an online marketplace. Elena had learned the hard way that a mismatched screen driver could cause a successful flash to fail. You could write the perfect firmware, but if the LCD initialization code was wrong, the phone would boot in silence—a dark screen with a beating heart.
She dug through her archived firmware folders. Most flash files for the LG-X155 were generic. They worked, but they’d make the new LCD flicker, invert colors, or simply stay black. She needed the “LCD Fix” version.
After an hour of searching obscure forums and cross-referencing build numbers, she found it: LG-X155_MT6582_Stock_LCD_Fix_v2.4.zip. The comments section was full of desperate souls. “My phone is alive again!” one user cheered. “Fixed the white screen issue!” said another.
Elena extracted the scatter file and loaded SP Flash Tool. She selected “Download Only,” clicked the green arrow, and held her breath. The yellow progress bar began to crawl. Downloading DA… Flashing system… The little LG vibrated once, as if sighing in relief.
100%. Green checkmark.
She disconnected the phone and removed the battery—a hard reset for old times’ sake. She slid the battery back in, pressed the power button, and waited.
The silver LG logo appeared. Elena counted in her head. One Mississippi. Two Mississippi. The logo shimmered, then dissolved into the colorful wave of the Android boot animation. A few seconds later, the lock screen blazed to life, bright and crisp on the replacement LCD.
Sam’s delivery schedule was saved.
Elena smiled, closed the back cover, and placed the little LG on the “Ready for Pickup” shelf. Another zombie revived, another driver back on the road. All because one line in a firmware file had finally matched the pixels on a cheap replacement screen.
The LG-X155 would live to see another day. Title: The Little LG That Wouldn’t Wake Up
Flashing the LG LG-X155 (also known as the LG Bello II ) is a standard procedure to resolve issues like being stuck on the LG logo (boot loop) or LCD display glitches. This device uses the MT6582 MediaTek chipset, which means you will typically use the SP Flash Tool rather than the standard LG Flash Tool for KDZ files. ⚠️ Safety Warning
Flashing firmware carries significant risks. Proceed with caution:
Data Loss: This process will wipe all personal data from your device.
Permanent Damage: Using the wrong firmware or interrupting the process can "brick" your phone, making it permanently unusable.
Battery: Ensure your phone is charged to at least 80% before starting. Requirements
Firmware File: Search for the "LG-X155 MT6582 Scatter File" or "LG Prime 2 Stock ROM."
SP Flash Tool: The standard utility for MediaTek (MTK) devices.
MTK VCOM Drivers: Necessary for your PC to communicate with the phone in flash mode.
USB Data Cable: Use the original or a high-quality cable for a stable connection. How to Flash
Here is a unique issue with the LG-X155. Technicians often reflash the firmware 10 times without success. The problem? Hardware compatibility between the firmware and the LCD assembly.
If you flash the correct LG-X155 MT6582 firmware but still see a white screen, garbled display, or a "Hang on Logo" where the backlight stays on but the screen is distorted, you need the LCM (Liquid Crystal Module) Driver Fix.
MT6582 phones have different LCD suppliers (e.g., BOE, Truly, HX8394). Most stock firmware contains only one driver. If your physical LCD has a different driver, the phone will boot (you can hear sounds via USB/earphones) but the screen will freeze or stay white.
| Item | Details |
|------|---------|
| Firmware | LG X155 (MT6582) stock ROM – usually in KDZ or TWRP-flashable / SP Flash Tool format |
| Flashing Tool | SP Flash Tool v5 (for scatter firmware) or LG Flash Tool 2014 (for KDZ) |
| Driver | MTK USB VCOM drivers (for preloader mode) |
| LCD Fix note | If issue started after LCD replacement, the new LCD may require a different kernel/boot.img. Some aftermarket screens need a patched lk.bin or boot.img. |
The flash file provided below includes 3 different LCD drivers (ILI9806, NT35590, and HX8394). This ensures that regardless of your LG-X155's hardware revision, the display will work perfectly.