Mtk Driver V1.0.14 〈2025-2027〉

The MTK (MediaTek) Driver v1.0.14 is a specific version of the USB VCOM drivers required for your computer to communicate with MediaTek-based smartphones or tablets. This version is particularly critical for users attempting to "flash" or modify their device software using tools like the SP Flash Tool. Why this specific driver is needed

The MTK Driver v1.0.14 acts as a bridge, allowing your Windows PC to recognize your device when it is in Preloader or VCOM mode. Without it, your computer will likely fail to detect the device during the critical "power-off" connection phase required for firmware updates. Key Installation Steps

Installing these drivers often requires a manual touch because they are frequently "unsigned." mtk driver v1.0.14

Manual Installation: You typically must add them as "Legacy Hardware" through the Windows Device Manager.

Driver Signature Enforcement: If you are on Windows 10 or 11, you may need to temporarily disable driver signature enforcement to allow the installation. This is found under the "Advanced Startup" options in your Recovery settings. The MTK (MediaTek) Driver v1

VCOM Selection: During setup, ensure you select the correct .inf file and the appropriate architecture (32-bit or 64-bit) for your operating system to avoid connection errors. Common Uses Restoring a "bricked" or non-responsive phone. Updating or downgrading device firmware. Installing custom recoveries (like TWRP) or custom ROMs.

Are you having trouble with a specific connection error or needing a direct download link for this version? Install MTK (MediaTek Drivers) Windows 10 64 bit & 32 bit Extract MTK_Driver_v1

Steps

  1. Extract MTK_Driver_v1.0.14.zip.
  2. Run Install_Driver.exe as Administrator.
  3. Follow the on-screen prompts.
  4. Connect your MediaTek device in Offline/Preloader mode (hold Volume Down/Up while connecting USB).
  5. Wait for driver auto-assignment via Windows Device Manager.

Step 1 – Disable Driver Signature Enforcement (Windows 10/11 only)

If you see "Third-party INF does not contain digital signature information," do this:

  1. Click Start > Power > hold Shift while clicking Restart.
  2. After reboot, choose Troubleshoot > Advanced Options > Startup Settings > Restart.
  3. Press F7 (Disable driver signature enforcement).
  4. Log into Windows normally.

Manual Installation (if auto-installer fails)

  1. Open Device Manager.
  2. Right-click unknown device → Update driver.
  3. Browse → Let me pick → Have Disk.
  4. Navigate to extracted drivers folder → Select mtk_usb.inf.
  5. Choose matching model → Install.