Nitocote Pe135 Msds |link| 🆕 No Password

Nitocote PE135 Safety Data Sheet (SDS) identifies the product as an eco-friendly, grey, viscous liquid coating based on hydrophobic polyester resin

. It is primarily used for waterproofing and as a protective coating for concrete, especially in underground structures like foundations and box culverts. Key Safety Information The product is generally considered

and environmentally friendly. It is free from hazardous materials like coal tar pitch, hydrocarbon-based solvents, and aromatic amines. First Aid Measures: Skin Contact:

Remove contaminated clothing and wash the skin immediately with soap and water. Do not use solvents to clean the skin. Eye Contact:

Flush eyes thoroughly with plenty of clean water and seek medical treatment immediately if contamination occurs. Personal Protection: , barrier creams (like Kerodex Antisolvent), and

is recommended during handling to prevent skin sensitivity and eye contact. Technical & Handling Details The material has a shelf life of 6 to 12 months

when stored in a cool, dry place below 25°C in its original, unopened containers. Tools and equipment can be cleaned with clean water

while the coating is still damp. If it has dried, a scourer may be required. Application Constraints: It should not be applied at temperatures below For the full, official document, you can access the Nitocote PE135 SDS on Scribd or check the manufacturer's technical data at Do you need guidance on application rates chemical resistance specs for a specific project? Nitocote PE135 - Fosroc

Nitocote PE135 is a single component, high performance, grey colour viscous liquid coating based on hydrophobic polyester resin. Nitocote PE135 Safety Data Sheet | PDF | Toxicity - Scribd

This guide provides an overview of the safety and handling guidelines for Fosroc Nitocote PE135, based on safety data sheet (SDS) information.

Nitocote PE135 is a single-component, water-based hydrophobic polyester resin coating used for waterproofing and protecting concrete, generally considered non-toxic and environmentally friendly. Safety Data Sheet (MSDS) Highlights 1. Hazard Identification Eye Irritation: May cause mild irritation. Skin Contact: Prolonged contact may cause mild irritation.

Inhalation/Ingestion: Generally low hazard, but industrial hygiene practices should be followed.

Hazardous Ingredients: Free from coal tar, solvents, and carcinogens. 2. First Aid Measures

Eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Skin: Wash with soap and water. Inhalation: Move to fresh air.

Ingestion: Do not induce vomiting. Seek medical attention if symptoms persist. 3. Firefighting Measures Flammability: Not flammable (water-based).

Extinguishing Media: Use water spray, foam, dry chemical, or carbon dioxide. 4. Accidental Release Measures

Spills: Absorb with sand, earth, or a similar inert material.

Cleaning: Wash spill site with water. Do not allow material to enter drains or watercourses. 5. Handling and Storage

Handling: Wear appropriate protective equipment (gloves, goggles). Use in well-ventilated areas.

Storage: Keep containers tightly closed in a dry, cool place. Protect from frost and direct sunlight. Application Guide

Surface Prep: Surfaces must be clean, free from laitance, oil, and dust. Damp Substrates: Suitable for application on damp concrete. Method: Apply by roller or brush. Coverage: 2.5 m2m squared per litre (per coat). Thickness: Minimum 200 microns DFT ( microns wet film thickness) per coat. Coats: Two coats applied at right angles, preferably.

To make sure you have the most up-to-date information for your project, would you like: A link to the full, printable PDF SDS document? Specific dilution or cleaning instructions? Guidance on curing times? Nitocote PE135 Data Sheet | PDF - Scribd

Understanding Nitocote PE135: Safety, Composition, and Protective Properties

Nitocote PE135 is a high-performance, single-component protective coating and curing compound manufactured by Fosroc. Based on a hydrophobic polyester resin, this water-based emulsion is primarily used for waterproofing and corrosion protection of concrete substrates, especially in underground structures and foundations.

The Safety Data Sheet (SDS)—formerly known as the Material Safety Data Sheet (MSDS)—is a critical document for understanding the product's chemical makeup and necessary safety precautions for handling, storage, and transport. 1. Composition and Hazard Identification

Nitocote PE135 is marketed as an eco-friendly, non-toxic alternative to traditional coatings.

Key Components: The viscous grey liquid contains ingredients such as talc and silica flour.

Safety Profile: Unlike many industrial coatings, it is entirely free from hazardous materials such as coal tar pitch, asbestos, and hydrocarbon-based solvents.

