Nalco 2593 Msds [upd] -

Nalco 2593 MSDS — Overview

Nalco 2593 is a commercial chemical formulation produced for industrial water treatment (scale and corrosion control, dispersant, or related functions). An MSDS (Material Safety Data Sheet; also called SDS under GHS) for Nalco 2593 contains the safety, handling, transport, and regulatory information employers and workers need to manage risks when using the product.

Below is a structured, general write-up summarizing the typical contents and key points you should expect in an MSDS/SDS for a product like Nalco 2593. This is a template-style summary and not a substitute for the actual, product-specific SDS — always obtain the manufacturer’s current SDS before handling the chemical.

11. Toxicological Information

• Acute Toxicity:
  • Oral (LD50 Rat): Estimated >500 mg/kg (Harmful if swallowed). Sodium Nitrite is toxic via this route.
• Eye Damage: Severe damage is expected due to alkaline nature (Sodium Hydroxide).
• Sensitization: Not expected to be a sensitizer.
• Carcinogenicity: Components are not listed as carcinogens by NTP, IARC, or OSHA. (Note: Sodium Nitrite is sometimes scrutinized for potential nitrosamine formation, but is generally regulated as an occupational irritant/toxicant).

2. Hazard Identification (GHS Classification)

NALCO 2593 is classified as a hazardous material under OSHA Hazard Communication Standard (29 CFR 1910.1200) and GHS.

• Signal Word: Warning
• Hazard Statements:
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H317: May cause an allergic skin reaction (sensitization).
  • H411: Toxic to aquatic life with long lasting effects.

6. Accidental Release Measures

• Personal Precautions: Wear appropriate PPE (goggles, gloves, protective clothing). Avoid contact with skin and eyes.
• Environmental Precautions: Prevent entry into waterways, sewers, basements, or confined areas. Sodium nitrite and boron compounds can be toxic to aquatic life.
• Cleanup Methods:
  • Small spills: Absorb with inert material (sand, vermiculite) and place in containers for disposal.
  • Large spills: Dike far ahead of spill for later disposal. Neutralization may be required depending on local regulations.

Recommendation for User

Because this report is generated from historical data summaries, it should not be used for workplace labeling or emergency response. To obtain the legally binding document: nalco 2593 msds

1. Go to Ecolab's official website (ecolab.com).
2. Navigate to the "Safety Data Sheets" section.
3. Search for "Nalco 2593" or the specific product number.
4. Download the PDF to verify the revision date matches the product you have on hand.

Nalco 2593 is a specialized non-oxidizing microbiocide primarily used to control bacteria, algae, and fungi in industrial water systems. Because it is classified as a hazardous chemical, having the Material Safety Data Sheet (MSDS)—now more commonly referred to as the Safety Data Sheet (SDS)—is essential for safe handling and regulatory compliance. What is Nalco 2593?

Nalco 2593 is a liquid biocide formulation designed for industrial cooling towers, closed-loop cooling systems, and air washers. It is often used in food processing facilities for treating boilers and steam lines, provided that the steam or treated water does not come into direct contact with edible products. Chemical Family: Isothiazolinone.

Active Ingredients: Typically contains 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one. Physical State: Liquid. Key Sections of the Nalco 2593 MSDS/SDS Nalco 2593 MSDS — Overview Nalco 2593 is

An MSDS provides critical information across several sections to ensure workplace safety. For Nalco 2593, the following sections are of particular importance: 1. Hazard Identification Nalco 2593 is classified as a corrosive material.

Health Hazards: It can cause severe skin burns and permanent eye damage. It is also a known skin sensitizer, meaning repeated exposure can lead to allergic reactions.

Environmental Hazards: As a biocide, it is highly toxic to aquatic life and must be prevented from entering natural waterways. 2. First Aid Measures In the event of exposure, immediate action is required: Acute Toxicity:

Eye Contact: Rinse immediately with plenty of water for at least 15 minutes, holding eyelids open. Seek urgent medical attention.

Skin Contact: Remove contaminated clothing and wash the skin thoroughly with soap and water.

Ingestion: Do not induce vomiting. Rinse the mouth with water and contact a poison control center immediately. 3. Handling and Storage

Isothiazolinone Microbiocide Safety Guide | PDF | Waste - Scribd

This review is based on the typical composition and hazard profile of Nalco 2593, a water treatment chemical (specifically a corrosion and scale inhibitor used in cooling water systems). Note: Always refer to the latest SDS from your specific supplier, as formulations can vary.

---