Rsba1 Version 2 License Key Updated New! -

To update your Icom RS-BA1 Version 2 software and ensure your license key remains active, follow these steps based on the latest official procedures from Icom Japan 1. Update vs. Upgrade Requirements Updates (e.g., v2.41 to v2.60): These are free and can be downloaded from the official Icom Support page. You must have a previous version of already installed on your PC. Upgrades (Version 1 to Version 2): no free upgrade

from the original RS-BA1 to RS-BA1 Version 2. You must purchase a new software package to obtain a Version 2 license key. 2. Locating Your License Key If you are reinstalling or updating, your Product ID License Key are required. They can be found on: attached to the CD/USB case. installation manual or a separate printed sheet included in the package. Icom explicitly states these keys will not be reissued

if lost, so you should back up the sticker or digital record immediately. 3. Updating to the Latest Version (Current: v2.60+) Access the latest firmware/software update from the Icom Japan Download Center Expand the downloaded file (e.g., Rsba1_up_ver260.zip Double-click Update.exe

while an older version of RS-BA1 Version 2 is still installed. Verification:

The update process typically preserves your existing license info, but you may be prompted to re-enter it during major reinstallations. 4. Troubleshooting License Errors Ip Remote Control Software Rsba1 Crack - Facebook

Setting up and updating the Icom RS-BA1 Version 2 software is a specific process that requires both a valid license key and careful configuration. This guide covers how to handle your license during installation and how to keep the software current.  1. Where to Find Your License Key 

Your license key and Product ID are essential for installation. These are unique codes provided at the time of purchase: 

Physical Media: If you purchased the software on a CD or USB flash drive, the license key and Product ID are typically found on a sticker attached to the case.

Digital Purchase: For digital versions, look for these details in your confirmation email from the authorized Icom dealer.

Important: Version 1 keys cannot be used to activate Version 2. Version 2 must be purchased as a separate software package.  2. Initial Installation & Activation  To activate your software for the first time: 

Run Setup: Insert your USB drive or CD and double-click setup.exe in the "RSBA1" folder. Accept Terms: Agree to the license agreement to proceed.

Enter Credentials: When the Product Information screen appears, enter your Product ID and License Key exactly as they appear on your sticker or in your email.

Install Virtual Drivers: During installation, Windows may prompt you to install "Icom Virtual Serial Driver" and "Icom Virtual Audio Device." Click Install or Continue for these, as they are required for the software to "talk" to your radio.  3. Updating to the Latest Version 

Icom frequently releases updates (e.g., Version 2.60 or 2.70) to support new radios like the IC-705 or IC-7760. 

Update Process: You do not usually need to re-enter your license key for minor updates. Simply download the update file from the Icom Japan Support Page and run the Update.exe.

Pre-requisite: An older version of RS-BA1 Version 2 must already be installed on the PC for the update to work.  4. Troubleshooting License & Setup Issues  RS-BA1 Version 2 | Firmware Download | Support | Icom Inc.

Table_title: Control software Download Table_content: header: | Download Type | Control software | row: | Download Type: Version | Icom Inc. RS-BA1 Version 2 INSTRUCTION MANUAL - Icom UK

RSBA1 Version 2 License Key Updated: What You Need to Know

The world of software licensing can be complex and ever-changing. For users of Autodesk's Revit software, obtaining and managing license keys is a crucial aspect of ensuring seamless workflow and compliance with software regulations. One such license key that has garnered significant attention is the RSBA1 version 2 license key. In this article, we'll explore the ins and outs of the RSBA1 version 2 license key, its updates, and what it means for users.

Understanding RSBA1 Version 2 License Key

The RSBA1 version 2 license key is a specific type of license key used to activate and validate Autodesk Revit software. Revit is a popular building information modeling (BIM) tool used by architects, engineers, and construction professionals worldwide. The RSBA1 version 2 license key is designed to provide users with access to the full range of Revit's features and functionalities.

What is a License Key?

A license key is a unique code used to activate and validate software. It serves as a digital signature, ensuring that the software is genuine and that the user has obtained it through authorized channels. License keys are typically generated based on the software version, product type, and user information.

Why is the RSBA1 Version 2 License Key Updated?

