Point-n-measure Digital Tape W5746 User Manual |link| (2026)
The Performance Tool W5746 Point-N-Measure is a 50-foot ultrasonic distance measurer designed for quick "rough-in" estimates, rather than high-precision construction. The device features automated area and volume calculations, a "freeze" function, and a laser pointer for targeting, aimed at simplifying DIY measurements. For more user perspectives and product details, visit POINT N MEASURE DIGITAL TAPE MEASURE CALCULATE ... - eBay
Master Your DIY Projects: The Point-N-Measure Digital Tape W5746 Guide
Tired of wrestling with metal tapes that snap back or sag over long distances? The Point-N-Measure W5746 is a game-changer for homeowners and pros alike. Whether you're measuring for new curtains or estimating flooring, this digital tool makes precision effortless. Here is everything you need to know to get started. 🛠 Getting Started: The Basics
Before your first measurement, ensure you have fresh batteries installed (typically 2x AAA).
Power On: Press the Power/Measure button. The LCD screen should light up instantly.
Choose Your Unit: Don't do math in your head. Use the Unit button to toggle between feet/inches, decimal feet, and meters.
Reference Point: This is crucial. Decide if you want to measure from the front of the device or the back (base). Look for the icon on the screen—measuring from the back is best for wall-to-wall distances. 📏 How to Measure Like a Pro The W5746 offers three main modes to handle any job:
Single Distance: Point the laser at your target and click the Measure button. The distance appears instantly.
Area Calculation: Hit the Mode button until you see the rectangle icon. Measure the length, then the width. The device automatically calculates the square footage—perfect for painting projects!
Volume: For HVAC or insulation work, use the cube icon. Measure length, width, and height to get the total cubic space. 💡 Pro Tips for Accuracy
Steady Hands: For long distances, rest the base of the W5746 against a flat surface to prevent "laser shake."
Target Surfaces: Lasers struggle with clear glass or mirrors. If you're measuring a window, stick a piece of painter's tape on the glass to give the laser a solid surface to hit.
Memory Function: Most W5746 models save your last few measurements. Use the Plus/Minus buttons to add multiple measurements together without a notepad. ⚠️ Quick Troubleshooting Point-N-Measure Digital Tape W5746 User Manual
Error Code? If you see an error, you might be too close (under 2 inches) or too far (over the max range). Check your batteries if the screen dims.
Laser Visibility: In bright sunlight, the red dot can be hard to see. Try using a target plate or measuring during "golden hour" for better visibility outdoors.
Ready to start your next project? The Point-N-Measure W5746 takes the guesswork out of the job so you can focus on the craftsmanship.
Should I add a troubleshooting table for specific error codes, or would you like to include a comparison section against traditional tape measures?
The Point-N-Measure Digital Tape (model W5746) has a standout feature: it combines a standard retractable steel tape (up to 16 ft) with a laser distance measurer (up to 50 ft) into one tool.
Here’s why that’s interesting in practice:
- Dual-measurement flexibility – You can pull out the physical tape for short, indoor, or edge-to-edge measurements, then switch to the laser for longer distances (ceilings, room widths) without walking end to end.
- Auto-locking tape – The blade locks automatically when pulled out and releases with a button, preventing slap-back.
- Laser reference points – It allows measuring from the front (laser origin near tape hook) or back of the unit, useful for corners or when the tape end can’t hook onto something.
- Digital readout on a large LCD – The display shows both laser and manual tape measurements, reducing misreading errors common on old-style tape rules.
- Inertial measurement – Some versions include a “rolling wheel” mode (via the end hook sensor) for curved or irregular surfaces.
If you need help with specific controls (e.g., how to switch from tape to laser, or resetting the digital display), let me know and I can break down those steps from the manual.
