Renolink 1.87 Install — Windows 10

Here’s a step-by-step guide to install Renolink 1.87 on Windows 10.

---

Title: Installation and Configuration Guide for Renolink 1.87 on Windows 10 for Renault, Dacia, and Nissan Diagnostics

Author: [Your Name/Institution] Date: [Current Date] Version: 1.0 Renolink 1.87 Install Windows 10

Renolink 1.87 vs. Newer Versions on Windows 10

| Feature | Renolink 1.87 | Renolink 1.95+ | |---------|---------------|----------------| | Windows 10 compatibility | Needs tweaks | Native support | | Renault ZOE (electric) | Limited | Full support | | Key programming | Yes | Yes | | Clone-friendly | Yes (crack available) | Not easily cracked | | Stability | Excellent | Good (requires activation) | Here’s a step-by-step guide to install Renolink 1

For most hobbyists, version 1.87 remains the best balance of functionality and cost. Title: Installation and Configuration Guide for Renolink 1

---

Step 3: Run the Renolink 1.87 Installer

1. Right-click Renolink_1.87_Setup.exe → Run as Administrator.
2. Language: Select English (or your preference).
3. Installation path: Keep default C:\Program Files (x86)\Renolink unless you have a specific reason to change.
4. Complete the installation – do not launch the software yet.

3.1 Disable Driver Signature Enforcement (for unsigned FTDI drivers)

Since Renolink 1.87 may rely on modified FTDI drivers, you must disable driver signature enforcement:

1. Hold Shift and click Restart.
2. Navigate to: Troubleshoot > Advanced Options > Startup Settings > Restart.
3. Press 7 or F7 to select Disable driver signature enforcement.

Step 5: Configure COM Port in Renolink

Renolink must know which COM port your interface uses.

1. Open the Renolink installation folder.
2. Locate Config.ini and open with Notepad.
3. Find the line: ComPort=3
4. Change the number to match the COM port from Device Manager (e.g., ComPort=4).
5. Save and close.

4. Install USB Drivers (FTDI)

• Connect your OBD interface to a USB port.
• Windows may auto-install drivers. If not:
  1. Download FTDI VCP drivers from FTDI chip website.
  2. Run CDM212364_Setup.exe as admin.
  3. After install, check Device Manager → Ports (COM & LPT) for USB Serial Port.

---

Step-by-Step: Renolink 1.87 Install on Windows 10

Now that your system is prepared, follow these exact steps.