Mikrotik Change Software Id Link _verified_ -

The Software ID (SoftID) in MikroTik RouterOS is a unique eight-character identifier used for licensing. It is typically generated based on the serial number of the storage device (HDD, SSD, or flash drive) where RouterOS is installed. Because this ID is tied to physical hardware, it cannot be changed manually through the software interface to a custom value.  🛠️ Finding Your Software ID 

You can locate your Software ID using one of the following methods:  Winbox: Navigate to System → License. Terminal: Type the command /system license print. WebFig: Go to the System menu and select License.  🔄 Situations Involving ID Changes 

While you cannot simply "edit" a Software ID, certain actions will cause it to change or allow for a one-time correction:  ⚙️ Hardware Modifications 

Replacing Storage: If you replace the hard drive or flash media, a new Software ID will be generated.

License Loss: Changing the storage media usually results in the loss of the existing license, requiring the purchase of a new key.

Hardware Failure: If your storage fails, contact MikroTik Support for assistance with license transfers or "replacement keys."  📝 Free One-Time Correction  mikrotik change software id link

If you are using an x86 system and made a mistake when purchasing your license: 

You are allowed to change up to 2 characters for free if you made a typing error.

This change must be done before the key is upgraded or the system is enabled.  ☁️ Cloud Hosted Router (CHR) 

For virtual installations using MikroTik CHR, the licensing model is different: 

Licenses are tied to your MikroTik account, not the specific Software ID. The Software ID (SoftID) in MikroTik RouterOS is

You can transfer licenses between different virtual instances easily through the MikroTik Client Area.  🔗 Useful Official Links 

License Purchase & Software ID Entry: Log in here to manage your keys or convert prepaid keys.

RouterOS License Keys Documentation: Official guide on how licenses and IDs work.

Contact MikroTik Support: Use this if your hardware failed and you need to recover a license. 

⚠️ Warning: Be cautious of third-party tools claiming to "spoof" or "change" Software IDs, as these often violate MikroTik's terms of service and can lead to permanent license blacklisting.  Open WinBox and connect to your router

Are you looking to transfer a license to a new device, or did your Software ID change unexpectedly after an update?  AI responses may include mistakes. Learn more RouterOS license keys - MikroTik

Method 1: Via WinBox (GUI)

1. Open WinBox and connect to your router.
2. On the left menu, click System.
3. Click Identity.
4. In the Name field, enter your desired name (e.g., Office-Floor-1).
5. Click Apply or OK.
   • Note: If you are connected via MAC address (Layer 2), the "Name" column in the Neighbor Discovery list might take a moment to update.

On the NEW router (after hardware change):

1. Get the new Software ID:
   /system license print
2. Go to MikroTik Account → "My Licenses" → find your license.
3. Click "Transfer" → enter the new Software ID.
4. On the new router:
   /system license import (paste the key or upload file)

Step 1: Obtain the New Software ID

First, you need the Software ID of the new device you want to license.

• Open WinBox or SSH.
• Go to System > License.
• Copy the Software ID displayed there.

Error 1: "Can't change Software ID – Demo time exceeded"

• Cause: You are trying to re-host a license on a new ID, but the target hardware is already running a trial license that expired.
• Fix: Re-install RouterOS from scratch to reset the trial flag before applying the new license key.

Error 3: No "Re-host" link visible

• Cause: RouterBOARD licenses (Level 6 on official hardware) are non-transferable. The Software ID on a CCR or RB1100AHx4 is welded to the board. You cannot change it because you never need to.
• Fix: If the hardware fails, you must buy a new router. You cannot move the license.

4. How to Force a NEW Software ID (x86 only)

If you want to generate a different Software ID on an x86 MikroTik (e.g., to use a second trial license):

1. Backup your config.
2. Change the hard disk (or change its serial number using manufacturer tools).
3. Fresh install RouterOS using Netinstall.
4. The Software ID will recalculate based on the new disk serial.

Summary Table: What Changes Software ID?

| Action | Software ID changes? | |--------|----------------------| | Change System Identity + Reboot | ✅ Yes | | Replace hard drive | ✅ Yes | | Upgrade RouterOS version | ❌ No | | Reset configuration | ❌ No | | Change license level | ❌ No | | Netinstall with same disk | ❌ No |

Scenario C: Migration

You are moving from an old Dell server to a new Supermicro server. You need to transfer your paid license.

In all these cases, you do not change the ID. You link the existing license to the new ID.