Health Hazards: While generally safe, the SDS identifies potential risks such as serious eye irritation and potential skin sensitivity in some individuals. 2. Safety Precautions and First Aid nitocote pe135 msds

Proper handling as outlined in the SDS ensures safe application and minimizes environmental impact. Fosroc Nitocote PE135 - Petroline Technical Services

Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin. It is commonly used for corrosion protection on concrete substrates, foundations, and as a curing compound. Safety & Hazard Summary

While Nitocote PE135 is water-based and free from many common carcinogens like coal tar pitch, the Safety Data Sheet (SDS) still highlights important precautions: Petrolinetech Eye Contact : Can cause serious eye damage or irritation. Skin Contact

: May cause sensitisation or allergic reactions in sensitive individuals. Inhalation

: Prolonged inhalation of high concentrations may damage or irritate the respiratory system. : Toxic if swallowed. Handling & Personal Protection To ensure safe application, follow these recommended guidelines: Petrolinetech Protective Gear

: Wear tight-fitting chemical splash goggles, protective gloves, and appropriate clothing.

: Use barrier creams (e.g., Kerodex Antisolvent). If the product touches skin, wash immediately with soap and water; do not use solvents for cleaning skin. Ventilation

: Ensure adequate general and local exhaust ventilation when working in confined spaces.

: Store in a cool, dry, well-ventilated area in original containers at temperatures not exceeding 40°C. Application Guide Nitocote PE135 Data Sheet | PDF - Scribd

Fosroc’s Nitocote PE135 is a single-component, grey-colored viscous liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance chemical and abrasion resistance for concrete surfaces, particularly in underground applications and foundations Product Overview Eco-Friendly Composition

: Unlike many industrial coatings, Nitocote PE135 is free from hazardous materials such as coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Dual Functionality

: It acts as both a protective coating and a curing compound in a single application, which helps save on labor and construction time. Versatile Application

: It can be applied to "green" concrete as young as 24 hours old. Technical Specifications Curing Time

: Surface drying is rapid, taking approximately 35–40 minutes at 20°C and as little as 4–6 minutes at 45°C. Resistance

: Exhibits excellent resistance to chloride and sulfate ions, as well as general chemical and UV exposure. Physical Properties

: Features a specific gravity of 1.28 g/cm³ and a solids content by weight of 53%. Safety and Handling (MSDS Summary) Nitocote PE135 Safety Data Sheet (SDS) provides critical instructions for safe handling: Health Hazards

: The product is corrosive to the skin and can cause serious eye damage. Inhalation of high concentrations may irritate or damage the respiratory system, and it is toxic if swallowed. Protective Measures

: Always wear protective gloves, clothing, and eye/face protection (P280).

: If skin contact occurs, wash immediately with plenty of water (P302+P352). If eye contact occurs, rinse cautiously with water for several minutes and remove contact lenses if present. Storage and Disposal

: Store in a locked area (P405) and dispose of contents/containers in accordance with national regulations (P501).

For full technical documentation, you can refer to the official Fosroc Product Page or download the detailed Safety Data Sheet via Scribd. or a comparison with other Nitocote variants like the PU Aliphatic version? Nitocote PE135 - Fosroc

Nitocote PE135 is a single-component, high-performance protective coating based on hydrophobic polyester resin. Designed by Fosroc, it serves as an eco-friendly barrier for concrete substrates, offering exceptional resistance to chemical exposure and abrasion.

Understanding the Material Safety Data Sheet (MSDS)—now more commonly referred to as the Safety Data Sheet (SDS)—is critical for ensuring the safe handling, application, and storage of this product. Core Properties & Chemical Composition

As per the Nitocote PE135 Safety Data Sheet, the product is a grey, viscous liquid miscible with water. It is formulated to be free from hazardous materials like coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Key Ingredients (SDS Section 3): Talc (5–10%): Can cause eye irritation (H319).

Silica Flour (1–5%): Associated with eye irritation and respiratory system irritation (H335).

Formaldehyde (<1%): Present in trace amounts; however, it is classified as a skin sensitizer and suspected carcinogen in concentrated forms. Hazard Identification (SDS Section 2)

While Nitocote PE135 is generally marketed as non-toxic and eco-friendly, the Safety Data Sheet from Scribd notes several health hazards:

Skin Contact: Corrosive to skin and may cause sensitization or allergic reactions in sensitive individuals. Eye Contact: Causes serious eye damage. Inhalation: May cause respiratory system irritation. Ingestion: Classified as toxic if swallowed. Safe Handling and Personal Protection (SDS Section 8) Nitocote PE135 Safety Data Sheet (SDS) identifies the

To mitigate risks, users should follow the exposure controls detailed in the Fosroc Nitocote PE135 Guidelines: Fosroc Nitocote PE135 Technical Datasheet - Scribd

Nitocote PE135 Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), provides critical information for the safe handling and application of this hydrophobic polyester resin coating.

