Mxq Amlogic S805 Android 511 Lollipop Download Install |work| · Direct & Trending

MXQ Amlogic S805: Android 5.1.1 Lollipop Download and Installation Guide

Upgrading an older MXQ Amlogic S805 TV box to Android 5.1.1 Lollipop can significantly breathe new life into the device, allowing it to run newer apps and offer a more modern user interface. While these boxes originally shipped with Android 4.4 KitKat, enthusiasts have developed various firmware ports to bridge the gap. Essential Preparation & Requirements

Before starting, identify your specific hardware. The MXQ S805 comes in many variations, such as the "all black" HD18q, Q, or red-stripe models.

Hardware Check: This firmware is generally compatible with HD18q or Q models with 1GB of RAM. It is not recommended for "Blink" versions or the M21D models with only 512MB of RAM.

Backup: Always perform a full backup using TWRP recovery. This allows you to revert to your original stock firmware if the installation fails. Tools Needed: A high-quality Micro SD card (FAT32 formatted).

A toothpick or non-conductive pin for the "reset" button hidden inside the AV port. A USB mouse (often required to navigate TWRP menus). Where to Download Firmware

Finding the correct image is critical. Because official support ended years ago, you must rely on community-verified links:

Community Images: Several custom ROMs, including those ported from the Minix Neo X6, are known to work on certain S805 boards.

Download Mirrors: Users often find hosted files on Google Drive or through dedicated enthusiasts like those at MXQ Project. Installation via TWRP Recovery

This is the most common method for installing custom Android 5.1.1 Lollipop builds.

Prepare the SD Card: Copy the firmware .zip file and the recovery.img (TWRP) to the root of your SD card. Boot into Recovery: Insert the SD card into the MXQ box. Disconnect the power cable.

Use a toothpick to press and hold the reset button inside the AV port. While holding the button, plug the power cable back in. mxq amlogic s805 android 511 lollipop download install

Release the button after 10–15 seconds once the TWRP screen appears. Wipe and Install:

In TWRP, go to Wipe and perform a "Factory Reset" (this deletes all your data).

Return to the main menu, select Install, and choose the Android 5.1.1 Lollipop .zip from your SD card. Once completed, select Reboot System. Installation via USB Burning Tool

Some firmware versions use an .img file meant for the Amlogic USB Burning Tool. Install the Amlogic USB Burning Tool on your PC. Load the .img firmware file into the tool.

Connect the TV box to your PC using a USB-to-USB (Male to Male) cable while holding the reset button.

Once the tool detects the device, click Start to begin the flash process. Troubleshooting & Alternatives

You're looking for information on installing Android 5.1 Lollipop on an MXQ device with an Amlogic S805 chip.

Device Overview

The MXQ is a TV box based on the Amlogic S805 chipset, which is a quad-core ARM Cortex-A7 processor with a Mali-450MP3 GPU. The device likely came with Android 4.4 KitKat out of the box, but you're interested in upgrading to Android 5.1 Lollipop.

Upgrade Options

There are a few ways to upgrade your MXQ device to Android 5.1 Lollipop: MXQ Amlogic S805: Android 5

  1. Official Firmware Update: Check the manufacturer's website for an official firmware update. Sometimes, device manufacturers release updates that can be installed via USB or SD card. However, it's unlikely that an official update will be available for Android 5.1 Lollipop, as the Amlogic S805 chipset might not be compatible with the newer Android versions.
  2. Custom ROMs: You can try searching for custom ROMs developed by the community. These are unofficial firmware builds created by enthusiasts, which may offer newer Android versions, including Lollipop. However, be aware that custom ROMs can be unstable, and there's a risk of bricking your device if something goes wrong.
  3. Firmware Mods: Some developers create firmware mods that can update the device to a newer Android version. These mods usually require a rooted device and a custom recovery mode.

Installing Android 5.1 Lollipop on MXQ (Amlogic S805)

If you still want to proceed, here are some general steps to install Android 5.1 Lollipop on your MXQ device:

Requirements:

  • A computer with a compatible USB driver
  • A USB cable
  • An SD card (at least 4GB free space)
  • A custom recovery mode (e.g., ClockworkMod or TWRP)
  • Android 5.1 Lollipop firmware image (either official or custom)

Steps:

  1. Backup your data: Before you start, make sure to backup your important data, as the installation process will wipe your device clean.
  2. Enable Developer Options: Go to Settings > About > Build number and tap on it 7 times to enable Developer Options.
  3. Enable USB Debugging: Go to Settings > Developer Options > USB debugging and enable it.
  4. Install custom recovery: Download and install a custom recovery mode (e.g., ClockworkMod or TWRP) on your device.
  5. Download the firmware image: Find a compatible Android 5.1 Lollipop firmware image for your MXQ device (Amlogic S805).
  6. Copy the firmware image to the SD card: Transfer the firmware image to the SD card.
  7. Boot into recovery mode: Reboot your device into recovery mode by holding the Power button and the Volume down button simultaneously.
  8. Install the firmware image: In recovery mode, select the option to install the firmware image from the SD card.
  9. Wait for the installation to complete: The installation process may take several minutes.
  10. Reboot your device: Once the installation is complete, reboot your device.

