Owon Hds2102s Firmware Update -

The OWON HDS2102S is a handheld 2-channel 100 MHz oscilloscope with a built-in multimeter (DMM). Firmware updates for this model are not distributed through an automatic online updater; you must manually download and install them via USB.

Below is the full feature set and process for the HDS2102S firmware update, including prerequisites, step-by-step instructions, and what the update typically improves.

Step 1 – Prepare USB Drive

1. Format USB drive as FAT32.
2. Copy the firmware file (e.g., HDS2102S_Vxx.upg) to the root directory of the USB drive.
3. Do not rename the file.

Guide: Updating Firmware on the OWON HDS2102S Handheld Oscilloscope

The OWON HDS2102S is a popular handheld oscilloscope known for its dual-channel input, built-in multimeter, and portability. Like most modern test equipment, OWON periodically releases firmware updates to fix bugs, improve stability, and occasionally add new features.

Updating the firmware on the HDS2102S is a relatively straightforward process, but it requires careful attention to detail to avoid "bricking" the device. Here is a step-by-step walkthrough. owon hds2102s firmware update

1. Preparation & Prerequisites

Before you begin, ensure you have the following items ready:

• The OWON HDS2102S unit (fully charged is recommended).
• A USB cable (Standard USB-A to Mini-USB, usually supplied with the unit).
• A Windows PC (The update utility is typically Windows-only).
• Internet access to download the firmware file.

Part 4: Step-by-Step Firmware Update Procedure

This is a delicate process. The HDS2102S uses a U-boot loader system via USB-A port (not the USB-C charging port).

Part 8: Frequently Asked Questions

Preparation

1. Check Current Firmware Version: Before you start, it's a good idea to check the current firmware version of your HDS2102S. Navigate to the "Utility" or "System" menu on your device to find this information. The OWON HDS2102S is a handheld 2-channel 100

2. Download the Latest Firmware: Visit the official Owon website or contact their support to find and download the latest firmware for the HDS2102S. Make sure to download the correct firmware version for your device.

3. Charge Your Device: Ensure your HDS2102S is fully charged or connected to a power source to prevent any interruptions during the update process.

4. SD Card or USB Drive: Prepare an SD card or a USB drive formatted to FAT16 or FAT32. The firmware update file usually comes in a .bin or a similar format. Step 1 – Prepare USB Drive

Q: Can I update via the USB-C port?

A: No. The USB-C is for charging and PC data streaming (SCPI commands) only. It cannot act as a USB host for firmware.

Part 3: Finding the Correct Firmware File

OWON does not host all firmware versions on their main product page. You need to know where to look.