The following summary is based on standard safety documentation from and technical data. Product Overview

Nitocote PE135 is a single-component, grey liquid coating used for the chemical and abrasion protection of concrete. Petrolinetech

Underground protection, foundations, and as a combined protective coating and curing compound. Physical Properties: It has a specific gravity of approximately 1.23 to 1.28 20 raised to the composed with power cap C and is miscible with water. Composition:

It is water-based and free from coal tar pitch, hydrocarbon solvents, and aromatic amines. Safety and Hazard Identification

While formulated to be more environmentally friendly than solvent-based alternatives, standard precautions are still required: Health Hazards:

May cause slight skin or eye irritation upon contact. Some formulations may contain trace amounts of formaldehyde, which is toxic if swallowed and can cause serious eye damage. Eco-Toxicity:

Generally not regarded as dangerous for the environment, though it is not readily biodegradable. Flammability: The product is non-flammable Safe Handling and First Aid Inhalation Move to fresh air immediately. Rinse mouth thoroughly with water; do not induce vomiting. Skin Contact Wash with soap and water or resin-removing cream. Do use solvents. Eye Contact

Rinse immediately with plenty of water and seek medical treatment. Application and Storage Personal Protection: Use gloves, safety goggles, and barrier creams.

Keep in original, tightly closed containers in a cool, dry place ( is less than 25 raised to the composed with power cap C ). The shelf life is typically

Wet material can be cleaned with water. If dried, mechanical removal (like a scourer) is necessary.

Dispose of waste via a licensed contractor according to local regulations. Avoid runoff into drains or sewers. Petrolinetech

For full regulatory compliance, always refer to the specific version of the SDS provided by the manufacturer at the time of purchase, as can be found on the Fosroc Technical Data portal or more details on application rates for specific project types? Nitocote PE135 - Fosroc

Nitocote PE135 is an eco-friendly, single-component protective coating and curing compound based on hydrophobic polyester resin. It is designed to provide corrosion, chemical, and abrasion resistance for concrete substrates. Safety & First Aid (MSDS Summary)

The product is water-based and non-toxic, free from hazardous materials like coal tar pitch or aromatic amines. Inhalation: Move to fresh air; may cause minor irritation.

Skin Contact: Wash thoroughly with soap and water; may cause irritation. Eye Contact: Rinse immediately with plenty of water. Ingestion: Rinse mouth with water.

Fire: Not flammable; use extinguishing media suitable for surrounding fires.

Spillage: Soak up with water and wash down immediately while still damp. Technical Specifications Property Specific Gravity Solids Content (Weight) Complete Cure 7 days @ 25°C Adhesion Strength 1.5 N/mm² UV Resistance Stable; no undue change in color Application Guidelines Nitocote PE135 Data Sheet | PDF - Scribd

Nitocote PE135 is a single-component, water-based protective coating based on hydrophobic polyester resin. According to the Fosroc Nitocote PE135 Technical Datasheet, the product is non-toxic, eco-friendly, and free from hazardous materials such as coal tar pitch and hydrocarbon solvents. Safety & Hazard Summary

Classification: Generally classified as non-hazardous and non-toxic for standard use.

Skin Contact: May cause an allergic skin reaction or irritation in sensitive individuals. Eye Contact: Can cause serious eye irritation.

Environment: Some safety sheets indicate it contains substances harmful to aquatic life with long-lasting effects. First Aid Measures

Inhalation: Remove the person to fresh air. Seek medical attention if symptoms persist.

Skin Contact: Wash immediately with soap and plenty of water. Do not use solvents.

Eye Contact: Flush immediately with plenty of clean water for at least 15 minutes and seek medical treatment.

Ingestion: Rinse mouth. Do not induce vomiting; seek medical help immediately. Handling & Storage

Protective Equipment: Wear gloves, safety goggles, and protective clothing during application. SECTION 2: HAZARDS IDENTIFICATION 2

Ventilation: Ensure adequate ventilation, especially when used in confined spaces.

Storage: Store in a cool, dry, well-ventilated area in original containers at temperatures below 25°C. Nitocote PE135 - Fosroc

Understanding Nitocote PE135: A Comprehensive Guide to its MSDS and Safety Protocols

Nitocote PE135 is a specialized eco-friendly, protective coating based on rubberized bitumen emulsion. Widely used in the construction industry for waterproofing and protecting concrete structures, understanding its Material Safety Data Sheet (MSDS)—now more commonly referred to as the Safety Data Sheet (SDS)—is essential for ensuring onsite safety and regulatory compliance.

Whether you are a site engineer, a safety officer, or a waterproofing contractor, this guide breaks down the critical components of the Nitocote PE135 MSDS. 1. Product Identification and Chemical Properties

Nitocote PE135 is a single-component, grey or black liquid coating. Unlike traditional bitumen products that rely on heavy solvents, PE135 is water-based.

Primary Ingredients: Bitumen, synthetic rubber latex, and water.

