Official Leagoo Kiicaa Power T591 T592 Firmware- Custom Rom- Root Twrp

Modding the Leagoo KIICAA Power (models T591 and T592) involves specific steps and files tailored to each hardware revision. Both versions are based on the MT6580 chipset. Official Firmware

Firmware for this device is split by hardware revision. Flashing the wrong one can lead to display issues (e.g., a "white screen").

T591 Revision: Multiple official builds exist, including updates from late 2017 to early 2018 (e.g., version 20180131).

T592 Revision: Designed for newer screens. Specific firmware builds and "all-in-one" packs are available for this revision to ensure display compatibility.

Flashing Tool: Use SP Flash Tool (v5.1528 or newer recommended) on Windows with the correct MT6580 Android Scatter file. Custom ROMs

Most custom ROMs are ported from other MT6580 devices. Note that some are revision-specific: Modding the Leagoo KIICAA Power (models T591 and

AOSP/Pixel Styles: Pixel Custom Rom, Android 7.1.1 (by rozetkin), and Viper OS. OEM Ports: MIUI 9 mod, HiOS, and MyOS ports.

Other Options: Resurrection Remix (RR 5.8.5), Redux, and Freeme OS.

Installation: These typically require a custom recovery like TWRP and may need specific patches for T592 screen support. TWRP & Rooting

You must unlock the bootloader before attempting to flash a custom recovery or root the device.

TWRP Recovery: TWRP 3.1.0 is the standard for both models. Use the 4PDA Leagoo KIICAA Power thread to find the exact recovery.img for your revision (T591 vs. T592). Rooting Method: Extract the stock ROM ZIP to a folder

Flash TWRP via SP Flash Tool using the "Download Only" mode.

Boot into TWRP immediately (usually Power + Volume Up) to prevent the stock system from overwriting it.

Flash the SuperSU or Magisk zip file through the TWRP "Install" menu. Important Fixes

NVRAM Errors: If you lose your IMEI or see "NVRAM WARNING: Err = 0x10," you will need to restore nvdata and nvram files specific to your revision.

DM-Verity: If the device refuses to boot after flashing, you may need to flash a "no-verity-opt-encrypt" zip to disable boot image verification. Leagoo KIICAA Power - Прошивки - 4PDA If your phone is bricked (black screen, no

Step-by-Step: Flashing Stock Firmware

Warning: This will wipe all data. Backup your photos and files.

  1. Extract the stock ROM ZIP to a folder.
  2. Launch SP Flash Tool as Administrator.
  3. Click Scatter-loading and select the MT6737_Android_scatter.txt file.
  4. Ensure Download Only mode is selected (never use “Format All + Download” unless reviving a dead device).
  5. Power off your Leagoo KIICAA Power completely. Remove battery (if possible) then reinsert.
  6. Click Download in SP Flash Tool.
  7. Connect the phone via USB. The flash process should start automatically.
  8. Wait for a green checkmark. Disconnect and boot the phone (first boot takes 5–10 minutes).

If your phone is bricked (black screen, no response): Use “Format All + Download” but you will lose IMEI. You must have a backup of your NVRAM.

Specifications (Reference):

Part 1: Official Firmware (Stock ROM)

If your device is stuck in a bootloop, suffering from "Camera Failed" errors, or you simply want to revert to the factory state, flashing the Official Stock Firmware is the solution.

Part 4: Installing TWRP Recovery on Leagoo KIICAA Power

TWRP (Team Win Recovery Project) is the gateway to custom ROMs, root, and full system backups.

Alternative: SuperSU (Legacy – Not Recommended)

SuperSU works but is outdated and less secure on modern Android. Only use if Magisk fails.

Root Verification: Install Root Checker from Play Store.

3. Custom ROM Review

If you are searching for Custom ROMs to breathe new life into this phone, prepare for disappointment.