The RSBA1 version 2 license key may require updates due to various reasons, such as:

1. Software updates: Autodesk regularly releases updates to Revit, which may include new features, bug fixes, or security patches. These updates might necessitate a corresponding update to the license key to ensure compatibility and continued access to the software.
2. Changes in licensing policies: Autodesk may modify its licensing policies, requiring users to obtain updated license keys to comply with new regulations.
3. Security measures: To prevent software piracy and unauthorized use, Autodesk might introduce new security measures that require updated license keys.

Consequences of Not Updating the RSBA1 Version 2 License Key

Failure to update the RSBA1 version 2 license key can lead to:

1. Software deactivation: If the license key is not updated, the software may become deactivated, limiting or preventing access to its features and functionalities.
2. Error messages: Users may encounter error messages or warnings indicating that the license key is invalid or has expired.
3. Compliance issues: Using outdated or invalid license keys may lead to compliance issues, potentially resulting in fines or penalties.

How to Update the RSBA1 Version 2 License Key

To update the RSBA1 version 2 license key, users can follow these steps:

1. Check for updates: Visit the Autodesk website or check the software's built-in update mechanism to see if an updated license key is available.
2. Contact Autodesk support: Reach out to Autodesk's customer support team to request an updated license key or to inquire about the necessary steps to take.
3. Log in to Autodesk account: Users can log in to their Autodesk account to check for available updates or to request a new license key.

Best Practices for Managing License Keys

To avoid issues related to license keys, users should:

1. Keep track of license keys: Maintain a record of all license keys, including the RSBA1 version 2 license key, to ensure easy access and updates.
2. Monitor software updates: Regularly check for software updates and new license key requirements.
3. Communicate with Autodesk: Establish a relationship with Autodesk's customer support team to stay informed about licensing requirements and updates.

Conclusion

The RSBA1 version 2 license key is a critical component of Autodesk Revit's licensing mechanism. Staying up-to-date with the latest license key updates ensures that users can continue to access the software's features and functionalities without interruptions. By understanding the importance of license key updates and following best practices for managing license keys, users can minimize potential issues and maintain compliance with software regulations.

Additional Tips and Resources

• Always purchase license keys from authorized Autodesk resellers or the Autodesk website.
• Make sure to read and understand Autodesk's licensing terms and conditions.
• Regularly back up license key information and software settings.
• Visit Autodesk's official website for more information on licensing, updates, and support resources.

By staying informed and proactive, users can ensure seamless workflow, minimize disruptions, and get the most out of their Autodesk Revit software.

To update the license key for Icom RS-BA1 Version 2 , you must typically re-enter it during a fresh installation or by using the setup utility provided with the software. Icom does not provide a separate "update" button for license keys within the running application; the license is tied to the initial installation process. How to Update or Re-enter Your License Key

If you need to change your license key (e.g., after purchasing a new version or moving to a different PC), follow these steps: Locate Your Information : Find your Product ID License Key

. These are typically found on the sticker attached to your CD case or in the confirmation email if you purchased a digital version. Run the Installer : Insert your installation media (CD or USB) or run the from your downloaded installation folder. Enter Product Information : During the installation wizard, the Product Information

screen will appear. This is where you must enter your name, the Product ID, and the new License Key. Complete Installation

and follow the prompts to complete the setup. The software will register the new key during this process. Important Notes for Version 2 Version Compatibility rsba1 version 2 license key updated

: Version 2 is a separate product from Version 1. You cannot use a Version 1 license key for Version 2 software. One PC Limit

: Icom specifies that you can only use one license key per computer. If you install Version 2 on a PC that already has Version 1, the installer will automatically uninstall the older version. License Recovery : If you have lost your key, you may need to contact Icom America Support to recover it.

: To update the software itself to the latest version (e.g., Version 2.70), download the update file from the Icom Japan Support site and run Update.exe

. This will update your existing Version 2 installation without requiring you to re-enter the license key. Are you looking to transfer your license to a new computer, or are you having trouble with an invalid key error Ip Remote Control Software Rsba1 Crack - Facebook

Understanding the RS-BA1 Version 2 License Key System The Icom RS-BA1 Version 2 is a powerhouse software for amateur radio enthusiasts, allowing for seamless remote operation of Icom transceivers over a home network or the internet. However, managing the RS-BA1 Version 2 license key is often the most confusing part of the setup process, especially when you need to update your installation or move to a new PC. What is the RS-BA1 Version 2 License Key?

