Nokia 105 Ta-1174 Flash Tool Download | |best|

If your Nokia 105 (2019) model TA-1174 is stuck on the logo, experiencing boot loops, or requires a security code reset, flashing the original firmware is the standard solution. This process requires three specific components: the correct flash tool, the TA-1174 flash file, and the proper USB drivers. Quick Download Links

You can find the necessary files on several reputable mobile firmware repositories. The TA-1174 typically uses the Spreadtrum (SPD) SC6531EFM chipset, though some variants may require Miracle Box or Miracle Tool specifically.

Firmware & Tool Package: Official TA-1174 stock ROM packages often include the flashing tool and drivers. Sites like FirmwareFile and Android Data Host provide verified zip packages. nokia 105 ta-1174 flash tool download

Flash Tool Only: For this model, the Miracle Tool (v2.82 or later) or the Avenger Spreadtrum Module are highly recommended for stable results.

USB Drivers: Ensure you have the SPD (Spreadtrum) USB Drivers installed so your Windows PC can recognize the phone in "Boot Mode". Flash File Details Specification Model Nokia 105 2019 (TA-1174) Chipset Unisoc/Spreadtrum SC6531EFM Flash File Type .bin or .pac File Size Approx. 2.43 MB to 2.73 MB Step-by-Step Flashing Guide If your Nokia 105 (2019) model TA-1174 is

How To Flash Nokia 105 TA-1174 Mobile: Step 1 ... - Facebook

Steps:

  1. Install SPD USB drivers → Reboot PC.
  2. Extract Research Download Tool (RDT) → Run ResearchDownload.exe as Admin.
  3. Load firmware package:
    Click Load Pack → Select the .pac file for TA-1174.
  4. Configure settings:
    • Check Download (not Format All unless needed).
    • Port → select USB.
    • Baud rate → 921600 (default).
  5. Prepare phone:
    Power OFF Nokia 105 completely.
  6. Start flashing:
    Click Start Downloading → Now connect the powered-off phone via USB.
    Phone will auto-detect and start flashing.
  7. Wait for green PASS (approx. 2–3 minutes).
  8. Disconnect → Power ON phone (first boot takes 3–5 minutes).

Typical flashing procedure (decisive, generic steps)

  1. Install drivers and reboot PC if needed.
  2. Launch the chosen flash tool as Administrator.
  3. In the tool, load the firmware package (scatter file / loader or the image file per tool's requirement).
  4. Ensure preselected partitions (or “Format” options) match the firmware instructions — do NOT format user NV/IMEI if you must preserve IMEI.
  5. Power off phone. Remove battery if the phone uses removable battery and the tool instructions require it; otherwise leave as instructed.
  6. Connect phone to PC via USB when the tool prompts (or hold required key combo for forced download mode).
  7. Start the flash process and wait — do not disconnect until the tool reports success.
  8. After completion, disconnect and boot device. First boot may take several minutes.

2. USB Drivers Required

Before flashing, install the Unisoc/Spreadtrum USB drivers: Steps:

Download:
SPD USB Drivers for Windows 10/11

4. Install USB drivers (Windows)

  1. Install MediaTek USB VCOM drivers (search for “MTK USB driver 2024”).
  2. Disable Driver Signature Enforcement on Windows 10/11 (Google steps).
  3. Connect phone while off → device should appear as “MediaTek PreLoader USB VCOM Port” in Device Manager.