Richmond 5v40-7 Water Heater Specs Free 🆒

Richmond 5V40-7 is a 40-gallon residential gas water heater, primarily recognized for its energy efficiency and compatibility with manufactured housing (mobile homes). While newer models have superseded it, this specific unit is noted for its durable porcelain-lined tank and steel burner assembly. Kyschools.us Core Specifications Nominal Capacity : 40 Gallons.

: Propane (LP) or Natural Gas (model-dependent, often convertible). Maximum Pressure : 150 PSI (standard working pressure). Ignition Type : Piezo ignition system (no matches required). Dimensions

: Approximately 25" Wide x 61" High (standard 40-gallon profile). Connections : 3/4" NPT water connections. The Home Improvement Outlet Performance & Features Recovery Rate : Typically around 21–30 GPH at a 90°F rise, depending on the specific gas input (BTU). First Hour Rating (FHR) : Provides roughly 45–63 gallons of hot water in the first hour of use.

: Glass-lined or porcelain-lined tank to prevent corrosion and extend service life.

: Standard anode rod installed to protect the tank from mineral-based decay. Certifications

: Often HUD-certified for manufactured housing and modular construction. Richmond Water Heaters Troubleshooting Common Issues

If you are experiencing issues with this specific model, standard diagnostic steps include: Pilot Light

: If the water stays cold, check the pilot flame. A weak or absent flame often points to a faulty thermocouple or a clogged pilot orifice.

: If the pilot is lit but the main burner does not engage, the gas control valve or thermostat may be faulty.

: Richmond recommends annual flushing to remove sediment and mineral deposits that can cause popping noises or reduced efficiency. JustAnswer Replacement Parts Most standard Richmond replacement parts remain compatible with this series: Use and Care Manual - Richmond Water Heaters

Richmond 5V40-7 is a 40-gallon tall natural gas water heater manufactured by Rheem. It is designed for residential use, featuring an energy-efficient burner and integrated safety systems for maintenance-free operation. Technical Specifications The following specifications are standard for the Richmond 5V40-7 Fuel Type: Natural Gas. Tank Capacity: 40 Gallons. Burner Input: 36,000 BTU/h.

Emissions Profile: Low NOx design (meets requirements of 40 ng/J).

Anode Rod: Premium-grade for extended tank protection against corrosion. Ignition: Easy-to-light system (does not require matches).

Safety Features: Includes an exclusive maintenance-free air/fuel shut-off device for added protection against flammable vapor ignition. Design and Performance Features

EverKleen™ System: A patented system designed to prevent sediment buildup, helping maintain efficiency and performance over time. richmond 5v40-7 water heater specs

Physical Profile: Identified as a "Tall" model, which typically offers a smaller footprint suitable for tight installation spaces in first-time or replacement scenarios. Warranty: Comes with a 6-year tank and parts warranty. Installation Context

Configuration: Usually features top water connections with a standard 3/4" size.

Safety Requirements: Must be kept clear of flammable materials like paint, gasoline, or solvents, as vapors can ignite near the burner.

Replacement: Uses standard replacement parts that are widely available.

Important Considerations Before Buying

Fuel type: Natural gas only. Not for LP/propane without conversion kit (check availability).
Venting: Requires existing 3" or 4" B-vent; not power vent.
Space: Ensure 6" minimum clearance for service at front; 59-3/4" height fits most closets.
Local codes: Check if 0.60 EF meets current regional standards (some areas now require 0.62+ EF).

Specifications may vary slightly by production year. Always verify with the rating plate on the actual unit before installation.

Richmond 5V40-7 is a 40-gallon propane (LP) gas water heater, primarily recognized as part of Richmond’s "Miser" high-input series. While it is an older model, it remains notable for its fast recovery times and durable construction designed for residential or mobile home use. Kyschools.us Core Specifications

Based on manufacturer data and historical listings, here are the primary technical specs for the (and its variants like the 5V40-7P): Tank Capacity : 40 Gallons. : Propane (LP) Gas. BTU Rating

: High-input design, typically around 36,000 to 40,000 BTU/hr depending on the specific sub-model configuration. Burner Material

: Durable stainless steel or precision-aligned aluminized steel for quiet operation. Tank Lining

: Porcelain-lined steel for corrosion resistance and extended tank life. Recovery Rate

: Recovery is approximately 2.5 times faster than standard electric units, providing a high volume of hot water quickly. Key Features Installation Ease

: Features a 4-hole top design (on the 5V40-7P) for easier access and faster plumbing connections. Safety Components

: Comes standard with a factory-installed Temperature and Pressure (T&P) relief valve. Mobile Home Compatibility

: Some versions, like the 5V40T or 5VR40T, are HUD-certified specifically for manufactured housing and mobile home installations. Richmond Water Heaters Maintenance and Troubleshooting Richmond 5V40-7 is a 40-gallon residential gas water

If you own this model and are experiencing issues, consider the following: JustAnswer Insufficient Hot Water : Check the gas control valve pilot flame . A weak pilot can prevent the main burner from igniting. Pilot Won't Stay Lit : This is often caused by a faulty or misaligned thermocouple , which signals the valve to keep gas flowing. Burner Cleaning

: Ensure the burner assembly is free of debris and the unit has proper ventilation to maintain efficiency. JustAnswer

For further details on installation or part replacement, you can refer to the Richmond Residential Gas Water Heaters Guide or download the Standard Use and Care Manual provided by Richmond Water Heaters or check the availability of replacement parts for this specific model?

