Menu
Accueil Services Partenaires A propos
Software
ZKBioTime ZKBio CVAccess
Support
Support PUSH SDK ADMS Firmware Formation Connect Device Download Installation Guide Tutorial API Troubleshooting Erreur 500 Fix Contact

Live View Axis Install Work -

Setting up live view for Axis devices typically involves connecting the camera to your network and accessing its web interface or a dedicated Video Management Software (VMS). This report covers the primary installation steps for direct web-based access and the AXIS Companion or AXIS Camera Station Go to product viewer dialog for this item. 1. Hardware Connection & Initial Discovery

Power and Connectivity: Connect the Axis camera to a network switch using a PoE (Power over Ethernet) cable to provide both power and data.

Locating the IP Address: Use the AXIS IP Utility software on a computer connected to the same network to broadcast and find the camera's IP address. If no DHCP server is available, the default IP is typically 192.168.0.90.

Initial Login: Access the IP address via a web browser (e.g., Chrome or Safari). You will be prompted to create a password for the default "root" user during the first login. 2. Live View Configuration via Web Interface live view axis install

Direct Access: Once logged in, the camera's live view page should open automatically. Modern Axis interfaces use HTML5 to stream H.264 video directly without requiring browser plugins.

Adjusting the View: Use the settings tab (often located in the lower-right corner) to adjust capture modes, orientation, and focus. Changes in the newer responsive web interface appear immediately in the live feed.

Stream Profiles: Select from predefined profiles (e.g., High, Medium, Low) to balance image quality with network performance. 3. Setting Up AXIS Companion (Small Systems) Setting up live view for Axis devices typically

For multi-camera setups, AXIS Companion provides a streamlined live view experience: AXIS Camera Station Pro - User manual

4.2 Recommended: Axis Edge Vault and AXIS Secure Remote Access

  1. Enable AXIS Secure Remote Access under System > Network > Cloud.
  2. Register camera with Axis.com account (no port forwarding needed).
  3. Use my.axis.com to view live stream securely via relay.

Live View Axis Install: A Step-by-Step Guide

Optimizing Your Live View Performance

Once the basic live view axis install is complete, fine-tune for quality and bandwidth:

1.3 Static IP vs. DHCP

For reliable remote live viewing, assign a static IP address to your Axis camera. If the IP changes via DHCP, your live view link will break. Enable AXIS Secure Remote Access under System >

Step 3: Access the Live View Page

  1. Open a web browser (Chrome, Edge, or Firefox — avoid deprecated plugins).
  2. Enter http://<camera-IP> in the address bar.
  3. Log in with default credentials:
    • Username: root
    • Password: (no password by default — you will be forced to create one on first login)
  4. After login, the Live View page loads automatically.

Step 1: Physical Installation and Cabling

The hardware layer is the foundation of any live view.

  1. Mount the Camera: Use the included mounting bracket. For outdoor models (like the Axis Q35 series), ensure the weather shield and gaskets are correctly seated.
  2. Run the Ethernet Cable: Connect one end to the camera’s RJ45 port. Connect the other end to your PoE switch.
    • Pro tip: If your switch is not PoE, use a PoE injector between the switch and the camera.
  3. Check Physical LEDs: Upon power-up, the status LED should flash amber during boot. Once steady green, the camera is receiving power and has a network link.

Option B: Manual Port Forwarding (Advanced)

  1. On your router, assign a static local IP to the camera’s MAC address.
  2. Forward TCP port 80 (HTTP) and TCP port 554 (RTSP) to that IP address.
  3. Access via: rtsp://[your-public-IP]:554/axis-media/media.amp
  4. Security warning: Always use a VPN instead of open port forwarding. Axis cameras have had vulnerabilities in the past; never expose them directly to the internet without a firewall rule limiting source IPs.

Prerequisites: What You Need Before You Start

To avoid frustration, gather these items before touching the hardware:

  1. An Axis Network Camera (e.g., M1065-L, P1378, Q3615).
  2. Power over Ethernet (PoE) Switch or Injector (Axis cameras are almost always PoE-powered).
  3. Cat5e/Cat6 Ethernet Cable (length appropriate for your install location).
  4. Axis IP Utility Software (free download from Axis website) or AXIS Device Manager.
  5. A Computer on the Same Network (Windows or macOS).
  6. Axis Camera’s Default Credentials: Username: root | Password: (no default password; you set it during first setup).