To download the proper 64-bit driver for your NCR POS printer, the official and most secure method is through the NCR Voyix (formerly NCR) Support Portal. Step-by-Step Official Download Access the Portal: Visit the NCR Drivers and Patches page.
Navigate to Printers: Select Retail Support Files > NCR RealPOS and SelfServ Peripherals > Printers.
Choose Your Model: Locate your specific printer model (e.g., Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. ) from the list.
Select Driver: Choose the Windows Printer Driver package. Official NCR drivers generally support both 32-bit and 64-bit Windows 10/11 architectures. Key Driver Features NCR POS Printer Driver
(currently at version 6.0.7) provides essential functionality for retail environments:
Device Communication: Connects receipt and multifunction printers to your POS system via USB, Serial, or Ethernet.
Advanced Control: Enables automatic paper cutting, cash drawer triggering, and status monitoring.
Media Support: Supports printing barcodes, logos, and high-quality graphics on receipts. Installation Tips for Windows 10/11 NCR Printers drivers download for Windows (32/64bit)
Comprehensive Guide to NCR POS Printer Drivers (64-Bit) Setting up an NCR POS Printer
on a modern 64-bit Windows system requires specific driver versions to ensure compatibility with high-performance point-of-sale environments. This guide covers how to find, install, and configure these drivers for 64-bit architectures like Windows 10 and 11. 1. Identifying the Correct 64-Bit Driver
NCR provides dedicated software versions based on the system architecture. When downloading, ensure you select the version designated for 64-bit (x64) systems. Ncr Pos Printer Driver-64 Bit-
Version 6.1.x: This is the specific series intended for 64-bit operating systems. Version 6.0.x : Typically reserved for 32-bit systems.
Supported Models: These drivers cover a wide range of hardware, including the , , and the high-speed NCR 7199 receipt printer . 2. Installation Procedure for 64-Bit Windows
For a successful installation, you often need both an .exe installer and an .msi file located in the same directory.
Download and Extract: Obtain the driver package (e.g., NCR POS Printer Driver(64bit).msi) from a reliable source like the NCR Voyix Online Help or trusted repositories like DriverHub.
Run as Administrator: Right-click the .exe file and select Run as Administrator to grant necessary permissions for system-level changes.
Follow the Setup Wizard: Progress through the prompts. The installer will automatically place driver files for all NCR printers in the background, typically in C:\Program Files\NCR\NCR POS Printer Driver\.
Hardware Connection: Connect your printer via USB or Serial. For USB connections, Windows should recognize the device as an EPiC Interface. 3. Configuring Virtual COM Ports (Edgeport)
Many POS applications require a COM port to communicate with the printer, even when using USB.
Edgeport Drivers: These allow the USB printer to appear as a virtual COM port.
Verification: Check Device Manager under "Ports (COM & LPT)". The printer is typically listed as an EPIC port (COMx). To download the proper 64-bit driver for your
Software Setup: In your POS software (like uniCenta POS), select the corresponding COM port number identified in the previous step. 4. Advanced Settings and Features
Once installed, you can customize the printer's behavior through Printing Preferences: Windows 10 - NCR Voyix
This is a comprehensive guide to installing and configuring NCR POS Printer drivers on a 64-bit Windows system (Windows 10, Windows 11, or Windows Server).
Because NCR hardware is often legacy equipment running on modern systems, the installation process can be slightly different than standard office printers.
There are two primary sources for these drivers.
NCR does not have a "one-size-fits-all" driver. Different printer families require different driver packages. Here are the most common NCR POS printer series requiring a 64-bit driver:
Pro Tip: Check the serial tag on the bottom of the printer. Look for the "Model Number." Do not guess; downloading the wrong driver package will waste hours of troubleshooting.
If you cannot access the NCR portal, use the "Engine" logic from Phase 1.
Important: Always download the "Advanced Printer Driver" or "Windows Driver", not just a utility. The file format is usually
.exeor.msi.
If you can share your exact NCR printer model and POS software name, I can give you a direct download link or more precise steps. Method A: USB Plug-and-Play (Easiest)
The morning shift at "The Daily Grind" was usually a well-oiled machine, but today, the gear had jammed. Sarah, the shop manager, stared at the brand-new 64-bit workstation that had just replaced their aging desktop. It was sleek and fast, but it had one major problem: it refused to talk to the NCR POS receipt printer.
Customers were already lining up, and the "Print" command was met with a cold, digital silence. Sarah knew she couldn't just plug and play this time. The old 32-bit drivers were useless on this new system. She took a deep breath and followed the steps she had scribbled in her "Emergency Tech" notebook.
First, she identified the exact model of the printer by flipping it over and checking the silver sticker on the bottom—an NCR RealPOS 7197. She knew that 64-bit systems are picky; they require drivers specifically signed and designed for x64 architecture.
She navigated to the official support portal, bypassing the sketchy "free driver" websites that often carry malware. Under the "Peripherals" section, she located the "NCR Retail Systems Software." She looked for the "RealPOS Thermal Receipt Printer" category and specifically filtered for "Windows 10/11 64-bit."
The download was a ZIP file. Sarah didn't just double-click everything; she extracted the folder first. Inside, she found the "Advanced Checkout Architecture" (ACA) drivers. She ran the setup as an Administrator—a crucial step for 64-bit permissions.
Halfway through the installation, the screen prompted her to select the interface. She chose "USB," ensuring the cable was snug. As the progress bar reached 100%, the printer gave a small, mechanical twitch.
Sarah opened the Control Panel, found "Devices and Printers," and saw the NCR icon sitting there, no longer grayed out. She right-clicked, hit "Printer Properties," and clicked "Print Test Page." Whirrr-zip.
A crisp, white slip of paper slid out. The 64-bit bridge was built. Sarah looked up at the first customer in line and smiled. "Double espresso? Coming right up."
If you're trying to get your own printer running, I can help you find the exact file if you tell me: The exact model number (usually starts with 71xx)
Which Operating System you are using (Windows 10, 11, or a Server version?) How it's connected (USB, Serial, or Ethernet?)