What you need:
norton.ghost.15.0.xxxx.iso)Step 1: Prepare the USB drive
Win + R and type diskmgmt.msc).Step 2: Create a bootable UEFI USB drive
Step 3: Configure the UEFI settings
F2, F12, or Del).Step 4: Boot from the USB drive and run Norton Ghost
Links:
If you need to download Norton Ghost or Rufus, here are the official links:
Tips:
Creating a bootable ISO for Norton Ghost on modern UEFI systems is a common challenge because the original Norton Ghost (specifically versions up to 15) was primarily designed for legacy BIOS and MBR (Master Boot Record) partition schemes. While technically discontinued in 2013, the tool remains a favorite for its "ignore bad sectors" feature and reliable disk cloning capabilities. Compatibility and Limitations
Original Norton Ghost (v15 and older): These versions do not natively support UEFI/GPT systems. If you must use them on modern hardware, you typically have to enable Legacy Boot or CSM (Compatibility Support Module) in your BIOS settings.
Symantec Ghost Solution Suite (GSS): This is the modern professional successor. GSS 3.3 and later versions natively support UEFI, GPT, and even Secure Boot for creating and restoring images. How to Create UEFI-Bootable Ghost Media
If you are using the older ISO files, they are often just backup files and not inherently bootable on their own; you need a bootable environment to run the Ghost executable. 1. Using Ghost Solution Suite (The Official Way) Ghost version compatible with UEFI? | IT Management Suite
Norton Ghost systems, you generally need to move away from the classic DOS-based versions and use a WinPE-based environment. Traditional Norton Ghost (pre-v12) was designed for BIOS/MBR and does not natively support booting from UEFI without legacy mode enabled [5.7, 5.9].
Deep Guide: Creating a UEFI-Compatible Norton Ghost Boot USB Prepare the USB Drive (FAT32 is Mandatory) UEFI systems require bootable USB drives to be formatted in
. They cannot boot from NTFS partitions in native UEFI mode [5.5, 5.24]. Command Prompt as Administrator and use norton ghost iso uefi link
list disk select disk X (replace X with your USB number) clean create partition primary format fs=fat32 quick active assign exit Use code with caution. Copied to clipboard Generate or Source the ISO
Since Norton Ghost was discontinued in 2013 [5.29], you must use Ghost Solution Suite (GSS) 3.x or later for reliable UEFI support [5.19]. Ghost 64-bit: Ensure your ISO contains ghost64.exe
. The standard 32-bit version may fail on 64-bit UEFI environments unless using a specific 32-bit WinPE [5.14]. WinPE 4.0+: Your ISO must be built on
(Windows 8) or higher to handle the EFI System Partition (ESP) and GPT disk structures [5.15]. Flash the ISO to USB Use a tool like Select your Ghost ISO, set the Partition scheme Target system UEFI (non CSM) Booting & Imaging Procedures BIOS Settings: You must often Disable Secure Boot
in your BIOS/UEFI settings to allow the unauthorized Ghost/WinPE environment to boot [5.7]. Capturing Images:
Use the command line for best results. To capture a UEFI system, you must capture the entire disk, or at minimum, the EFI partition and the Windows partition separately [5.15]. Restoring Images: ghost64.exe executable from the WinPE command prompt [5.14]. Legacy Support & Alternatives Legacy Mode: If your hardware allows it, enabling Legacy Boot (CSM)
in BIOS allows you to use older Norton Ghost ISOs (like v11.5), but this will only work for MBR-style disks [5.7, 5.9]. Modern Alternatives: Because Ghost is legacy software, many experts recommend AOMEI Backupper [5.2, 5.17] or Clonezilla
[5.26], which offer native, updated support for GPT/UEFI and Secure Boot without complex workarounds. ghost64.exe to automate the UEFI restoration process?
Norton Ghost is a legacy disk-cloning tool that has been largely discontinued by Symantec (now Broadcom). While early versions like Norton Ghost 11.5 and 15.0 are still available via archive sites, they lack native, reliable support for modern UEFI/GPT systems without significant workarounds. Norton Ghost ISO & UEFI Availability
Official support for Norton Ghost ended years ago, so there are no official modern "UEFI-ready" ISO links from Symantec.
Archive Sources: You can find legacy ISOs on sites like Internet Archive (e.g., Norton Ghost 11.5 DOS Boot) or Uptodown (Ghost 15.0).
UEFI Limitation: Standard Norton Ghost 11.5/15.0 ISOs are often built on DOS or older WinPE environments that only boot in Legacy BIOS mode. To use them on a modern PC, you often must enable Legacy Boot or CSM in your BIOS settings.
Custom WinPE ISOs: Some community-created ISOs, such as those found on Internet Archive, use a Windows 10 PE environment to run Ghost 12.0, which has better compatibility with newer hardware. How to Create a UEFI Bootable USB for Ghost
If you must use Ghost on a UEFI system, you need to create a bootable USB that supports the UEFI partition scheme. What you need:
Obtain the ISO: Download a Ghost ISO or extract the files from a Ghost installation. Use Rufus: Open Rufus and select your USB drive. Partition Scheme: Choose GPT. Target System: Choose UEFI (non-CSM).
Boot from USB: Insert the drive into the target PC. If it fails to boot, you may need to Disable Secure Boot in your BIOS/UEFI settings.
