Important Note: The original M-Track Plus (silver/blue chassis with two combo jacks) is a legacy device. It is not officially supported on Windows 11, macOS Catalina (10.15) or newer. Workarounds exist, but success is not guaranteed.
If you have tried everything above and Windows still gives a yellow exclamation mark in Device Manager, you have two options.
Option 1: The Generic Windows USB Audio 2.0 Driver (Limited)
Option 2: Upgrade Your Interface The M-Track Plus is end-of-life. M-Audio no longer develops new drivers for it. If you are on macOS Sonoma/Sequoia or Windows 11 ARM, it is time to retire the unit. The modern equivalent is the M-Track Duo (which has up-to-date drivers for 2025).
Struggling to get your M-Audio M-Track Plus recognized by your computer? You’ve likely searched for the "M-Audio M-Track Plus driver full" – and ended up on shady forums or broken link pages. Let’s fix that. m audio mtrack plus driver full
The M-Audio M-Track Plus is a legendary 2-channel USB audio interface. For over a decade, it has been the backbone of home studios, podcasts, and mobile recording rigs. It is beloved for its rugged metal chassis, phantom power, and ultra-low latency.
However, there is a recurring nightmare for owners of this interface: driver compatibility.
Whether you have upgraded to Windows 11, migrated to an Apple Silicon Mac (M1/M2/M3), or are still rocking Windows 10, finding the correct full driver package is essential. Without it, your DAW (Digital Audio Workstation) won't see the device, you will experience pops, clicks, or the dreaded "Code 10" error.
This article will walk you through everything you need to know about the M-Track Plus driver: where to find the official full driver, how to install it correctly, troubleshooting common errors, and legacy support. Part 5: Alternatives if the "Full" Driver Fails
After installing the full driver:
If Windows doesn’t recognize it, try a different USB port (not 3.0, use 2.0 if possible) and a known-good USB cable.
A critical source of user error in driver procurement is the hardware revision. M-Audio released two distinct units:
These units require distinct driver binaries. The installation of an incorrect driver meant for the alternate hardware revision will result in the device not being recognized by the host system. The "full" driver package for the original M-Track Plus often includes a specific control panel applet, whereas the MK II drivers were designed to integrate more seamlessly with the OS native audio preferences. Go to Device Manager
To the uninitiated, a driver is just a file to download. To your computer, it is a translator.
The M-Audio M-Track Plus is a piece of hardware that speaks "analog" (your voice, your guitar). Your computer speaks "digital" (binary code). The driver acts as the bridge, allowing your Digital Audio Workstation (DAW)—whether it’s Pro Tools, Ableton Live, or FL Studio—to communicate efficiently with the interface.
Without the specific M-Audio M-Track Plus driver, your computer tries to use generic drivers (like Windows' standard "USB Audio Device"). These generic drivers are notoriously unstable, have high latency (lag), and often don’t allow you to access the interface’s exclusive features, such as direct hardware monitoring or the correct sample rate settings.
| Problem | Likely Fix | |---|---| | No sound / not detected | Try different USB port (USB 2.0 preferred). Use a powered USB hub if needed. | | Driver won’t install (Windows) | Disable driver signature enforcement (Windows 10): Shift + Restart → Troubleshoot → Startup Settings → Disable driver signature. | | Crackling / pops | Increase buffer size in your DAW (512 or 1024 samples). | | Device disappears after sleep | Unplug/replug USB or restart. | | macOS no input/output | Go to Security & Privacy → Microphone → Allow your DAW. | | Windows 11 not recognizing | Force install generic USB Audio 2.0 driver manually in Device Manager → Update driver → Browse → Let me pick → USB Audio Device. |