Realme | C30s Imei Repair

I understand you're looking for information on IMEI repair for the Realme C30s. However, I must first provide an important disclaimer:

⚠️ Important Legal Notice:
Repairing or changing an IMEI number is illegal in most countries (including India, the UK, and under US law). IMEI numbers are unique device identifiers tied to the original hardware. Tampering with them can:

Legitimate IMEI issues (e.g., "null IMEI" after software corruption) should be resolved through official service centers or by restoring the device’s original firmware — not by "repairing" the IMEI as a number change.

Step 2: Installation

  1. Install the SPD Drivers on your PC.
  2. Disable Driver Signature Enforcement (Hold Shift + Restart > Troubleshoot > Startup Settings > Disable driver signature).
  3. Extract and run UniTool.exe as Administrator.

Method 1: The Official Meta Mode (Best for Unisoc/SPD Chipset)

Wait—Correction: The Realme C30S actually runs on a Unisoc T612 (not MediaTek). This makes it easier.

Here is the safest method using Unisoc Tool. realme c30s imei repair

Why does the Realme C30S lose IMEI?

Unlike older phones, the Realme C30S (MediaTek Helio G85) stores IMEI data in the NVRAM (Non-Volatile Random Access Memory). When you flash a "Format All + Download" ROM, you wipe the NVRAM. No NVRAM = No network.

Q4: My Realme C30s shows “Invalid IMEI” after a security update. What to do?

A: Roll back to the previous build using Realme’s official rollback package (if available), then repair IMEI, then update again.

2. Enable Developer Options & USB Debugging

Step-by-Step Guide:

Step 1: Download Maui Meta Tool v9.xxx (v9.2036 or newer). Extract the folder.

Step 2: Run MauiMETA_exe_v9.2036.exe as Administrator. I understand you're looking for information on IMEI

Step 3: Connect the Realme C30s in Meta Mode.

Step 4: In Maui Meta, click “Reconnect” (or press F8). The tool should show “Connected.”

Step 5: Click the “IMEI / NVRAM” tab (database file). Select Load DB. You must load the correct AP and BP database files from the Realme C30s stock ROM. These are .cfg or .bin files inside the target folder of the firmware.

Step 6: Uncheck “Dual IMEI” (if you only have one SIM) or check it for dual SIM. Legitimate IMEI issues (e

Step 7: Type your original IMEI in the “IMEI 1” and “IMEI 2” fields.

Step 8: Click “Download / Write to Flash.” Wait for “Pass” or “Write Success” in green.

Step 9: Disconnect, reboot the phone, and test.

Warning: Never write a random generated IMEI. Using an IMEI from another phone is illegal in many countries.

Step 4: Reset and Test

  1. Disconnect phone.
  2. Force restart (hold Power for 15s).
  3. Dial *#06# to verify IMEI.
  4. Test network connectivity.

❌ What to Avoid