Known Issues: Restoring a UEFI/GPT image using older Ghost versions often results in "Internal Error 36000" because the software cannot correctly handle the GPT partition table. Recommended Modern Alternatives
Because of these compatibility hurdles, industry experts generally recommend modern tools that natively support UEFI, GPT, and Secure Boot. How to Create A Bootable Norton Ghost USB Drive
Creating a bootable Norton Ghost ISO for UEFI systems can be tricky because the original retail version of Norton Ghost was discontinued in 2013 and does not natively support modern UEFI/GPT partition schemes. However, you can still achieve this by using the updated Ghost Solution Suite or creating a specialized WinPE bootable drive. Core Requirements for UEFI Booting
Version: You must use Ghost 12 or higher (found in Ghost Solution Suite 3.x), as older versions like Ghost 11.5 or 15 often fail to recognize UEFI boot variables.
Architecture: Use the 64-bit executable (ghost64.exe) to ensure compatibility with 64-bit UEFI environments.
Format: The USB drive must be formatted as FAT32 to be recognized by UEFI BIOS. How to Create a UEFI-Compatible Boot USB
The most reliable method is to create a Windows PE (WinPE) boot disk that contains the Ghost executables:
Prepare the Environment: Install Ghost Solution Suite to access the Ghost Boot Wizard. Run the Boot Wizard: Select WinPE as the PreOS. Choose Standard Boot Package. Under "Destination Drive," select your USB Disk. Manual Creation (Alternative): Format a USB drive to FAT32. Use a tool like Rufus to create a bootable WinPE drive. Manually copy ghost64.exe onto the drive. UEFI BIOS Settings
To boot from your newly created drive, you may need to adjust your PC's BIOS settings: How to Create A Bootable Norton Ghost USB Drive
This guide outlines how to prepare, create, and use a Norton Ghost ISO for UEFI-based systems, utilizing tools to bridge the gap between legacy imaging software and modern boot architectures.
Note: Norton Ghost was discontinued in 2013. The methods below rely on the final versions (11.5/15) or Ghost Solution Suite, which can operate within a Windows PE environment to support UEFI. 1. Prerequisites Norton Ghost ISO:
A bootable Ghost ISO (e.g., Symantec Ghost 11.5.1 or Ghost Boot CD v12). USB Drive: At least 1 GB (minimum). Imaging Tool: (recommended) or RMPrepUSB. 2. Creating a UEFI-Compatible Bootable USB Norton Ghost ISO file (e
Traditional Ghost DOS boot disks will not work on UEFI systems. You must use a WinPE-based ISO to ensure UEFI boot compatibility. Download/Acquire ISO:
Use a version that includes WinPE (e.g., Symantec Ghost Boot CD 12.0). Open Rufus: Connect your USB drive and run Configure Rufus: Select your USB Drive. Boot Selection: Choose the Norton Ghost ISO file. Partition Scheme: (for UEFI). Target System: UEFI (non CSM) File System: to burn the image to the USB. 3. Alternative: Ghost Solution Suite (Best for UEFI)
If you have access to Ghost Solution Suite 3.x, it natively supports creating UEFI boot media. Broadcom Community \Program Files (x86)\Symantec\Ghost\Bootwiz BootWiz.exe Create a new configuration using Windows PE 10
Select the USB drive as the destination to create a natively supported UEFI boot stick. Broadcom support portal 4. Booting and Using Ghost on UEFI How to Create A Bootable Norton Ghost USB Drive
Creating or providing direct download links for Norton Ghost ISOs is generally not possible for an AI assistant due to copyright restrictions and safety policies. Symantec (now Broadcom) discontinued Norton Ghost in 2013, and official distribution channels have been shut down. Consequently, any "Norton Ghost ISO" links found online are unauthorized, often hosted on third-party file-sharing sites, and may pose security risks (such as malware).
However, here is important technical information regarding the "UEFI" aspect of your request, which explains why the standard Norton Ghost ISO is difficult to use with modern computers:
If you absolutely must use a Ghost ISO on a UEFI system, you have two difficult options:
ghost32.exe or ghost64.exe) into this environment. This creates a custom ISO that boots in UEFI mode and runs Ghost. This requires significant technical skill.If you’ve found yourself typing “Norton Ghost ISO UEFI link” into a search engine, you likely belong to a specific generation of IT pros or advanced hobbyists. You remember the golden age of disk cloning—when a single bootable CD could save an entire lab of Windows XP machines.
But here’s the hard truth: Norton Ghost is dead, and even if you find an ISO, it will not work properly with modern UEFI systems.
Let’s break down what this search term means, why it’s a security and compatibility minefield, and what actually works in 2025.
.tib and some older .gho files via its universal restore.While Macrium has recently retired their "Free" version for new downloads, it remains one of the most reliable tools for UEFI cloning. Older free installers are widely available and legal for personal use if you can find them on reputable software archives.
list diskselect disk Xcleanconvert mbr.gho image.Where to get a WORKING, legal Norton Ghost ISO?
Let’s be blunt: The only “links” that offer a modern Norton Ghost ISO are malicious. Cybercriminals know old-timers search for this. They package:
ghost_uefi.isoEven if the file is a genuine old ISO, you will be booting an unpatched, 2013-era DOS/PE environment with known vulnerabilities. On a modern network, that’s a disaster.