Nokia Ta1423 Flash File ((full)) Download Fix May 2026

I understand you're looking for help with the Nokia TA-1423 (a model in Nokia’s budget C-series, likely the Nokia C2 2nd Edition or similar) and need a flash file (firmware/stock ROM) to fix a software issue.

Here’s a straightforward, safe guide to finding and using the correct flash file without damaging your device. nokia ta1423 flash file download fix

Tools You Need for the Fix

You cannot flash a Nokia TA1423 with just a USB cable. You need specific software and drivers. I understand you're looking for help with the

  1. SP Flash Tool (Version 5.2116 or higher): Required for Unisoc chipsets. Note: The older "Smart Phone Flash Tool" doesn't work well with TA1423.
  2. Unisoc/Sprd USB Drivers: Windows will not recognize the phone in "Download Mode" without these.
  3. LibUSB Filter (For Windows 10/11): Sometimes required to switch the driver from ADB to USB Compositor.
  4. A Windows PC (7, 8, 10, or 11): Mac/Linux are not supported.
  5. A Good Quality USB Cable: The data cable that came with the phone is best. Cheap charging cables will fail.

What you can do instead:

❌ Common Errors & Fixes

| Error | Fix | |-------|-----| | BROM ERROR: S_BROM_CMD_STARTCMD_FAIL | Reinstall SPD drivers, try different USB port, use USB 2.0. | | PAC file mismatch | Wrong firmware version – download correct TA1423 build. | | Phone not detected | Hold Vol keys firmly. Try Vol- only or Vol+ only. Also try no buttons – just connect. | | Download fails at 98% | Uncheck “Backup NV” in settings and retry. | | DA error | Use a different version of ResearchDownload (v5.1916 or v5.2148). | Tools You Need for the Fix You cannot

Advanced Fix: Recovering IMEI (Network Fix)

If you flashed using "Format All + Download", your Wi-Fi might work, but your cellular network won't. Here is the fix:

  1. Dial *#*#3646633#*#* to enter Engineer Mode (MTK) or use *#*#83781#*#* for Unisoc.
  2. Go to Connectivity > CDS Information > Radio Information > Phone 1.
  3. Type AT+EGMR=1,7,"YOUR_IMEI_1" and press Send.
  4. For SIM 2: AT+EGMR=1,10,"YOUR_IMEI_2".
  5. Reboot. The signal bars will return.

You can find your IMEI on the original box or under the phone's battery sticker.

⚠️ Before You Begin: Important Notes