40-Gallon Tall 40000 BTU Natural Gas Water Heater - 6 Year Warranty

40-Gallon Tall 40,000 BTU Natural Gas Water Heater - 6 Year Warranty | Reliance Water Heaters. www.reliancewaterheaters.com

The Richmond 5V40-7 is a legacy residential gas water heater. Manufactured under the Richmond brand (a subsidiary of the industry giant Rheem), this unit was highly popular in the 1990s and early 2000s. It was frequently sold through hardware retailers and regional propane dealers. 📋 Core Specifications

Because this model has been out of production for some time, the exact factory data sheets are archived. However, the alphanumeric model number breaks down its primary design traits:

Nominal Capacity: 40 Gallons (Ideal for households with 2 to 4 people).

Fuel Type: Typically configured for Propane (LP) Gas or Natural Gas (the "P" suffix usually denoted propane models).

Venting Type: Traditional Atmospheric Venting (requires a standard chimney or B-vent to draft exhaust naturally).

Burner Input: Standard 40-gallon atmospheric gas heaters of this specific generation usually feature an input of roughly 36,000 to 40,000 BTU/h.

Tank Lining: Porcelain glass-lined steel to protect the internal tank from aggressive hard water and corrosive elements.

Ignition System: Traditional standing pilot with a piezo igniter or manual match-lit pilot setup. ⭐ Key Features & Engineering

Despite its age, the 5V40-7 boasted several durable design choices that were considered high quality for its era: Important Considerations Before Buying

EverKleen™ Self-Cleaning System: Many high-spec Richmond models of this era utilized a specialized dip tube that swirled incoming cold water. This action aggressively fought sediment and lime build-up at the bottom of the tank, prolonging the life of the unit and maintaining heat transfer efficiency.

Rigid Foam Insulation: To combat standby heat loss, the tank was wrapped in a thick, dense layer of rigid foam. This prevented heat from radiating out of the tank when the burners weren't firing.

Fast Recovery Rate: Propane models boasted a fast recovery time compared to their electric counterparts of the same era, allowing a quick turnaround of hot water during peak usage hours.

Standard Safety Relief: Equipped with a standard side-mounted or top-mounted Temperature and Pressure (T&P) Relief Valve to prevent excessive pressure from building inside the tank. 🛠 Common Troubleshooting & Maintenance

If you are currently running a Richmond 5V40-7, you are operating an older system. Review these common issues and structural maintenance practices:

Pilot Light Outages: This is the most frequent call for this unit. If the unit fails to heat, the pilot light has likely blown out. If it refuses to stay lit after manual lighting, the thermocouple is likely worn out or covered in carbon and needs a replacement.

Sediment "Popping" Noises: If you hear knocking or popping sounds when the burner fires, it is a sign of scale and sediment resting on the floor of the tank. Hooking a hose to the bottom brass drain valve and flushing the unit is heavily recommended.

Anode Rod Checks: To prevent the tank from rusting through, check the sacrificial anode rod at the top of the tank. If it has completely dissolved, replace it immediately to extend the life of the metal tank. ⚠️ Important Considerations Richmond 5v40-7 Water Heater Q&A: Troubleshooting & Manual

Technical Specifications

Installation Requirements (Must-Know Before Buying)

Before purchasing a Richmond 5V40-7, verify the following:

Gas Supply

The unit requires 5.0" – 10.5" W.C. gas pressure. A undersized gas line (e.g., 1/2" over 50+ feet) will cause poor performance. For runs over 20 feet from the gas meter, consider a 3/4" supply line.

Key Specifications at a Glance

| Specification | Detail | |---------------|--------| | Model | 5V40-7 | | Tank Capacity | 40 gallons | | Energy Source | Natural Gas | | BTU Input | 40,000 BTU/h | | Recovery Rate | ~41 gallons per hour (at 90°F rise) | | First Hour Rating (FHR) | ~76 gallons | | Vent Type | Atmospheric / Natural draft | | Vent Size | 3 inches | | Energy Factor (EF) | ~0.59 – 0.61 (standard efficiency) | | Tank Diameter | 20 inches | | Height | ~60 inches (tall profile) | | Water Connections | 3/4″ NPT | | Gas Connection | 1/2″ NPT | | Anode Rod | Sacrificial (magnesium or aluminum/zinc) | | Warranty | 6-year limited (tank & parts) |

Overview

The Richmond 5V40-7 is a standard, residential electric storage water heater. It is part of Richmond’s "Essential" or value-tier lineup, designed to provide reliable hot water for households with moderate demand. With a 40-gallon capacity, this unit is typically rated for households of 2 to 3 people.

Richmond Water Heaters are manufactured by Rheem, a leader in the HVAC and water heating industry. Consequently, the 5V40-7 shares many components and engineering standards with the Rheem "Professional" or "Classic" series, offering a robust entry-level option for homeowners.