8. Troubleshooting
| Problem | Possible cause | Solution |
|---------|----------------|----------|
| Laser turns on, no reading | Target too reflective / dark | Use target plate or measure to non-reflective surface |
| Display shows Err 2 | Signal too weak | Stabilize device, measure from tripod or solid surface |
| Tape won't retract | Dirt or twist in blade | Gently pull out fully, wipe clean, guide back in |
| Display faint | Low battery | Charge using USB-C |
| Wrong units | Unit mode changed | Press UNIT until correct format appears |
11. Warranty & Support
Point-N-Measure provides a 2-year limited warranty against manufacturing defects. This does not cover damage from misuse, battery wear, or snapped tape blades.
Contact:
support@pointnmeasure.com
1-800-555-TAPE (8273)
www.pointnmeasure.com/w5746
Manual revision 2026-04-13. For latest updates, visit the product support page.
The Point-N-Measure Digital Tape W5746 is an electronic distance-measuring tool designed to simplify calculations for DIYers and contractors. Unlike standard metal tapes, this device uses ultrasonic or laser-guided technology to measure distances up to 50 feet. Core Functionality & Controls The Performance Tool W5746 Point-N-Measure is a 50-foot
The device features a digital display that provides measurements in inches, feet, and centimeters.
Standard Measurement: Place the base of the unit against a wall, aim the laser at the opposite target, and press the main measurement button to display the distance.
Area and Volume Calculations: The W5746 can automatically compute square footage (area) or cubic feet (volume) by measuring consecutive dimensions (length, then width, then height).
Memory & Storage: The unit includes a "freeze" or memory function to save a reading for later reference.
Auto Shut-off: To preserve its 9V battery, the device automatically powers down after five minutes of inactivity. Step-by-Step Operation
Power On: Turn the device on and select your preferred units (inches, feet, or centimeters).
Positioning: Ensure the ultrasonic/laser sensor is clear of obstructions. The measurement is typically calculated from the base of the unit. Targeting: Point the laser at the intended end-point.
Reading: Press the button to capture the distance. If calculating area, press the "Area" button and take a second measurement.
Clear/Reset: Hold the primary button to reset the display to zero before starting a new measurement. Key Specifications Max Range Power Source One 9V Battery (typically not included) Display Units Inches, Feet, Centimeters Primary Uses Square footage for flooring/paint, cubic feet for HVAC
How To Use A Digital Tape Measure | Engineer Supply - EngineerSupply
The Point-N-Measure Digital Tape W5746 (often listed as a Performance Tool product) is a legacy handheld laser distance measurer. While original digital manuals can be difficult to find due to the product's age, its core functions follow standard laser measuring protocols. Key Product Features
Measurement Range: Designed to measure interior dimensions up to 50 feet (15 meters). Dual-measurement flexibility – You can pull out the
Calculations: Automatically calculates length, area (square footage), and volume (cubic feet).
Display: Features an LCD screen that shows readings in both feet/inches and metric units.
Portability: Compact, pocket-sized design weighing approximately 4 ounces. How to Use (Standard Operation) Based on similar models and seller descriptions:
Targeting: Point the laser at the far wall or surface you wish to measure.
Measuring: Press the READ or MEASURE button. The distance should appear on the LCD screen.
Functions: Use the mode buttons (often labeled for Area or Volume) to toggle between simple distance and calculated square/cubic footage.
Placement: For accurate readings, ensure the base of the unit is flat against the starting wall. Quick Review: Pros & Cons
Reviews from secondary marketplaces and historical listings suggest a mixed performance: Pros:
Ease of Use: Simple "point and click" interface for quick room estimates.
Convenience: Good for DIY projects like measuring for paint or carpet without a helper. Cons:
Accuracy Limitations: Like many early sonic or basic laser measures, accuracy may vary, typically within 1/8 of an inch under ideal conditions.
Indoor Limitation: Primarily effective for interior use; laser visibility and accuracy drop significantly in bright sunlight.
Legacy Tech: Newer "2-in-1" models now offer physical tapes combined with lasers for better versatility. AI responses may include mistakes. Learn more Point-n-measure Digital Tape W5746 by Performance Tool 2004