Unlike simple "plug-and-play" software, the RS-BA1 Version 2 uses a strict licensing system to protect its proprietary remote-control technology. When you purchase the software, you receive a unique 16-digit product ID and a license key. This key is required during the initial installation to:

Authorize the Remote Control Software: The main interface you use to tune your radio.

Enable the Remote Utility: The background service that handles the virtual COM port and audio connection. Why You Might Need an Updated License Key

Many users search for an "updated" license key when they encounter common roadblocks. It is important to clarify that license keys themselves do not expire; however, you may need to re-verify or "update" your status in the following scenarios:

New Version Updates: If you are moving from Version 1 to Version 2, your old key will not work. Version 2 is a paid upgrade and requires a brand-new license key.

Hardware Changes: If you have replaced your PC’s motherboard or upgraded to a new computer, the software may fail to recognize the hardware ID tied to your original activation.

Software Reinstalls: Reinstalling Windows often requires you to re-enter your original credentials. Step-by-Step: Updating Your Installation

If you already own a legitimate copy and need to update your software to the latest build (to support newer radios like the IC-705 or IC-7610), follow these steps:

Visit the Official Icom Support Site: Always download updates directly from the Icom Japan Global website to ensure file integrity.

Backup Your Settings: Before updating, export your connection settings and COM port configurations.

Run as Administrator: When entering your license key during an update or fresh install, ensure you run the installer as an administrator to allow the key to write to the Windows Registry properly.

Check for Firmware Compatibility: An updated RS-BA1 key is useless if your radio’s firmware is outdated. Ensure your transceiver is running the latest firmware version to match the software’s capabilities. Avoiding Unofficial "Key Generators"

You may find websites promising "updated" license keys or "cracked" versions of RS-BA1 Version 2. It is highly recommended to avoid these for several reasons:

Malware Risks: These downloads often contain keyloggers that can compromise your PC.

Connection Stability: Remote radio operation requires stable drivers. Pirated versions often suffer from "handshake" failures during VOIP transmission.

Legal Compliance: Amateur radio is a regulated hobby; using authentic software ensures you stay within the terms of service and legal operating standards. Troubleshooting Common Key Errors

"Invalid ID or Key": Double-check for typos. Icom keys often confuse the number "0" with the letter "O" or the number "1" with the letter "I."

Activation Limits: If you receive an error stating the key has been used too many times, you may need to contact Icom support to reset your activation count, especially if you have upgraded PCs multiple times.

By keeping your RS-BA1 Version 2 license key documentation safe and following the official update paths, you can enjoy the full potential of remote HF operation without technical interruptions.

Keeping Your Icom RS-BA1 Version 2 Current If you are looking to update your Icom RS-BA1 Version 2 remote control software, it is essential to distinguish between a software update (moving to a newer build of Version 2) and a software upgrade (moving from Version 1 to Version 2). How to Update RS-BA1 Version 2

Updates for Version 2 are free for existing license holders and are regularly released to support new radio models like the IC-7300MK2 or IC-7760.

Download the Latest Build: The most recent version (as of late 2025) is Version 2.80, which can be found on the Icom Japan Support page.

Installation: To apply the update, you must have an older build of RS-BA1 Version 2 already installed on your PC. Simply run the Update.exe file from the downloaded zip folder.

License Key Requirements: Standard updates typically do not require you to re-enter your license key if the software is already activated on that machine. However, you should always keep your original license key sticker safe, as Icom does not reissue lost keys. Upgrading from Version 1 to Version 2

It is important to note that there is no free upgrade path from the original RS-BA1 (Version 1) to Version 2.

New Purchase Required: Version 2 is a separate product that must be purchased from an authorized Icom dealer like GigaParts or WiMo.

Key Differences: Version 2 introduces advanced features such as Dualwatch operation, dual spectrum scopes with waterfall functions (for compatible radios like the IC-7610), and support for newer models like the IC-705. Troubleshooting License Issues

If you need to move your installation or have lost your key: RS-BA1 Version 2 | Firmware Download | Support | Icom Inc.

Updating the License Key for RSBA1 Version 2: A Step-by-Step Guide

The RSBA1 version 2 software requires a valid license key to operate. If you've received a new license key or need to update an existing one, follow these steps to ensure a smooth transition.

Why Update the License Key?

