Parashara Light 9.0 Hardware Key Not - Found _top_

The "Hardware Key not Found" error in Parashara's Light 9.0 typically occurs when the software cannot detect the required USB dongle or its associated drivers. Common Solutions

Reinstall Dongle Drivers: This is the most frequent fix. If the dongle was plugged in during software installation, the drivers may not have initialized correctly. Unplug the USB dongle.

Find the Safenet Sentinel Pro Drivers folder (typically on your installation USB or in the download folder). parashara light 9.0 hardware key not found

Run the driver installer and restart your computer before plugging the dongle back in. Check Hardware Connections:

Try different USB ports on your computer to rule out a faulty port. The "Hardware Key not Found" error in Parashara's Light 9

Ensure the dongle is not connected through a USB hub or port replicator, as these can sometimes prevent proper recognition.

Verify Driver Presence: Open Device Manager on your Windows PC and look for the Sentinel driver under "Universal Serial Bus controllers" to confirm it is active. Step 2: Run as Administrator

Registration/Activation: If the hardware key is recognized but the software still asks for access, you may need to register your System ID via the Official Support Wizard to receive a manual password. Official Contact Information

If the steps above do not resolve the issue, contact GeoVision Software for technical support: Website: Parashara Support Email: sales@parashara.com Phone: 1-800-240-5444 (USA) or +91 11 2626 5122 (India)

"Hardware Key not Found" Message After New Install - IRRICAD

Step 2: Run as Administrator

• Right-click the Parashara Light 9.0 shortcut.
• Select Properties > Compatibility.
• Check Run this program as an administrator.
• Click OK and relaunch the software.

Solved: The "Parashara Light 9.0 Hardware Key Not Found" Error – Causes, Fixes, and Modern Alternatives

Step 4: Manually Start the Service

1. Press Win + R, type services.msc, and press Enter.
2. Scroll down to find Sentinel HASP License Manager or Hardlock Service.
3. If the status is not "Running," right-click it and select Start.
4. Double-click the service, set Startup type to Automatic, and click Apply.