Risks and Considerations

  • Bricking: Installing custom firmware or mods can potentially brick your device if something goes wrong.
  • Instability: Custom ROMs and firmware mods can be unstable and may cause issues with your device.
  • Compatibility: Make sure the firmware image you download is compatible with your device (Amlogic S805).

Conclusion

While it's possible to install Android 5.1 Lollipop on your MXQ device with an Amlogic S805 chip, it's essential to be aware of the risks and considerations involved. If you're not comfortable with the installation process or the potential risks, you may want to stick with your current Android version or wait for an official update from the manufacturer.

Upgrading your older MXQ Amlogic S805 TV box to Android 5.1.1 Lollipop can breathe new life into the hardware, though it requires specific firmware and a careful installation process. Key Features of Android 5.1.1 on Go to product viewer dialog for this item. The Lollipop update for the

processor (originally designed for Android 4.4 KitKat) offers several enhancements:

Material Design UI: A refreshed, modern look with more fluid animations.

Better App Compatibility: Provides a higher API level, allowing you to run more modern versions of apps like Kodi (though many users prefer LibreELEC for a smoother experience). Official Firmware Update : Check the manufacturer's website

Improved Notifications: Better control over interruptions and a redesigned notification tray. Hardware Performance: While the

is older, this firmware showcases its peak capabilities, including H.265 hardware decoding support. Download and Installation Guide

Warning: This process involves flashing custom firmware which can "brick" your device if done incorrectly. It is primarily recommended for the HD and Q models. 1. Preparation

Firmware: Locate the specific "Abdul" or "K1" ported Lollipop image for the

Tools: You will need an SD Card or USB Drive, a PC, and potentially TWRP Recovery. 2. Installation Steps (via TWRP)

8. Post-Installation Issues & Solutions

| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Wi-Fi not working | Wrong Wi-Fi driver in firmware | Find correct firmware variant | | No boot after flash | Bootloader mismatch | Reflash with USB Burning Tool, erase flash option | | Remote control not working | Different IR keymap | Edit remote.conf or use USB mouse | | Google Play crashes | Outdated GApps | Sideload Google Services APK (arm, Android 5.1) |

Part 6: Performance Tuning for Android 5.1.1 on S805

Lollipop can run sluggish on the old Cortex-A5. Apply these tweaks:

3. Download Sources for Android 5.1.1 (Lollipop)

Official sources no longer exist. Archive and community sources are the only options.

| Source Type | Example URLs / Methods | Risk Level | |-------------|------------------------|------------| | ChinaGadgetsRevolution | chinagadgetsreviews.com – Search "MXQ S805 Android 5.1.1" | Medium | | FreakTab Forum | freaktab.com – Dedicated Amlogic S805 sections | Low (Community verified) | | 4PDA (Russian) | 4pda.to – Requires account; detailed user feedback | Low (if translated) | | Baidu / Google Drive | Direct links from forum posts | High (Malware risk) | | Amazon Backup Links | Some sellers host old firmware | Medium |

6. Post-Installation Steps

After successful flash:

  1. First boot takes 5–10 minutes.
  2. Perform factory reset: Settings → Backup & Reset → Factory data reset.
  3. Disable automatic updates (no official updates exist).
  4. Install a lightweight launcher (e.g., HALauncher) to reduce RAM usage.

Step 1: Install the Tool

Run the Amlogic USB Burning Tool installer on your PC. Once installed, open the program. You may need to switch the language to English via the "File" menu if it defaults to Chinese.

6. Installation Methods

1. Know Your Hardware: The Amlogic S805 Limitations

Before you search for a download link, you must understand what this device can handle. The Amlogic S805 is a 32-bit, quad-core Cortex-A5 processor.

  • The Android 5.1.1 Advantage: The original MXQ boxes often came with Android 4.4 (KitKat). Upgrading to (or reinstalling) Android 5.1.1 (Lollipop) is highly recommended because it offered better memory management, a smoother UI, and—crucially—better support for external storage.
  • The Android 7.1 Myth: You may see "MXQ" boxes running Android 7.1 (Nougat). Do not attempt to flash these on an S805 device. Those ROMs are designed for the S905 processor (a newer, 64-bit chip). Flashing an S905 image onto an S805 box will result in a permanent "hard brick."

Target Specification:

  • Device: MXQ (Black or Silver box, usually with an external antenna).
  • Chipset: Amlogic S805.
  • OS Goal: Android 5.1.1 Lollipop.