Key Feature: Low VOC (Volatile Organic Compounds), making it suitable for use in confined spaces or poorly ventilated areas compared to solvent-based alternatives. 2. Hazard Identification

According to standard SDS protocols, Nitocote PE135 is generally classified as non-hazardous under normal conditions of use. However, "non-hazardous" does not mean "no precaution needed." Eye Contact: May cause slight irritation or redness.

Skin Contact: Prolonged exposure may lead to mild irritation or drying of the skin.

Ingestion: Low oral toxicity, but may cause gastrointestinal irritation if swallowed.

Inhalation: Minimal risk due to its water-based nature, though concentrated vapors in extremely tight spaces should be avoided. 3. First Aid Measures

If an accident occurs during application, the MSDS outlines these immediate steps:

Eyes: Flush immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.

Skin: Wash affected areas with soap and water. Do not use solvents or thinners to remove the product from the skin. Inhalation: Move the person to fresh air.

Ingestion: Do not induce vomiting. Rinse mouth with water and seek medical advice. 4. Fire-Fighting and Accidental Release

Since Nitocote PE135 is water-based, it is non-flammable in its liquid state. However, if the water evaporates, the remaining bitumen residue can burn. Extinguishing Media: Use water spray, foam, powder, or CO2.

Spillage: Contain the spill with sand or earth. Prevent the material from entering drains or watercourses, as bitumen can be harmful to aquatic life. 5. Handling and Storage To maintain the product’s integrity and ensure safety:

Storage: Keep containers tightly closed in a dry, cool, and well-ventilated place. Protect from frost (freezing can ruin the emulsion) and direct sunlight.

Handling: Wear appropriate Personal Protective Equipment (PPE) to avoid direct contact. 6. Exposure Controls and Personal Protection (PPE)

When working with Nitocote PE135, the following PPE is recommended:

Hand Protection: Chemical-resistant gloves (Nitrile or PVC).

Eye Protection: Safety goggles or face shields to prevent splashes. Body Protection: Protective overalls and safety boots.

Respiratory Protection: Not typically required under normal outdoor or well-ventilated conditions. 7. Ecological and Disposal Considerations

While Nitocote PE135 is more environmentally friendly than solvent-based coatings, it is still a chemical product.

Disposal: Dispose of waste and empty containers in accordance with local environmental regulations. Do not pour excess product into the soil or sewage systems.

The Nitocote PE135 MSDS highlights that while the product is a safer, water-based alternative to traditional waterproofing, standard industrial hygiene is required. Always refer to the specific document provided by Fosroc (the manufacturer) for the most current version, as formulations and local regulations can change.

SECTION 2: HAZARDS IDENTIFICATION

2.1 Classification of the Substance or Mixture (GHS)

  • Flammable Liquids: Category 3 (Flammable liquid and vapour).
  • Skin Corrosion/Irritation: Category 2 (Causes skin irritation).
  • Serious Eye Damage/Eye Irritation: Category 2A (Causes serious eye irritation).
  • Skin Sensitization: Category 1 (May cause an allergic skin reaction).
  • Specific Target Organ Toxicity (Single Exposure): Category 3 (May cause respiratory irritation; Narcotic effects).

2.2 Label Elements

  • Signal Word: Warning
  • Hazard Statements (H):
    • H226: Flammable liquid and vapour.
    • H315: Causes skin irritation.
    • H317: May cause an allergic skin reaction.
    • H319: Causes serious eye irritation.
    • H335: May cause respiratory irritation.
    • H336: May cause drowsiness or dizziness.
  • Precautionary Statements (P):
    • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P280: Wear protective gloves/protective clothing/eye protection/face protection.
    • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
    • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

  • Appearance: Viscous liquid (Various colors).
  • Odour: Characteristic solvent odour.
  • Flash Point: Approx. 23°C – 60°C (Depending on solvent mix).
  • Relative Density: 1.2 – 1.4 g/cm³.
  • Viscosity: Thixotropic paste/liquid.
  • Solubility: Immiscible with water; miscible with organic solvents.

Handling and storage

  • Handling: Use with adequate ventilation; avoid inhalation, skin and eye contact. Use grounded equipment and bonding when transferring liquids to prevent static discharge. Do not eat, drink or smoke while handling.
  • Storage: Store in cool, dry, well-ventilated area away from heat, open flames, strong oxidizers and acids. Keep containers tightly closed and upright. Follow manufacturer temperature limits.

Section 12: Ecological information

  • Toxic to aquatic organisms. Prevent entry into drains or groundwater.

Firefighting measures

  • Suitable extinguishers: Foam, dry chemical (ABC), CO2, water fog.
  • Unsuitable extinguishers: Straight water jet (may spread burning product).
  • Hazardous combustion products: Carbon oxides, nitrogen oxides, amines, other toxic fumes.
  • Special precautions: Use self-contained breathing apparatus (SCBA) and full protective gear.