Updating the license key for RSBA1 version 2 is essential to:

• Maintain access to the software's features and functionality
• Ensure compliance with licensing agreements
• Resolve any issues related to license expiration or invalidation

Pre-Update Checklist

Before updating the license key, make sure: To update your Icom RS-BA1 Version 2 software

1. You have a valid license key for RSBA1 version 2
2. You have administrative privileges on the system where RSBA1 is installed
3. The RSBA1 software is installed and running on the system

Updating the License Key

To update the license key for RSBA1 version 2:

1. Launch the RSBA1 software: Open the RSBA1 application on the system where it's installed.
2. Access the License Key settings: Navigate to the software's settings or preferences menu, where you can find the license key management section.
3. Enter the new license key: Input the updated license key provided by the software vendor or your organization's licensing administrator.
4. Save changes: Save the updated license key settings to apply the changes.

Verification and Troubleshooting

After updating the license key:

1. Verify the license key: Check that the updated license key is correctly displayed in the software's settings or preferences menu.
2. Restart the software (if required): If prompted, restart the RSBA1 software to ensure the updated license key takes effect.
3. Test functionality: Verify that the software's features and functionality are working as expected.

If you encounter any issues during the update process, consult the software vendor's documentation or contact their support team for assistance.

Best Practices

To avoid future license key issues:

• Keep your license key documentation up to date
• Store your license key securely
• Regularly review and update your license key as needed

By following these steps and best practices, you can ensure a smooth transition to the updated license key for RSBA1 version 2. If you have any questions or concerns, don't hesitate to reach out to the software vendor or your organization's licensing administrator.

The Elusive License Key

It was a typical Monday morning for John, a software engineer at a small firm that specialized in robotics. He was working on a project to update their flagship product, the "Robotics System for Business Automation 1" or RSBA1. The project was going smoothly, but John hit a roadblock when he realized that the license key for the software was outdated.

The company had purchased a license for the original version of RSBA1, but now they were upgrading to version 2. The problem was that the new version required a new license key, which John didn't have. He tried to contact the software vendor, but they were slow to respond.

Days turned into weeks, and John's team was getting impatient. They needed the updated license key to move forward with the project. John decided to take matters into his own hands and try to find a solution.

He scoured the internet, searching for any information about the RSBA1 version 2 license key. He visited forums, read documentation, and even reached out to colleagues in the industry. Finally, after weeks of searching, John stumbled upon a post from a fellow developer who had encountered a similar issue.

The post mentioned that the software vendor had released an updated license key for version 2, and it was available on their website. John quickly accessed the website and downloaded the new license key. He installed it, and to his relief, the software updated successfully.

The team was thrilled to hear the news, and they quickly got back to work. With the updated license key, they were able to complete the project ahead of schedule. The RSBA1 version 2 was a huge success, and John's troubleshooting skills were hailed as a hero within the company.

From then on, John made sure to keep a close eye on software updates and license keys, ensuring that his team always had the latest and greatest tools to work with.

The End

Icom RS-BA1 Version 2 remains the current standard for remote IP control of Icom transceivers, with its licensing and update system built around a strictly one-time purchase model. Unlike many modern software-as-a-service platforms, Version 2 uses a physical-media-based license key that cannot be upgraded for free from Version 1. Licensing and Key Management

The "updated" aspect of the RS-BA1 Version 2 license primarily concerns its strict enforcement and the requirement for new hardware/keys even for existing users. Purchase Requirement

: Users of the original RS-BA1 (Version 1) must purchase an entirely new software package to access Version 2. There is no downloadable "key-only" upgrade path. Key Delivery

: The license key and Product ID are typically provided on a sticker attached to the physical media

(either a CD or USB flash drive) included in the retail box. Irreplaceability

: Icom explicitly states that the Product ID and License Key will not be reissued

if lost. Users are strongly advised to save the original sticker or document the keys immediately upon purchase. Single PC Limitation

: You cannot install multiple instances of RS-BA1 on one PC. Installing Version 2 will automatically prompt the uninstallation of any existing Version 1. Software Updates & Versions (As of 2024-2026) RS-BA1 Version 2 PREPARATIONS - Icom UK

The Ultimate Guide to RS-BA1 Version 2: License Keys, Updates, and Setup

For amateur radio enthusiasts using Icom transceivers, the RS-BA1 Version 2 software is the gold standard for remote operation. Whether you're looking to operate your base station from a laptop in the backyard or from halfway across the world, having a valid, updated license key is the gateway to a seamless experience.

In this guide, we’ll cover everything you need to know about the RS-BA1 Version 2 license key, how to handle updates, and why keeping your software current is vital for performance. What is RS-BA1 Version 2?

RS-BA1 Version 2 is Icom’s IP remote control software. Unlike the original version, Version 2 introduced Dualwatch operation and dual spectrum scopes for high-end rigs like the IC-7610 and IC-7851. It allows for a near-real-time interface that mimics the front panel of your radio on your PC. Understanding the RS-BA1 Version 2 License Key

When you purchase the software (typically via a physical CD-ROM or a digital download from an authorized dealer), it comes with a unique License Key and a Product ID. Is there a "Free" Updated Key?

It is a common misconception that license keys from Version 1 will work for Version 2. They do not. RS-BA1 Version 2 is a paid upgrade. If you are looking for an "updated" key, you must ensure you have purchased the Version 2 package specifically.

Caution: Avoid "crack" sites or "key generators" claiming to provide free RS-BA1 Version 2 keys. These often contain malware and, more importantly, will not allow you to access the official Icom firmware and software updates necessary for the software to function with modern Windows updates. How to Update Your RS-BA1 Version 2 Software

Even if you have your license key, the software itself needs regular updates to maintain compatibility with new radio firmware. Here is how to ensure your system is updated:

Check Your Current Version: Open the RS-BA1 Remote Control application and look at the "About" section.

Visit the Official Icom Support Site: Always download updates directly from the Icom Japan Support page.

Run the Installer: You do not usually need to uninstall the previous version. The updater will recognize your existing license key and simply patch the system files.

Firmware Sync: Ensure your radio (e.g., IC-7300, IC-9700) is also running the latest firmware, as Version 2 updates often coincide with radio-side improvements. Troubleshooting License Key Issues

If you have updated your software and your license key is suddenly rejected, check the following:

Registry Cleaning: Sometimes Windows updates can corrupt the registry path where the key is stored. Re-entering the key from your original packaging usually fixes this. Software updates : Autodesk regularly releases updates to

Virtual Machines: If you are moving the software to a new PC or a VM, remember that the license is typically intended for a single user/station setup.

Character Accuracy: It sounds simple, but ensure you aren't confusing the letter "O" with the number "0" or "I" with "1." Key Benefits of Version 2 (Updated)

Remote Power On/Off: With the correct standby settings, you can wake your radio remotely.

Low Latency Audio: Optimized for minimal lag over internet connections.

High-Resolution Scopes: Essential for spotting weak signals on the waterfall while operating remotely. Conclusion

The RS-BA1 Version 2 license key is your ticket to one of the most robust remote-shack experiences available. By keeping your software updated through official channels and ensuring your license details are stored safely, you can enjoy DXing from anywhere in the world.

Are you having trouble getting your COM port settings to sync after the latest update?

I understand you're asking about a license key update for “RSBA1 version 2,” but I can’t provide or generate actual license keys, crack codes, or any unauthorized activation materials. Doing so would violate software licensing agreements and potentially laws regarding copyright and digital rights management.

However, I can help you create a template report documenting a legitimate license key update process for internal or customer use. Below is a complete, professional-style report you can adapt for your actual licensed software.

Frequently Asked Questions (FAQ)

Q: My RSBA1 Version 2 says "License expired." Does "updated key" mean a new purchase?
A: Not necessarily. If you had a lifetime license, an "updated key" just reactivates it after a hardware change. If you had a 1-year license, you need to renew your subscription on the official site.

Q: Can I share my updated license key with another broadcaster?
A: No. Most RSBA1 licenses are node-locked to a single machine (by hardware ID). Sharing will deactivate both instances.

Q: I found a pastebin link with "rsba1 version 2 license key updated." Is it safe?
A: No. Even if the key works temporarily, these keys are often blacklisted within days. Worse, pastebin links are a known vector for phishing and tracking scripts.

Why Are Users Searching for "RSBA1 Version 2 License Key Updated"?

There are three primary reasons why this keyword is trending:

1. Expired Licenses: Many early adopters of RSBA1 Version 2 purchased time-limited licenses. When the license expires, the software reverts to a "demo mode" with limited functionality (e.g., 30-minute broadcast limits or watermarked audio). An "updated" license key restores full access.

2. Hardware Changes: If a broadcaster upgrades their studio PC or changes critical hardware components (like a network card or hard drive), the software may detect a "new machine," requiring a new license key or reactivation.

3. Lost Credentials: Some users simply lose their original purchase email or license file. Searching for an "updated key" is often a misguided attempt to recover access without contacting official support.

Conclusion: The Only Safe Path to an Updated RSBA1 Version 2 License Key

The search for an rsba1 version 2 license key updated is understandable—any broadcaster wants their software to run without interruption. However, the risks of using unauthorized keys far outweigh the short-term convenience. Malware, legal trouble, and unstable software can take your station off the air far longer than an expired license ever would.

Your safest, most professional course of action is to:

1. Check your official license status via the software’s built-in license manager.
2. Contact the developer for a legitimate updated key if needed.
3. Renew your support plan if your license has truly expired.
4. Explore open-source alternatives if a paid license is not feasible.

Remember: In radio broadcasting, reliability is everything. Don't let a counterfeit license key be the reason your station crashes during a live show.

Have you successfully renewed your RSBA1 Version 2 license? Share your experience in the comments below (official support experiences only—no crack discussions, please).

The Icom RS-BA1 Version 2 software is a premium IP remote control application for amateur radio transceivers. Unlike minor version updates (e.g., v2.50 to v2.60), moving from Version 1 to Version 2 requires a newly purchased license key and product ID. License Key & Product Information

Location of Keys: The product ID and License key are typically found on a sticker label attached to the CD case or the supplied USB flash drive.

Importance: These keys are required for every new installation and will not be reissued if lost.

Upgrading: If you own Version 1, you cannot simply download an update to get Version 2; you must purchase a physical software disc or USB from an authorized Icom dealer to obtain a valid Version 2 license. Version 2.60 Update Highlights (November 2023)

The latest version update (v2.60) is compatible with newer radio firmware for models like the IC-7300, IC-7610, and IC-705.

New Features: Includes dual-watch operation, dual spectrum scopes with waterfall functions (for supported models like IC-7851 and IC-7610), and a selectable enlarged panel size. Control Additions: Added [MUTE] buttons, RIT/ Δcap delta TX functions, and a SUB dial for more granular control. Installation & Configuration RS-BA1 Version 2 PREPARATIONS - Icom UK

The Icom RS-BA1 Version 2 is a professional IP remote control software designed to operate select Icom transceivers over a LAN or the internet. Version 2 is a paid upgrade and requires a new, independent license key; it cannot be updated for free from Version 1. Key Version 2 Features

Dualwatch & Dual Spectrum Scope: Remote users can now view both MAIN and SUB spectrum scopes simultaneously with waterfall functions. This is specifically supported for high-end models like the IC-7851, IC-7850, and IC-7610. Enhanced Interface Controls:

Resizable Panel: The control panel size can be toggled between "Normal" and "Large" for better visibility.

Indicator Click Operation: Users can click directly on display settings (like frequency digits or meter indicators) to change values.

Additional Buttons: New dedicated [MUTE] button and a SUB dial for easier sub-receiver management.

Expanded Radio Support: Version 2 adds support for newer transceivers including the IC-9700, IC-705, IC-905, and most recently, the IC-7760.

Advanced Remote Tuning: Includes support for RIT (Receiver Incremental Tuning) and Δcap delta TX functions directly from the remote interface. License Key & Installation Can someone share the RS-BA1 CD content ? : r/amateurradio

To update the Icom RS-BA1 Version 2 software, you generally need an existing valid license from an initial purchase. If you are looking for the latest software improvements (such as support for the IC-7760 in version 2.80), the update itself is typically a free download from Icom's official support site, provided you already have Version 2 installed. Key License & Update Facts

No Free Path from V1: If you are currently using the original RS-BA1 (Version 1), there is no free upgrade to Version 2. You must purchase a new software package, which includes a new Product ID and License Key. License Source

: The license key is usually provided on a sticker attached to the physical media (USB flash drive or CD case) when purchased from retailers.

Version 2.80 Update: This is the latest firmware/software update as of early 2024, adding support for new models like the Go to product viewer dialog for this item. and improving the CW keyer memory. Where to Purchase RS-BA1 Version 2 Go to product viewer dialog for this item.